IDENTIFICATION OF LANOSTANES AND THEIR POSSIBLY GEOCHEMICAL SIGNIFICANCE IN BIYANG DEPRESSION

In the study, a series of C_(30)-C_(32) lanostane homologs have been identified from Eogene source rocks and crude oils of Biyang depression in Henan Province, China. Based upon the geochemical investigations and simulating experiments, the idea that the generation of lanostane may mainly be related to the specific original organic inputs and low maturity has been proposed.     

过渡金属对分子筛担载Pd催化剂上CO氧化性能影响

分别采用共浸和连续浸渍法制备了一系列添加过渡金属的Pd-M-Ox-NaZSM-5(M=Cr，Mn，Fe，Co，Ni，Cu，Zn，Mo，Zr等)负载型催化剂．以CO氧化为探针反应，考察了不同制备方法对CO氧化性能影响，结果表明共浸法制备的各催化剂其活性明显优于连续浸渍法．详细考察了反应温度、Fe含量、氢气预还原、空速以及水蒸气等对共浸Pd-Fe-Ox-NaZSM-5催化剂上CO氧化行为影响，并应用XRD和XPS等手段对催化剂体相结构和表面状态进行了表征．结果表明：加入Fe2O3可明显提高Pd/NaZSM-5催化剂活性，且催化CO氧化的转化率随反应温度及Fe含量增加而增加；空速增加以及H2预还原作用导致Pd-Fe-Ox-NaZSM-5活性有所降低；催化剂对水蒸气较为敏感．XRD测试结果表明催化剂中Pd组分处于较高分散状态，以红铁矿形式存在的Fe2O3的引入，促进了Pd物种在NaZSM-5载体上的分散．表面XPS分析证实Fe2O3与Pd物种间存在较强的相互协同作用，且催化剂表面Pd物种处于较高氧化状态．Pd的高分散及其与Fe2O3的相互协同作用是共浸催化剂具有高活性的关键因素．     

低钴AB5型稀土系贮氢电极合金的研究

为了进一步降低AB5型混合稀土系贮氢合金的成本,采用Cr,Si,Cu替代Co和调节化学计量比的方法制备低钴AB5型贮氢合金。结果表明:3种取代元素在寿命方面的效果依次为Si>Cr>Cu,在放电容量和活化性能方面依次是Cu>Cr>Si。Cr,Cu,Si只有少量的替代才可能发挥其有利影响;通过非化学计量比的调节,低钴混合稀土系贮氢电极合金的放电容量、活化性能及倍率放电能力都能较好地达到实用要求,但是循环寿命有待提高。     

低温燐光的研究及应用

本文综述了44篇文献,介绍低温燐光的发展概况及其应用。     

玉米芯与低密度聚乙烯混合物在氢气气氛下的催化热解研究

本文研究了在氢气氛围及HZSM-5、H-Beta、NaY和TiO2催化剂作用下玉米芯与LDPE混合物(重量比2∶8)的共热解情况。通过催化热解所得油相液体的烃族分析及碳数分布发现:在催化剂作用下,油相液体的碳数分布变窄,共同热解所得气体产率最高的是H-Beta催化体系,液体产率最高的是NaY,残渣量最多的是TiO2催化体系。催化共热解所得油相液体的碳数分布主要集中在C4~C19之间,使用NaY可获得高品位的油相液体,其研究法辛烷值(RON)为97.5;水相液体中的主要物质是醋酸,加入催化剂后其含量明显增加。四种催化剂中,醋酸生成量最多的是NaY催化剂,其次是HZSM-5,最后是H-Beta和TiO2。其中在NaY催化体系作用下生成的水相液体组分中,醋酸含量为57.8%。     

低能离子散射谱分析中的荷电效应及中和作用

用低能离子散射谱（ISS）对比分析了与样品托有良好电接触的和与样品托绝比的金属银片，观察到荷电效应对ISS分析有严重影响。实验还表明在ISS分析时使用低能电子中和枪可以有效地消除荷电效应，还发现电子中和枪的使用对于惰性气体离子的中和作用无明显影响。     

Synthesis,optical, and electrochemical properties of novel copolymers on the basis of benzothiadiazole and electron‐rich arene units

Novel alternating conjugated copolymers ( P1–P6 ) consisting of an electron‐deficient benzothiadiazole and a variety of electron‐rich thiophene‐arene‐thiophene units were synthesized by palladium‐catalyzed polycondensations (Stille and Suzuki reactions), aiming at processable materials with a reduced optical band gap. The structures of P1–P6 were confirmed by ¹H NMR and ¹³C NMR, and their molecular weights were determined by size exclusion chromatography. In the Suzuki polycondensation, the role of the catalyst [Pd(PPh₃)₄ and Pd(OAc)₂] on the resulting molecular weight was investigated. Pd(OAc)₂ enhances the molecular weight of the polymers for both thiophene and phenylene bis‐boronic esters as compared with Pd(PPh₃)₄. The optical properties of the polymers were examined in solution and the solid state. The polymers with n‐octyl substituents ( P1 , P4 , P5 , and P6 ) on the thiophene rings possessed less‐planar structures as a result of torsional steric hindrance, and their absorption spectra appeared blueshifted as compared with their unsubstituted analogues ( P2 and P3 ). The electrochemical properties of the polymers were studied using cyclic voltammetry. Although the alkyl substitution affects the oxidation potential, only marginal differences in the reduction potentials were observed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2360–2372, 2002     

Effect of thermal history on crystallization and melting behaviour of lldpe

In this paper two LLDPE samples with their own structural parameters were studied by means of DSC. Experimental results show that DSC was good for revealing slight structural difference between these two samples. Furthermore, the effect of thermal history on crystallization and melting behaviour of LLDPE was observed clearly through varying conditions of thermal treatment.

---

Zusammenfassung Mittels DSC werden zwei LLDPE-Proben mit ihren eigenen Strukturparametern untersucht. Die Versuchsergebnisse zeigen, da\ sich DSC gut eignet, um gering fügige Unterschiede dieser zwei Proben nachzuweisen. Weiterhin wurde unter verschiedenen Bedingungen der Einflu\ der thermischen Vorgeschichte auf das Kristallisations-und Schmelzverhalten von LLDPE untersucht.

     

低压离子分离-化学发光在线检测过渡金属离子

 研究了低压离子 (LPIC)分离 柱后鲁米诺化学发光 (CL)检测方法 ,并分离测定了Cu2 + ,Co2 + ,Cr3 + ,Fe2 + ,Mn2 + 等 5种过渡金属离子。以草酸 柠檬酸混合溶液作为洗脱液 ,Luminol H2 O2 Mn + 作为化学发光检测体系 ,对过渡金属离子进行在线检测。测定的线性范围分别为 (mg·L-1) :Co2 + ,0 0 0 1～ 0 .1;Cu2 + ,0 1～ 6 ;Mn2 + ,0 0 6～ 4 ;Fe2 + ,0 0 3～ 5 ;Cr3 + ,0 0 2 5～ 1。检测限分别为 (μg·L-1) :Co2 + ,0 85 ;Cu2 + ,85 ;Mn2 + ,4 2 ;Fe2 + ,2 1;Cr3 + ,2 0。     

Limitations of low resolution mass spectrometry in the electron capture negative ionization mode for the analysis of short- and medium-chain chlorinated paraffins

The analysis of complex mixtures of chlorinated paraffins (CPs) with short (SCCPs, C₁₀–C₁₃) and medium (MCCPs, C₁₄–C₁₇) chain lengths can be disturbed by mass overlap, if low resolution mass spectrometry (LRMS) in the electron capture negative ionization mode is employed. This is caused by CP congeners with the same nominal mass, but with five carbon atoms more and two chlorine atoms less; for example C₁₁H₁₇³⁷Cl³⁵Cl₆ (m/z 395.9) and C₁₆H₂₉³⁵Cl₅ (m/z 396.1). This can lead to an overestimation of congener group quantity and/or of total CP concentration. The magnitude of this interference was studied by evaluating the change after mixing a SCCP standard and a MCCP standard 1+1 (S+MCCP mixture) and comparing it to the single standards. A quantification of the less abundant C₁₆ and C₁₇ congeners present in the MCCP standard was not possible due to interference from the major C₁₁ and C₁₂ congeners in the SCCPs. Also, signals for SCCPs (C₁₀–C₁₂) with nine and ten chlorine atoms were mimicked by MCCPs (C₁₅–C₁₇) with seven and eight chlorine atoms (for instance C₁₀H₁₂Cl₁₀ by C₁₅H₂₄Cl₈). A similar observation was made for signals from C₁₅–C₁₇ CPs with four and five chlorine atoms resulting from SCCPs (C₁₀–C₁₂) with six and seven chlorine atoms (such as C₁₅H₂₈Cl₄ by C₁₀H₁₆Cl₆) in the S+MCCP mixture. It could be shown that the quantification of the most abundant congeners (C₁₁–C₁₄) is not affected by any interference. The determination of C₁₀ and C₁₅ congeners is partly disturbed, but this can be detected by investigating isotope ratios, retention time ranges and the shapes of the CP signals. Also, lower chlorinated compounds forming [M+Cl]^– as the most abundant ion instead of [M-Cl]^– are especially sensitive to systematic errors caused by superposition of ions of different composition and the same nominal mass.