The investigation of neutralization process of gas-phase sewage sludge using thermal plasma method

The purpose of this research is to investigate the influence of plasma flow on the composition of gaseous phase organic waste. The experimental method and simulation program “Chemical Workbench” were used for this research. The gas phase waste was neutralized using air plasma in the temperature range of 1200–1700 K. The reactor simulation results showed that the amount of atomic oxygen and nitrogen decreases by 0.5%, meanwhile the amount of carbon monoxide increases by 0.5 percent, as the plasma forming gas is air. The investigation of percentage concentration results showed that as the temperature reaches 1700 K, the H₂ decreases by 4%, CO increases by 7%, CH₄ decreases by 0.4%, CO increases by 0.5%, N₂ decreases by 5%. The experimental measurement results of percentage concentration correlates sufficiently with simulation results for listed gas.     

Performance of a parallel viscoelastic-viscoplastic model for a microcellular thermoplastic foam on wide temperature range

This paper is concerned with the experimental testing and the constitutive modelling of a thermoplastic microcellular polyethylene-terephthalate (MC-PET) foam on the temperature range of 21–210 °C in order to investigate the temperature-dependent performance of the applied parallel viscoelastic-viscoplastic material model. By means of carefully designed uniaxial mechanical tests in temperature chamber, the viscous, elastic and yielding behaviours of the investigated material are identified, which are then applied for selecting suitable viscoelastic-viscoplastic constitutive models. The material characterization process is conducted using finite-element-based fitting method, including also the analysis of the applied numerical optimization algorithm. The fitting results are used to analyse the parameter sensitivity and to propose closed-form analytical relations for the temperature dependency of the material parameters. Finally, the utilisation of the analytical temperature functions for speeding up the parameter-fitting process is also demonstrated.     

A five-parameter fractional derivative temperature spectrum model for polymeric damping materials

To capture viscoelastic behavior of polymeric damping materials based on limited dynamic mechanical analysis tests, a simple fractional temperature spectrum model representing the viscoelastic materials is proposed in this paper and experimental tests aims at stressing the validity of the model. The storage modulus, the loss modulus, and the loss factor, are established based on the five-parameter fractional derivative model and the time–temperature superposition principle. The dynamic mechanical tests of two polymeric materials are carried out to verify this temperature spectrum model. Results indicate a good agreement between the temperature spectrum model and experimental tests at various temperature conditions. Furthermore, thermodynamic coupling of the viscoelastic material is investigated by temperature rise calculation and vibration experiment test. Comparison analysis shows that the temperature rise model can simulate the temperature rise process for the shear vibration of the constrained damping, which provide references for the damping capability, thermal damage and failure of viscoelastic material.     

Effect of working temperature on the interfacial behavior of overmolded hybrid fiber reinforced polypropylene composites

In the present study, the interfacial behavior of overmolded hybrid fiber reinforced polypropylene composites (hybrid composites) in the working temperature range from 23 °C to 90 °C was studied by experimental and constitutive methods. Monotonic and cycle loading-unloading single-lap-shear tests were employed to determine the interfacial properties of hybrid composites. The experimental results show that both interfacial shear strength and shear stiffness decrease with increasing working temperature. A regression function was adopted to evaluate the decaying degree of interfacial properties with increasing working temperature. The shear stress-displacement relationship under monotonic loading exhibits nonlinear behavior after an initial elastic region. The envelope lines of shear stress-displacement of hybrid composites under cyclic loading indicate that the nonlinearity in the curve is caused by the plastic deformation of polypropylene in the interphase region. A constitutive model was built to describe the nonlinear shear stress-displacement relation of hybrid composites at different working temperatures. A full suite of temperature-dependent plastic parameters in the model was obtained from cyclic loading-unloading tensile tests. The predicted shear stress–displacement curves agreed well with experimental results from different working temperatures. In addition, the failure mode of hybrid composites varied with working temperature.     

温度对乙醇电催化氧化的影响

升高温度可以提高反应速率和增加物质的输运,因此通过不同温度下反应机理的研究可以深入理解电催化过程,对催化剂的设计具有指导意义。本工作初步建立了变温原位红外测定方法。采用温控电极,用电势测温法进行温度的校准,实验得出控温仪器加热温度Th与电极表面温度TS的关系为T_S=0.57T_h+7.71 (30°C T_h≤50°C);T_S=0.62T_h+5.12 (50°C T_h≤80°C),误差分析最大温差为1°C。利用该方法我们研究了商业Pt/C催化剂在不同温度下乙醇的电氧化过程。从循环伏安图可以明显看到随着温度的升高整体氧化电流增大,起始电位、峰电位均负移,说明热活化使得氧化反应更容易进行;第一个峰电流与第二个峰电流的比值用于定性评估CO_2的选择性,对比25°C,商业Pt/C催化剂在65°C下第一峰提高30%,说明高温有利于C―C键的断裂。对比25°C的原位红外谱图,我们发现35°C及50°C下商业Pt/C催化剂上CO_2产物的起始电位负移200 m V,说明高温下,Pt/C催化剂能在更低的电位提供含氧物种;而CH_3CHO、CH_3COOH起始电位不随温度变化。用CO_2与CH_3COOH的积分面积比来评估CO_2选择性,发现高温低电位其选择性最高,说明高温低电位有利于乙醇完全氧化生成CO_2,而高温高电位下表面吸附含氧物种占据了活性位,阻碍C―C键断裂。     

Non-linear axisymmetric response of functionally graded shallow spherical shells under uniform external pressure including temperature effects

This paper presents an analytical approach to investigate the non-linear axisymmetric response of functionally graded shallow spherical shells subjected to uniform external pressure incorporating the effects of temperature. Material properties are assumed to be temperature-independent, and graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of constituents. Equilibrium and compatibility equations for shallow spherical shells are derived by using the classical shell theory and specialized for axisymmetric deformation with both geometrical non-linearity and initial geometrical imperfection are taken into consideration. One-term deflection mode is assumed and explicit expressions of buckling loads and load-deflection curves are determined due to Galerkin method. Stability analysis for a clamped spherical shell shows the effects of material and geometric parameters, edge restraint and temperature conditions, and imperfection on the behavior of the shells.     

Synthesis and Sm/Sm doping effects on photoluminescence properties of Sr4Al14O25

Complete and partial samarium reduction was achieved under strong reducing atmosphere by solid-state and combustion synthesis of Sr_3.96Sm_0.04Al₁₄O₂₅. Dependence of different fluxing agents on the formation of various strontium aluminates was examined. The samples were investigated by X-ray powder diffraction, temperature dependent luminescence decay and photoluminescence measurements. Excitation with UV radiation resulted in sharp and well resolved emission lines of samarium ions. Distinct temperature behavior for Sm²⁺ and Sm³⁺ were detected in the range of 100-500 K. Estimated emission thermal quenching values (TQ_1/2) for divalent samarium were approximately 270 K while for trivalent state around 660 K. Measured luminescence decay values of Sm²⁺ are substantially lower than for Sm³⁺,≈1.7 and ≈2.7 ms, respectively. The spectral feature of Sm²⁺ emission spectrum indicates that dopant occupies low symmetry site in Sr₄Al₁₄O₂₅ compound.     

Measurements of self-broadening and self-pressure-induced shift parameters of the methane spectral lines in the 5556-6166 cm range

The absorption spectra of methane at different path lengths and different pressures for three temperatures 180, 240 and 296 K have been recorded in the 5556-6166 cm⁻¹ region using the Bruker IFS 120 HR and 125 HR high-resolution Fourier transform spectrometers. The multispectrum fitting procedure has been applied to these spectra to recover the spectral line parameters. The main goal of this procedure was the determination of self-broadening and self-pressure-induced shift coefficients and the exponents of their temperature dependences. These parameters have been derived for 406 assigned lines with good values of the signal to noise ratio. The rotational dependence of these parameters is discussed.     

A parallel-multipoint fiber-optic temperature sensor based on Fresnel reflection

A parallel-multipoint fiber-optic temperature sensor for monitoring ambient temperature with a measured temperature resolution of approximately 0.03 °C is presented. The sensor relies on the temperature-dependent Fresnel reflection from each interface between a sensing fiber tip and a thermo-optic medium. An arrayed waveguide grating is used to achieve wavelength-division multiplexed-multipoint sensing. Applying the relative-intensity technique, the errors resulting from fluctuation of the light source and other influences of the environment are eliminated, and the stability for long time measurement can be improved.     

Near-infrared emission bands of Er-doped YAP and LSO crystals

The ground state absorption (GSA), photoluminescence (PL) and photoluminescence excitation (PLE) spectra for Er(1.0 at%):YAP and Er(0.5 at%):LSO were measured at room temperature. Based on the GSA spectra, the radiative transition rates and luminescence branch ratios of erbium ions were determined by the Judd-Ofelt (J-O) method. In the range of 1400-1700 nm Er(1.0 at%):YAP has intense absorption at 1509 nm (0.96×10⁻²⁰ cm²), which is almost two times larger than the peak absorption of Er(0.5 at%):LSO. From the PL and PLE spectra, four intense emission bands around 850 nm (⁴S_3/2→⁴I_13/2), 980 nm (⁴I_11/2→⁴I_15/2), 1230 nm (⁴S_3/2→⁴I_11/2) and 1520 nm (⁴I_13/2→⁴I_15/2) were observed. The stimulated emission cross-sections of the four bands were calculated by the Fuchtbauer-Ladenberg (F-L) equation. The results suggest that Er(1.0 at%):YAP has potential to realize laser oscillation at 858 nm because of the relatively large simulated emission cross-section (1.76×10⁻²⁰ cm²). The temperature dependences of the PL spectra for the two crystals were also investigated in the range of 290-12 K. The ∼1520 nm emission presents continuous increase with temperature, while the emissions around 850, 1230 and 980 nm firstly increase with temperature, then reach their own largest values at the transition temperatures (about 100 K), and finally decrease with temperature. These results were well interpreted by the temperature dependence of multi-phonon process.