Modification of Escherichia coli single-stranded DNA binding protein with gold nanoparticles for electrochemical detection of DNA hybridization

The unique binding event between Escherichia coli single-stranded DNA binding protein (SSB) and single-stranded oligonucleotides conjugated to gold (Au) nanoparticles is utilized for the electrochemical detection of DNA hybridization. SSB was attached onto a self-assembled monolayer (SAM) of single-stranded oligonucleotide modified Au nanoparticle, and the resulting Au-tagged SSB was used as the hybridization label. Changes in the Au oxidation signal was monitored upon binding of Au tagged SSB to probe and hybrid on the electrode surface. The amplified oxidation signal of Au nanoparticles provided a detection limit of 2.17 pM target DNA, which can be applied to genetic diagnosis applications. This work presented here has important implications with regard to combining a biological binding event between a protein and DNA with a solid transducer and metal nanoparticles.     

The electrochemistry and determination of Ligustrazine hydrochloride

Ligustrazine is one of the active ingredients contained in Ligusticum chuanxiong Hort. (Umbelliferae), which is widely used in traditional Chinese medicine for the treatment of cardiovascular problems. In this work, the electrochemistry of Ligustrazine hydrochloride (LZC) and its determination are investigated. The detection limit is estimated to be 8.0×10^–8 M, with three linear ranges from 1.0×10^–6 to 1.0×10^–4 M, 1.0×10^–4 to 5.0×10^–4 M, and 6.5×10^–4 to 1.6×10^–3 M. The method has been proved to be highly sensitive, selective, and stable, and has been successfully applied to determining LZC in LZC injections.     

Determination of Some Heavy Metal Ions with a Carbon Paste Electrode Modified by Poly(glycidylmethacrylate‐methylmethacrylate‐divinylbenzene) Microspheres Functionalized by 2‐Aminothiazole

A carbon paste electrode modified with 2‐aminothiazole functionalized poly(glycidylmethacrylate‐methylmethacrylate‐divinylbenzene) microspheres was used for trace determination of mercury, copper and lead ions. After the open‐circuit accumulation of the heavy metal ions onto the electrode, the sensitive anodic stripping peaks were obtained by square wave anodic stripping voltammetry (SWASV)). Many parameters such as the composition of the paste, pH, preconcentration time, effective potential scan rate and stirring rate influence the response of the measurement. The procedures were optimized for most sensitive and reliable determinations of the desired species. For a 10‐min preconcentration time in synthetic solutions at optimum instrumental and experimental conditions, the detection limit (LOD) was 12.3, 2.8 and 4.5 μg L^?1 for mercury, copper and lead, respectively. The limits of detection may be enhanced by increasing the preconcentration time. For example, LOD of mercury and copper was 4.9 and 1.0 μg L^?1 for fifteen minutes preconcentration time. The sensitivity may also considered to be increased by using a more suitable electrode composition targeting the more conductive electrode with lesser amount of modified polymer for sub‐μg L^?1 levels of heavy metal ions. The optimized method was successfully applied to the determination of copper in tap water and waste water samples by means of standard addition procedure. The copper content found was comparable with the certified concentration of the waste water sample. The calibration plots for mercury and lead spiked real samples were also drawn.     

Synthesis, EPR spectrum and X-ray structure of tetra-n-butylammonium bis(benzene-1,2-dithiolato(2−)-κS,S′)platinate(III)

The new salt, tetra-n-butylammonium bis(benzene-1,2-dithiolato(2−)-κ²S,S′)platinate(III), [NBu₄][Pt(C₆H₄S₂)₂] (1), has been synthesized in ethanol/water, and fully characterized by single crystal X-ray structure determination. The central platinum in the complex ion [Pt(bdt)₂]⁻ is tetracoordinated by the S atoms of the bdt²⁻ ligands (bdt²⁻ is benzene-1,2-dithiolate) in a square-planar geometry. The well-resolved frozen solution EPR spectrum exhibits rhombic symmetry. The room temperature effective magnetic moment (μ_eff = 1.80 Bohr magneton) is in line with this spectrum and strongly supports the Pt(III) oxidation state in 1. This observation is in excellent agreement with previous results reported on closely related Ni(III), Pd(III) and Pt(III) species.     

Construction of Modified Carbon Paste Electrode for Highly Sensitive Simultaneous Electrochemical Determination of Trace Amounts of Copper (II) and Cadmium (II)

A chemically modified electrode was constructed for rapid, simple, accurate, selective and highly sensitive simultaneous determination of Cu(II) and Cd(II) using square wave anodic stripping voltammetry. The electrode was prepared by incorporation of SiO₂ nanoparticles, coated with a newly synthesized Schiff base, in carbon paste electrode. The limit of detection was found to be 0.28 ng mL^?1 and 0.54 ng mL^?1 for Cu(II) and Cd(II), respectively. The proposed chemically modified electrode was used for the determination of copper and cadmium in several foodstuffs and water samples.     

Electrochemical Detection of Lead Ion Based on a Peptide Modified Electrode

A novel biosensor harnessing a peptide layer which has specific affinity to lead ion proved to be highly effective for electrochemical analysis of lead ions. The peptide modified electrode was used for the electrochemical analysis of various trace metal ions by square wave voltammetry. Compared to the other ions investigated, the peptide modified electrode was found to be highly selective to Pb²⁺ in the range of 50–700 nM. Furthermore, the biosensor exhibited a high reusability and good spike recovery in the tap water containing various concentration of Pb²⁺.     

Manganese Detection Using Stencil‐printed Carbon Ink Electrodes on Transparency Film

Mn concentrations were determined using square‐wave cathodic stripping voltammetry (CSV) with inexpensive, stencil‐printed carbon ink electrodes generated on polypropylene transparency films. Using an optimized pH 5 ammonium acetate buffer and addition of 1,4‐benzoquinone, a detection limit as low as 500 nM (30 ppb) was achieved. Addition of 1,4‐benzoquinone improved peak potential reproducibility and height, while addition of 3.5 % w/w sodium chloride to the background solution approximately doubled the sensitivity (μA/ppm). Tolerance tests with interfering metals were conducted and the method was found to be resilient to chromium(VI), iron(III), magnesium(II), nickel(II), and zinc(II), but susceptible to aluminum(III), copper(II), iron(II), and lead(II) at concentration ratios at or below one. This technique was successfully used to measure Mn levels in yerba mate and green tea samples as an example application.     

Solid Phase Extraction – Voltammetric Coupled Detection of Caffeine in Acetonitrile

Caffeine (CAF) in aqueous solutions was extracted into acetonitrile (MeCN) using solid phase extraction (SPE). The voltammetric detection of CAF in MeCN was performed in a microcentrifuge tube after SPE in order to minimise the required amount of MeCN and reagents used during the analysis. The voltammetric determination of CAF from a range of beverages extracted into MeCN was in good agreement with the results obtained from HPLC measurements on the same samples. The SPE‐coupled voltammetric method gave more accurate results than those obtained via the direct voltammetric detection of CAF in real beverage samples.     

方形自聚焦透镜的研制

经过方形玻璃丝的加工、离子交换及成品的精密加工等过程，成功制出了方形自聚焦透镜.并采用聚焦成像和雅明干涉等方法对其光学特性进行测试，得出了方形自聚焦透镜本身所具有的一些特性：中心部分畸变较小，成像性能好；四个棱角内的球差较大，像质较差;折射率分布不具有旋转对称性，而是与方向和半径有关.     

Analysis of combined conduction and radiation heat transfer in presence of participating medium by the development of hybrid method

The current study addresses the mathematical modeling aspects of coupled conductive and radiative heat transfer in the presence of absorbing, emitting and isotropic scattering gray medium within two-dimensional square enclosure. A blended method where the concepts of modified differential approximation employed by combining discrete ordinate method and spherical harmonics method, has been developed for modeling the radiative transport equation. The gray participating medium is bounded by isothermal walls of two-dimensional enclosure which are considered to be opaque, diffuse and gray. The effect of various influencing parameters i.e., radiation-conduction parameter, surface emissivity, single scattering albedo and optical thickness has been illustrated. The adaptability of the present method has also been addressed.