Synthesis and structural characterization of [SiMe2(C5H4)2][(C5Me5) Zr(μ-S)]2. a dinuclear zirconocenophane complex with a skewed dimethylsilyl-bridged bis(cyclopentadienyl) ligand

The reaction of [SiMe₂(C₅H₄)₂][(C₅Me₅)ZrMe₂]₂ with H₂S at 110°C proceeds with the formation of [SiMe₂(C₅H₄)₂][(C₅Me₅)Zr(-S)]₂]₂. The molecular structure of this dinuclear zirconocenophane compound features a non-planar four-membered Zr₂(-S)_{2 2} ring with two symmetrically-bridging sulfido groups. The bridging dimethylsilyl-bridged bis(cyclopentadienyl) ligand adopts a skewed orientation to accommodate the long Zr ... Zr separation of 3.611(1) Å. This compound crystallizes in the centrosymmetric space group P1 with refined lattice parameters ofa = 10.905(1) Å,b = 10.939(2) Å,c = 14.621(2) Å, = 106.32(1)°, = 91.25(1)°, = 111.25(1)°,V = 1545.1(8) ų, _calc. = 1.512g/cm³,Z=2. Full-matrix refinement converged with final discrepancy indices of R(F _o = 0.045 andR(F _o) = 0.079 with GOF= 1.60 for 4403 data withF _o > 3(F _o).This paper is dedicated to Professor Larry Dahl, a valued friend and mentor, on the occasion of his 65th birthday and in recognition of his significant fundamental contributions to the field of metal cluster chemistry. May the Goddess Fortuna continue to bring distinction and honor to him and his research endeavors.     

Comparative properties of siloxane vs phosphonate monolayers on a key titanium alloy

A direct comparison of surface loading, interface shear strength, and interface hydrolytic stability was made between a phosphonate and two siloxane monolayers formed on the native oxide surface of Ti-6Al-4V. Surface loading for the phosphonate was ca. four times greater (on a nanomole/area basis) than for the siloxanes; mechanical strengths per surface-bound molecule were comparable, but the hydrolytic stability (pH 7.5) of the siloxanes was poor. These results suggest that phosphonate monolayer interfaces are more desirable than comparable siloxane ones for applications where such interfaces contact even slightly alkaline water.     

Evolution of self-assembled silica-tetrapropylammonium nanoparticles at elevated temperatures

The time evolution of silica nanoparticles in solutions of tetrapropylammonium (TPA) has been studied using a combination of small-angle scattering, conductivity, and pH measurements to provide the first comprehensive analysis of nanoparticle structural and compositional changes at elevated temperatures. We have found that silica-TPA nanoparticles subjected to hydrothermal treatment (70-90 degrees C) grow via an Ostwald ripening mechanism with growth rates that depend on both pH and temperature. Small-angle X-ray (SAXS) and neutron (SANS) scattering confirm that the core-shell structure of the particles, initially present at room temperature, is maintained during heating, but an evolution toward sphericity is evidenced especially at high values of pH. SAXS absolute intensity calculations were utilized to calculate the changes in nanoparticle composition and concentration over time. These changes along with the conductivity and pH measurements and SANS contrast matching studies indicate that, upon heating, TPA becomes embedded in the core of nanoparticles giving rise to more zeolitic-looking nanomaterials.     

Synthesis and characterization of Di-π-cyclopentadienyl- metal pentasulfides of titanium(IV) and vanadium (IV):an operational test of the influence of an unpaired electron on the molecular geometry

Our preparation of Ti(h⁵?C₅H₅)₂ S₅ by the reaction of elemental sulfur with Ti(h⁵?C₅H₅)₂(CO)₂ in hexane and of V(h⁵?C₅H₅)₂S₅?$\text{1}\text{2}$ H₂O by the reacti of V(h⁵?C₅H₅)₂ Cl₂ with Na₂S₅ in THF and structural analyses by single crystal X-ray diffraction (together with infrared, solution EPR, and temperaturedependent magnetic susceptibility measurements) represent an extension of our previous work on M(h⁵?C₅H₅)₂ (SC₆H₅)₂ (M = Ti, V). The crystallographic results provide further support of our previous conclusions that the Ballhausen—Dahl model is not valid for M(h⁵?C₅H₅)₂L₂ systems. The structuralfeatures of the chair-like titanium and vanadium pentasulfide molecules are compared to the corresponding phenylmercapto analogs and to the chair-like cyclohexasulfur molecule in rhombohedral sulfur. Ti(h⁵?C₅H₅)₂S₅ was isolated as a mixture of monoclinic and orthorhombic Crystalline phases-which were both characterized by preliminary X-ray data. A complete Structural determination and refinement of the monoclinic phase, which contains two independent molecules in a cell of dimensions a 22.843(2), b 7.958(1), c 14.465(1) Å, β 90.074(4)° and symmetry P2₁/c, yielded R₁ 5.3 % and R₂ 5.9 % for 2168 independent diffractometry-collected data with I≥ 2.5o(I). V(h⁵?C₅H₅)₂S₅-$\text{1}\text{2}$ H₂O contains four V(h⁵?C₅H₅)₂S₅ molecules and two water molecules of hydration (of crystallographic site symmetry C₂-2) in onorthorhombic unit cell of symmetry P2₁2₁2 and of dimensions a 13.491(1), b 12.748(1), c 7.715(1) Å. Least-squares refinement of 750 diffractometry data with I≥2.0σ(I) gave R₁ 2.4% and R₂ 3.0% Both of these compounds were independently synthesized and Spectroscopically characterized by Köpf and co-workers, and-a Complete X-ray diffraction study was performed by Epstein and Bernal on a different monoclinic phase of Ti(h⁵?C₅H₅)₂S₅ (isolated by-Köpf). An extraction of V(h⁵?C₅H₅)₂S₅ with re fluxing benzene under nitrogen atmosphere in a Soxhlet apparatus led to the formation of the previously reported [V₂ (h⁵?C₅H₅)₂S₅]_n compound which was characterized by physical measurements including a preliminary X-ray diffraction study.     

Mass transfer and benzene removal from air using latex rubber tubing and a hollow-fiber membrane module

A dense-phase latex rubber tube and a polyporous propylene hollow-fiber membrane module (HFMM) were investigated for control of benzene-contaminated gas streams. The abiotic mass flux observed through the latex tube was 3.9–13 mg/(min·m²) for 150 ppm of benzene at various gas and liquid flow rates, while a 100-fold lower mass flux was observed in the HFMM. After seeding with an aromatic-degrading culture enriched from activated sludge, the observed removal was 80% of 150 ppm, corresponding toa mass flux of 45 mg/(min·m²). The observed mass flux through the HFMM during biofiltration also rose, to 0.4 mg/(min·m²). Because the HFMM had a 50-fold higher surface area than the latex tube, the observed ben zene removal was 99.8%. Compared to conventional biofilters, the two reactors had modest elimination capacities, 2.5–18 g/(m³·h) in the latex tube membrane bioreactor and 4.8–58 g/(m³·h) in the HFMM. Although the HFMM had a higher elimination capacity, the gas-phase pressure drop was much greater.     

Physically based molecular device model in a transient circuit simulator

Two efficient, physically based models for the real-time simulation of molecular device characteristics of single molecules are developed. These models assume that through-molecule tunnelling creates a steady-state Lorentzian distribution of excess electron density on the molecule and provides for smooth transitions for the electronic degrees of freedom between the tunnelling, molecular-excitation, and charge-hopping transport regimes. They are implemented in the fREEDA™ transient circuit simulator to allow for the full integration of nanoscopic molecular devices in standard packages that simulate entire devices including CMOS circuitry. Methods are presented to estimate the parameters used in the models via either direct experimental measurement or density-functional calculations. The models require 6–8 orders of magnitude less computer time than do full a priori simulations of the properties of molecular components. Consequently, molecular components can be efficiently implemented in circuit simulators. The molecular-component models are tested by comparison with experimental results reported for 1,4-benzenedithiol.     

Fully automated micro- and nanoscale one- or two-dimensional high-performance liquid chromatography system for liquid chromatography-mass spectrometry compatible with non-volatile salts for ion exchange chromatography

A one- or two-dimensional high performance liquid chromatography system for electrospray ionization mass spectrometers has been developed that is optimized for ion exchange and reversed phase separations. A unique and simple valve configuration permits the use of a variety of non-volatile salts; ammonium sulfate was used in an example of strong cation exchange separations. The system was designed and evaluated for both micro- and nanoflow chromatography. The peptide detection limit was approximately 100 fmol for micro- and 20 fmol for nanoflow, demonstrating the concentration and mass sensitivity improvements expected with nanoelectrospray ionization. The 1D/2D-HPLC MS system is fully automated for routine peptide analyses, compatible with direct injection of proteolytic digests, and exhibits chromatographic reproducibility and sensitivity. Software permits operator selection of either a 1D or 2D configuration with corresponding system parameters as required for individual samples. The hardware elements and resulting performance are described in this paper.     

Facile construction and divergent transformation of polycyclic isoxazoles: direct access to polyketide architectures

[reaction: see text] Base-promoted cyclocondensation of C-chloro oximes with cyclic 1,3-diketones affords functionalized isoxazoles in good yield and under convenient reaction conditions. This process enables the synthesis of highly substituted products with notable functional group tolerance. The products obtained are directly converted to a variety of polyketide-derived polycyclic structures including xanthenes, anthracenes, and benzophenones.     

Improved preparation and new reactions of β -(1-phenylthio) cyclopropyl enones

β-(1-Phenylthio)cyclopropyl enones can be conveniently prepared via reaction of the lithium salts of α-hydroxymethylene ketones with 1-lithio-1-phenylthiocyclopropane and are converted efficiently by treatment with aqueous acid to γ-keto cyclobutanones and less successfully by thermolysis to -γ-keto phenylthiocyclopentenes.     

Preferential solubilization of dodecanol from dodecanol-limonene binary oil mixture in sodium dihexyl sulfosuccinate microemulsions: effect on optimum salinity and oil solubilization capacity

Solubilization of dodecanol-limonene binary oil mixtures has been studied in saturated Winsor type I and III sodium dihexyl sulfosuccinate microemulsions. The systems showed different oil solubilization behavior below and above dodecanol volume fraction 0.2. Below 0.2 dodecanol volume fraction regular Winsor type microemulsions formed. The oil solubilization was characterized in this concentration range by the optimum salinity and the maximum characteristic length. Dodecanol showed Langmuirian-type surface excess adsorption at the vicinity of the surfactant layer. Variation of the optimum salinity and middle phase characteristic length with increasing dodecanol concentration could be linked to changes in the dodecanol surface excess. These relationships were used to develop new mathematical models for the optimum salinity and characteristic length as a function of oil phase composition. Both models yield excellent agreement with the data. Above dodecanol volume fraction 0.2 regular Winsor type III microemulsions are not formed. Therefore our new models are not applicable in this concentration range.