Imine Derivatives of Fumaraldehyde From Oxidation of A β-Aziridinyl Alcohol

Oxidation of a β-aziridinyl alcohol with tetrapropylammonium perruthenate yields a pyrrole and two unusual imine derivatives of fumaraldehyde.     

SYNTHESIS OF (S,S)-BIS(4-ALKYLOXAZOLIN-2-YL-METHYL)-1,5-DIAZACYCLOOCTANE

ABSTRACT

Synthesis of a series of new chiral tetradentate ligands ((S,S)-1,5-bis(4-alkyloxazolin-2-yl-methyl)-1,5-diazacyclooctane) is described.     

Simultaneous Determination of Barbital and Thiobarbituric Acid by Derivative Spectrophotometry

A new method for the simultaneous determination of barbital and thiobarbituric acid by derivative spectrophotometry is proposed. The method allows the resolution of mixtures of the two components over the concentration ranges 0.37–4.70 μg/ml (barbital) and 0.40–4.50 μg/ml (thiobarbituric acid) provided the ratio between their concentrations does not exceed 5:1. It was applied to the determination of the two compounds in synthetic samples and blood serum.     

A scalable synthesis of 1-amino-5-cyanonaphthalene,a precursor for a nitric oxide probe(NO550) designed via the "dye assembly" principle

A convenient and scalable synthesis of l-amino-5-cyanonaphthalene was described.     

Development and evaluation of microfluidic device for the determination of organophosphorus pesticide incorporating monolith based immobilized AChE with spectrophotometric detection

A spectrophotometric microfluidic bioreactor system is described for the determination of organophosphorus pesticides. The glass chip was designed and fabricated for in situ monolithic preparation and subsequently acetlycholineserase (AChE) immobilization via a covalent bonding method. The porous polymer monolith was prepared using glycidyl methacrylate, ethylenedimethacrylate and 2,2-dimethoxy-1,2-diphenylethan-1-one in binary porogenic solvents of cyclohexanol and dodecanol. The epoxide groups of monolith were reacted with ethylenediamine and gluteraldehyde to allow immobilization of the enzyme using their amine groups. Organophosphorus pesticides can be determined by measuring their inhibition effect on the enzyme AChE using Ellman's reaction. A linear relationship between the absorbance and percentage inhibitions was obtained over the concentration range of 0.25 to 2.50?mg?L^?1 paraoxon with a correlation coefficient (r ²) of 0.9974. The limit of detection (LOD) defined as 10% inhibition (I ₁₀) was 0.17?mg?L^?1 for paraoxon. The relative standard deviations (RSD) of 1.0?mg?L^?1 paraoxon was 3.73% (n?=?5). The proposed µFI system incorporates efficient enzyme immobilization and reduces reagent consumption and waste production and could thus be considered to be more environmentally friendly.     

Dispersive liquid–liquid microextraction and spectrophotometric determination of cobalt in water samples

A new simple and rapid dispersive liquid–liquid microextraction has been applied to preconcentrate trace levels of cobalt as a prior step to its determination by spectrophotometric detection. In this method a small amount of chloroform as the extraction solvent was dissolved in pure ethanol as the disperser solvent, then the binary solution was rapidly injected by a syringe into the water sample containing cobalt ions complexed by 1-(2-pyridylazo)-2-naphthol (PAN). This forms a cloudy solution. The cloudy state was the result of chloroform fine droplets formation, which has been dispersed in bulk aqueous sample. Therefore, Co-PAN complex was extracted into the fine chloroform droplets. After centrifugation (2 min at 5000 rpm) these droplets were sedimented at the bottom of conical test tube (about 100 µL) and then the whole of complex enriched extracted phase was determined by a spectrophotometer at 577 nm. Complex formation and extraction are usually affected by some parameters, such as the types and volumes of extraction solvent and disperser solvent, salt effect, pH and the concentration of chelating agent, which have been optimised for the presented method. Under optimum conditions, the enhancement factor (as the ratio of slope of preconcentrated sample to that obtained without preconcentration) of 125 was obtained from 50 mL of water sample, and the limit of detection (LOD) of the method was 0.5 µg L^?1and the relative standard deviation (RSD, n = 5) for 50 µg L^?1 of cobalt was 2.5%. The method was applied to the determination of cobalt in tap and river water samples.     

A Kinetic Spectrophotometric Method to Determine the Insecticide Methyl Parathion in Commercial Formulations and the Aqueous Environment

Abstract

A simple kinetic-spectrophotometric method for the analysis of the organophosphate insecticide methyl parathien is presented. The method is based on the alkaline hydrolysis of the insecticide into its main metabolite p-nitrophenol. The influence of reaction variables (pH and temperature), and the effect of other pesticides, are discussed. The calibration graphs (initial rate, fixed time, fixed absorbance) were linear from 2 to 30μg/ml. The precision was calculated for the different methods applied, the relative standard deviation being 6.25% for 4μg/ml.

The proposed kinetic method can be applied directly to synthetic mixtures, commercial formulations and different aqueous environment, with recoveries close to 100%.     

Polymer-dispersed liquid crystal composites for bio-applications: thermotropic,surface and optical properties

Polymer-dispersed liquid crystal (PDLC) systems based on polysulfone as carrying matrix and 4-cyano-4?-pentylbiphenyl (5CB) liquid crystal (LC) were obtained as thin transparent films. The PDLC films were prepared by solvent- and thermally induced phase separation methods, with various compositions in the two components. Information on the phase separation was obtained by polarised light optical microscopy, differential scanning calorimetry and scanning electron microscopy. The PDLC composites show well-defined droplets of submicrometric size, around 650 nm for a medium content of LC and around 250 nm for a low one. The droplets show a radial configuration and a homeotropic alignment of the LC molecules within. By contact angle measurement and surface free energy calculations, it was established that self-assembling of aliphatic units of the two composite components, at droplet interface, is the driving force of the homeotropic alignment. Moreover, these data indicated the potential biocompatibility of the studied composites. The photophysical behaviour shows a better light emission of the PDLCs containing bigger droplets.     

Theoretical Studies on the Mechanistic Insertions of Singlet Methylene and Halomethylene into Polar S‒H Bonds of Methanethiol,Ethanethiol, 1-Propanethiol and 2-Propanethiol

Abstract

The insertion of ¹CH₂, ¹CHF, ¹CF₂,¹CHCl, and ¹CCl₂ into primary and secondary polar S?H bonds of methanethiol, ethanethiol, 1-propanethiol, and 2-propanethiol have been investigated at HF (Hartree–Fock), MP2 (Møller–Plesset Perturbation Theory), and DFT (density functional theory) levels using 6-31G (d, p) basis set. The insertions follow a two-step mechanism. The potential energy surface exploration identifies ylide-like structures undergoing the 1,2-sigmatropic hydrogen shift concertedly giving the thioether product. But ¹CF₂ forms weak complexes involving 1,2-hydrogen shift. The barrier height in the concerted mechanism varies with the type of carbene moiety and S?H bond. The initial interaction seems to be a function of HOMO (highest occupied molecular orbital) and LUMO (lowest unoccupied molecular orbital) energies of thiols and carbenes, respectively. The natural bond orbital charge analysis showing a net charge flow from the substrate thiol to the reagent carbene at the transition states corroborates this fact.