机械自然观的形成及科学危机的出现——科学发展的人文历程漫话之十

论述了机械自然观的形成、主要观点及其负面效应;介绍了19世纪后期出现的科学危机,分析了这种危机的本质与启示.     

OBE理念推动化工设备机械基础课程的改革实践*

以应用型人才培养为目标,探索了利用OBE理念推动化工设备机械基础课程及其课程设计的改革实践。以OBE理念为指导,结合CDIO和LBL的教学模式,提出在教学内容、平台在线课程建设、第二课堂教学、课程设计和考核方法等方面的改革方案,增强了课程的应用性和成果产出,不仅提高了学生对理论知识掌握的牢固度,更提高了学生的实践能力、对知识的灵活应用能力和创新能力,与实际应用连接更加紧密,有效地实现了高素质的应用型人才输出。     

高碱煤含钠矿物沉积层的高温熔融及多相反应过程分析

采用纯矿物试剂模拟燃用高碱煤时炉内受热面典型的灰沉积层化学组成,利用热机械分析（TMA）、TG-DSC分析、高温煅烧实验结合XRD、SEM-EDS表征方法研究了不同Na₂SO₄含量灰沉积层的高温熔融过程及矿物间的多相反应机理。结果表明,掺混Na₂SO₄后沉积层熔化特征温度显著降低,Na₂SO₄的主要反应途径与掺混比例有关,当掺混比低于20%时,Na₂SO₄与SiO₂、CaO、Al₂O₃反应主要转变为CaSO₄和钠的硅铝酸盐;掺混比大于40%时则主要与CaSO₄生成低熔点的钠钙复合硫酸盐。富Na₂SO₄沉积层颗粒在800℃时开始黏结;900-950℃时,霞石、钠长石等钠的硅铝酸盐发生低温共熔,同时Na₂SO₄和CaSO₄生成的复合硫酸盐开始熔融,逐渐形成液相;1200-1250℃时,镁黄长石与含钙矿物发生强烈共熔,温度超过1300℃后矿物完全熔融成为自由液相。     

流体静压型机械密封的三维传热数学模型及端面温度分析

建立了静环倾斜时流体静压型机械密封的三维稳态传热模型,考虑流体黏度随压力、温度的变化,建立了压力、温度的控制方程,采用有限差分法,分析研究了倾斜量、结构参数及操作参数对机械密封温度分布的影响规律.结果表明,端面的最大液膜压力和最高温度随静环倾斜量的增加而增大,倾斜量越大,压黏效应越显著;端面温升受密封的结构参数、操作参数影响明显.静环端面锥角越大,温升越小;流体注入温度越低,温升越大;动环转速越高,温升越大.     

激光多孔端面气体非接触机械密封稳定性分析

基于气体润滑理论,采用与螺旋槽端面密封的对比分析方法,研究了均匀分布激光加工多孔端面气体非接触机械密封的稳定性,数值分析了密封间隙、不对中角度和外界扰动对开启力、泄漏量、气膜刚度以及密封间隙扰动振幅等密封参数的影响规律.结果表明:多孔密封中的动压效应微弱,开启力与气膜刚度与转速无关,密封端面开启时容易发生接触磨损;多孔密封端面压力分布均匀,不对中引起的开启力波动幅度小,但是角向容易产生自激振动,密封环外侧容易发生接触磨损;多孔密封轴向气膜刚度较小,具有更小的扰动振幅,密封端面开启后有利于保持密封间隙的稳定,减少密封端面的接触摩擦.     

微机械陀螺同步解调灵敏度分析

介绍了微机械陀螺工作原理和敏感输出信号组成,针对敏感输出中含有正交误差信号和同相误差信号的情况,分析了基于单相锁定放大的解调方法对陀螺性能的影响,分析表明该方法会降低解调的灵敏度,使标度因数产生衰减,在电气噪声水平一定的情况下,会使陀螺的零偏稳定性变差。针对以上不足,研究了基于双相锁定放大的解调改进方法,首先采用两路正交参考信号测量敏感信号的相位,然后通过移相使一路参考信号和哥氏信号精确同相,进而解调得到角速度输出。分析表明,该方法可使陀螺标度因数达到最大,从而提高了陀螺灵敏度,有利于改善零偏稳定性。     

Propagation of high-power partially coherent fibre laser beams in a real environment

The propagation performance of high-power partially coherent fibre laser beams in a real environment is investigated and the theoretical model of a high-power fibre laser propagating in a real environment is established. The influence of a collimating system and thermal blooming is considered together with atmospheric turbulence and mechanical jitter. The laser energy concentration of partially coherent beams in the far field is calculated and analysed based on the theoretical model. It is shown that the propagation performance of partially coherent beams depends on the collimating system, atmospheric turbulence, mechanical jitter and thermal blooming. The propagation performance of partially coherent beams and fully coherent beams is studied and the results show that partially coherent beams are less sensitive to the influence of thermal blooming, which results in that the energy degeneration for partially coherent beams is only 50% of that for fully coherent beams. Both partially coherent beams and fully coherent beams become less sensitive to thermal blooming when the average structural constant of the refraction index fluctuations increases to 1.7 × 10^-14 m^-2/3. The investigation presents a reference for applications of a high-power fibre laser system.     

Parametric study of control mechanism of cortical bone remodeling under mechanical stimulus

The control mechanism of mechanical bone remodeling at cellular level was investigated by means of an extensive parametric study on a theoretical model described in this paper. From a perspective of control mechanism, it was found that there are several control mechanisms working simultaneously in bone remodeling which is a complex process. Typically, an extensive parametric study was carried out for investigating model parameter space related to cell differentiation and apoptosis which can describe the fundamental cell lineage behaviors. After analyzing all the combinations of 728 permutations in six model parameters, we have identified a small number of parameter combinations that can lead to physiologically realistic responses which are similar to theoretically idealized physiological responses. The results presented in the work enhanced our understanding on mechanical bone remodeling and the identified control mechanisms can help researchers to develop combined pharmacological-mechanical therapies to treat bone loss diseases such as osteoporosis.     

应用于微电容超声换能器的信号处理电路设计*

针对微电容超声换能器的输出信号特征及检测要求,文中设计了换能器的微弱信号处理电路,包括基于跨阻的微弱电流信号检测和多重反馈带通滤波电路。通过搭建水下测试平台,对电路性能及功能进行实际测试,并进行水下测距实验。实验结果表明,该电路可对微电容超声换能器输出的400 k Hz信号进行检测放大与滤波;电路的线性度为0.18%,滤波电路中心频率为396 k Hz,带宽为55 k Hz。该电路可用于CMUT的接收信号处理并应用于超声测距及成像的前端信号处理。     

多重网络增强的层状光子晶体水凝胶及应力变色响应

基于PDGI/PAAm (PDGI/SN)层状光子晶体水凝胶,制备了多重网络PDGI/PAAm-PAMPS-PAAm(PDGI/TN)水凝胶,将水凝胶浸入6 : 4(V/V)乙醇水溶液中去溶胀,记为凝胶PDGI/TN-0.6。结果表明,引入多重网络之后,PDGI/TN凝胶的溶胀率从PDGI/SN的850% ± 45%提高到1070% ± 50%,颜色从蓝色(λ_max=450 nm)变为透明,去溶胀后Bragg衍射峰为670 nm,实现凝胶的Bragg衍射峰在450－670 nm间调控。拉伸和压缩实验说明,PDGI/TN-0.6力学性能优异,拉伸强度和压缩强度分别达到0.99和37.0 MPa。同时,PDGI/TN-0.6具有优异应力变色响应性,压缩应变(ε_c)从0增加到0.5,Bragg衍射峰发生蓝移,响应范围覆盖可见光;当撤去应力后,立即恢复初始状态,可重复多次。利用扫描电镜(SEM)进一步研究了层状光子晶体水凝胶层微观结构。