在线固相萃取/高效液相色谱法测定环境水样中的4种痕量邻苯二甲酸酯

建立了一种在线固相萃取/高效液相色谱测定水样中4种痕量邻苯二甲酸酯(邻苯二甲酸甲酯、邻苯二甲酸乙酯、邻苯二甲酸丁酯和邻苯二甲酸(2-乙基)己酯)的新方法.样品由外加泵注入一根固相萃取小柱上进行富集,再将富集柱切换至高效液相色谱系统中,将富集在固相萃取小柱的邻苯二甲酸酯洗脱至分析柱进行分析.在线固相萃取柱为IonPac(...     

非等温非牛顿黏性流体流动问题的修正光滑粒子动力学方法模拟

为准确、有效地模拟非等温非牛顿黏性流体的流动问题,本文基于一种不含核导数计算的核梯度修正格式和不可压缩条件给出了一种改进光滑粒子动力学(SPH)离散格式,它较传统SPH离散格式具有较高精度和较好稳定性.同时,为准确地描述温度场的演化过程,建立了非牛顿黏性的SPH温度离散模型.通过对等温Poiseuille流、喷射流和非等温Couette流、4:1收缩流进行模拟,并与其他数值结果作对比,分别验证了改进SPH方法模拟非牛顿黏性流动问题的可靠性和提出的SPH温度离散模型求解非等温流动问题的有效性和准确性.随后,运用改进SPH方法结合SPH温度离散模型对环形腔和C形腔内非等温非牛顿黏性流体的充模过程进行了试探性模拟研究,分析了数值模拟的收敛性,讨论了不同位置处热流参数对温度和流动的影响.     

两个基于四面体型配体的镉配合物的合成、晶体结构及性质

用四面体构型的配体四[3-(羧基苯)氧甲基]甲烷(H₄L)与镉离子通过溶剂热法合成了结构不同的配合物[Cd₆L₃(DMA)₃(H₂O)]_n (1)和{[Cd₂L(H₂O)₄]·4H₂O}_n (2)(L=四[3-(羧基苯)氧甲基]甲烷)。化合物1属于三方晶系R3 空间群。每个配体通过4个羧基连接了4个三核镉簇, 每个三核镉簇连接了6个苯甲酸, 形成双节点(4, 6)-连接toc拓扑构型的三维骨架结构。配合物2属于单斜晶系C2/c空间群。每个配体连接了4个镉原子, 仍保持四面体构型。镉原子由羧基沿着b轴连接成一维链, 链与链之间通过配体连接, 且2个相邻配体的苯环之间存在π-π堆积。此外, 对化合物1和2在室温下做了固态紫外和荧光性质的研究。     

Flow patterns and boundary conditions for inlet and outlet conduits of large pump system with low head

The flow patterns in the inlet and outlet conduits have a decisive effect on the safe, stable, and highly efficient operation of the pump in a large pumping station with low head. The numerical simulation of three-dimensional （3D） turbulence flow in conduits is an important method to study the hydraulic performance and conduct an optimum hydraulic design for the conduits. With the analyses of the flow patterns in the inlet and outlet conduits, the boundary conditions of the numerical simulation for them can be determined. The main obtained conclusions are as follows： （i） Under normal operation conditions, there is essentially no pre-swirl flow at the impeller chamber inlet of an axial-flow pump system, based on which the boundary condition at the inlet conduit may be defined. （ii） The circulation at the guide vane outlet of an axial-flow pump system has a great effect on the hydraulic performance of the outlet conduit, and there is optimum circulation for the performance. Therefore, it is strongly suggested to design the guide vane according to the optimum circulation. （iii） The residual circulation at the guide vane outlet needs to be considered for the inlet boundary condition of the outlet conduit, and the value of the circulation may be measured in a specially designed test model.     

Ag3PO4/ATP纳米复合材料的制备及可见光催化性能研究

以天然矿物凹凸棒石(简称ATP)为载体,在其表面原位生成纳米Ag3PO4,制备Ag3POJATP复合光催化剂.利用X射线衍射(XRD)、透射电子显微镜(TEM)、紫外-可见漫反射光谱(Uv-vis DRS)等测试方法对复合材料的表面结构、形貌、光响应性能进行了研究.结果表明:Ag3PO4/ATP复合光催化剂中Ag3PO4-以纳米微球均匀分布在ATP表面,平均直径12.5 nm.进一步通过150 W碘钨灯下降解甲基橙(MO)的实验,研究了光催化材料的可见光催化性能.实验结果表明,Ag3PO4、Ag3PO4/ATP在可见光下具有光催化活性,Ag3PO4/ATP的光催化性能优于Ag3PO4,2.5h对甲基橙的降解率达到93.4;.     

Transporting Cold Atoms towards a GaN-on-Sapphire Chip via an Optical Conveyor Belt

Trapped atoms on photonic structures inspire many novel quantum devices for quantum information processing and quantum sensing. Here, we demonstrate a hybrid photonic-atom chip platform based on a Ga N-onsapphire chip and the transport of an ensemble of atoms from free space towards the chip with an optical conveyor belts. Due to our platform’s complete optical accessibility and careful control of atomic motion near the chip with a conveyor belt, successful atomic transport towards the chip is m...