探究Cu/ZnO相互作用对CO2加氢制甲醇反应性能的影响

Using renewable green hydrogen and carbon dioxide (CO₂) to produce methanol is one of the fundamental ways to reduce CO₂ emissions in the future, and research and development related to catalysts for efficient and stable methanol synthesis is one of the key factors in determining the entire synthesis process. Metal nanoparticles stabilized on a support are frequently employed to catalyze the methanol synthesis reaction. Metal-support interactions (MSIs) in these supported catalysts can play a significant role in catalysis. Tuning the MSI is an effective strategy to modulate the activity, selectivity, and stability of heterogeneous catalysts. Numerous studies have been conducted on this topic; however, a systematic understanding of the role of various strengths of MSI is lacking. Herein, three Cu/ZnO-SiO₂ catalysts with different strengths of MSI, namely, normal precipitation Cu/ZnO-SiO₂ (Nor-CZS), co-precipitation Cu/ZnO-SiO₂ (Co-CZS), and reverse precipitation Cu/ZnO-SiO₂ (Re-CZS), were successfully prepared to determine the role of such interactions in the hydrogenation of CO₂ to methanol. The results of temperature-programmed reduction (H₂-TPR) and X-ray photoelectron spectroscopy (XPS) characterization illustrated that the MSI of the catalysts was considerably affected by the precipitation sequence. Fourier transform infrared reflection spectroscopy (FT-IR) results indicated that the Cu species existed as CuO in all cases and that copper phyllosilicate was absent (except for strong Cu-SiO₂ interaction). Transmission electron microscopy (TEM), X-ray diffraction (XRD), and N₂O chemical titration results revealed that strong interactions between the Cu and Zn species would promote the dispersion of Cu species, thereby leading to a higher CO₂ conversion rate and improved catalytic stability. As expected, the Re-CZS catalyst exhibited the highest activity with 12.4% CO₂ conversion, followed by the Co-CZS catalyst (12.1%), and the Nor-CZS catalyst (9.8%). After the same reaction time, the normalized CO₂ conversion of the three catalysts decreased in the following order: Re-CZS (75%) > Co-CZS (70%) > Nor-CZS (65%). Notably, the methanol selectivity of the Re-CZS catalyst was found to level off after a prolonged period, in contrast to that of Co-CZS and Nor-CZS. Investigation of the structural evolution of the catalyst with time on stream revealed that the high methanol selectivity of the catalyst was caused by the reconstruction of the catalyst, which was induced by the strong MSI between the Cu and Zn species, and the migration of ZnO onto Cu species, which caused an enlargement of the Cu/ZnO interface. This work offers an alternative strategy for the rational and optimized design of efficient catalysts.     

共沉淀浸渍法制备由合成气直接合成二甲醚的Cu-Mn催化剂

采用共沉淀浸渍法,制备了直接合成二甲醚的Cu-Mn-Zn催化剂,通过对组成成分及其配比的研究,发现Cu含量一定的条件下,n(Zn)/n(Mn)摩尔比对催化剂性能有较大的影响,当n(Zn)/n(Mn)=1/3～1/2时,催化剂对CO的转化率和对二甲醚的选择性达到最佳,分别为53.6%和63.5%；如锰添加比例过大,对催化剂催化合成二甲醚有微弱抑制；添加锌比例过大,会大大降低CO的转化率。载体Y分子筛的含量对催化剂性能也有影响,用量过大将降低催化剂的活性和对二甲醚的选择性,当其含量为33%时,催化剂上CO转化率和选择性可分别达到66%和68%,且催化剂活性随分子筛含量减少不再有明显的变化。     

华北模拟实验块地大气,降水,地表径流和土壤中的稀土浓度分布及施…

通过模拟实验块地，初步了在一个土壤生态系统中稀土的浓度分布以及施用稀土微肥的影响，结果表明：降水、地表径流水溶液中的稀土浓度均为μｇ／Ｌ量级，降水中的稀土主要来源于附近地表土壤。大气中的稀土含量随粒径２有所不同，粒径越小一越低，且其来源主要是附近的水可溶性的硝酸稀土微肥在施用后很快转化为水不溶性形态，施加稀土前后实验组表层土壤中稀土含量基本相同，与对照组相比，施加的稀土微肥对地表径流水溶性和悬浮的     

负载型TiO2-聚酰亚胺亲水复合膜的制备与分离性能

采用溶解－流涎法，湿相转换法和干湿相转换法制轩了负载型ＴｉＯ２－聚酰亚胺亲水复合膜，采用扫描电镜，红外光谱，压汞和透气性实验等手段对该膜的孔径分布，表面结构及扩散性能进行了表征，并讨论了制备亲水对膜孔结构的影响，实验结果表明，三种膜均具有很好的亲水性能，而干湿相转换膜具有良好的孔径分布和分离性能。     

含Cu复合氧化物对NO和CO吸附和活化的TPSR研究

利用MS－TPD法并结合XRD、化学分析等对催化剂进行了表征，探讨了K2NiF4结构La2-x(Sr，Th)xCuO4±λ系催化剂中三个典型样品LaSrCuO4、La2CuO4和La1.7Th0．3CuO4对NO、CO及CO＋NO等小分子的吸附性能和活化规律。结果表明：NO吸附量的大小与催化剂中氧空位含量有关，吸附强度和脱附峰种类与金属离子氧化态有关。CO在氧缺陷复合氧化物催化剂上的吸附是首先变为碳酸根，并在高温以CO2物种脱出．在NO和CO的共吸附过程中，有关NO的吸、脱性能与单独NO－TPD中NO的吸脱附规律相似，表明NO在NO＋CO共吸附的竞争吸附过程中，优先吸附起决定作用，而受CO的影响较小．NO的吸附是NO活化分解的必要条件．     

利用H2与金属氧化物的选择性反应从CO中除H2

研究了一些氧化物的H2－TPR及CO－TPR行为,结果发现,Co3O4／Al2O3,NiO／SiO2,NiO和Pd／NiO的H2－TPR温度要低于它们的CO－TPR温度,特别是Pd／NiO样品,它的H2－TPR温度为598K,而其CO－TPR温度高达949K,差别为351K,因此有可能利用Pd／NiO在一定温度下选择性地与CO中的H2反应而将其除去. 实验结果表明,Pd／NiO可在603K及4000h-1的条件下从H2（0.34％）,CO（50％）和N2（余）的混合气中选择性地除去90％以上的H2,吸氢容量为每克样品55mL标准态H2.     

离子液体介导CO2化学转化研究进展

The efficient utilization of carbon dioxide (CO₂) as a C1 feedstock is of great significance for green and sustainable development. Therefore, the efficient chemical conversion of CO₂ into value-added products has recently attracted a lot of research attention in recent years. The transformation of CO₂ generally requires high-energy substrates, specific catalysts, and harsh reaction conditions due to its high thermodynamic stability and kinetic inertness. Consequently, several efforts have been dedicated toward the development of high-performance catalysts and new reaction routes for CO₂ conversion over the last few decades. To date, many routes of convert CO₂ into value-added chemicals have been proposed, together with the development of heterogeneous and homogeneous catalysts. Among the advanced catalysts reported to date, ionic liquids (ILs) have been widely investigated and show great potential for the efficient, selective, and economical conversion of CO₂ into highly valuable products under mild conditions, even under ambient conditions. Some task-specific ILs have been designed with unique functional groups (e.g., —OH, —SO₃H, —NH₂, —COOH, and —C≡N), which can act as the solvent, absorbent, activating agent, catalyst, or cocatalyst to realize the transformation of CO₂ under metal-free and mild conditions. In addition, a variety of catalytic systems composed of ILs and metal catalysts have also been reported for the transformation of CO₂, in which the combination of the IL and metal catalyst is responsible for CO₂ conversion with high efficiency. In this review article, we summarize the recent advances in IL-mediated CO₂ transformation into chemicals prepared via C—O, C—N, C—S, C—H, and C—C bond forming processes. ILs that can chemically capture CO₂ with high capacity are first introduced, which can activate CO₂ via the formation of IL-based carbonates or carbamates, thus realizing the transformation of CO₂ under metal-free and mild conditions. Recent progress in IL-mediated CO₂ transformations to form carbonates and various kinds of N- and S-containing compounds (e.g., oxazolidinones, ureas, benzimidazolones, formamides, methylamines, benzothiazoles, and other chemicals) as well as CO₂ hydrogenation to give formic acid, methane, acetic acid, low-carbon alcohols, and hydrocarbons has been summarized in this review with a focus on the reaction routes, catalytic systems, and reaction mechanism. In these reactions, ILs can simultaneously activate the substrate via strong H-bonding in addition to activating CO₂, and the cooperative effects among the ionic and molecular species and metal catalysts accomplish the reactions of CO₂ with various kinds of substrates to afford a wide range of value-added chemicals. Finally, the shortcomings and perspectives of ILs are discussed. In short, IL-mediated CO₂ transformations provide green and effective routes for the synthesis of high-value chemicals, which may have great potential for a wide range of applications.     

Reactions in a Mixture of CH4 and CO2 under the Aciton of Microwave Discharge at Atmospheric Pressure

Reactions between CH4 and CO2 under the action of continuous microwave discharge at atmospheric pressure were studied in a special homemade reactor,The main products were CO and H2,while acetylene and ethylene were also found in the products.Experimental results show that conversions of CH4 and CO2 could be higher than 90% without the presence of any catalyst,Effects of CO2/CH4 molar ratio and total flow rate of the feed gas on the reaction were also investigated.     

纳米ZrO2的合成对负载Ni催化剂的CH4/CO2重整反应的影响

采用共沉淀法、醇热合成法和干法分别合成了纳米ZrO2（ZrO2 CP、ZrO2 ET和ZrO2 S），用XRD、 BET、SEM等对其结构和表面性质进行表征，以CH4/CO2重整为探针反应研究了不同方法合成的纳米ZrO2负载Ni催化剂的催化性能，并与载体的物化性质进行了关联。实验结果表明，以干法合成的纳米介孔ZrO2 S具有较大的比表面积（133m2/g）和较好的孔径分布(4.9nm)，Ni/ZrO2 S催化剂在CH4/CO2重整反应中表现出较好的催化性能。     

掺杂ZrO＿2的Pt／Al＿2O＿3表面氧性质及一氧化碳氧化性能研究

用ＴＰＤ－ＭＳ、ＴＰＳＲ－ＭＳ及ＣＯ氧化活性测定等方法研究了Ｐｔ／Ａｌ２Ｏ３和掺杂超细ＺｒＯ２的样品的表面氧脱出－恢复性能、ＣＯ表面氧化性能及催化氧化性能．结果表明，在Ｐｔ／Ａｌ２Ｏ３中掺杂ＺｒＯ２后，样品表面上的氧物种脱出和氧化恢复性能明显提高，脱氧量也明显增大；并发现在ＣＯ－ＴＰＳＲ过程中程脱物ＣＯ２的脱附量大小及峰顶温度次序与对ＣＯ的催化氧化活性也有一致的关系