热毛细对流速度场测试研究

为了探索微重力状态下表面张力驱动流速度场的测试技术，本文在地面进行了模拟实验，对位于热壁下流体中气泡周围的表面张力驱动流进行了研究，并用ＰＩＶ技术测量了流场的速度分布．     

Effect of Plasma Treatment on the Structures and Properties of Konjac Glucomannan Film

To understand the effect of plasma treatment on the Konjac glucomannan film, the nitrogen plasma was injected into the film by ion beam injection machine in this study. The structures and properties of Konjac glucomannan film after plasma treatment were analyzed by Infrared spectroscopy, Raman spectrum, X-ray, ect. The result showed that nitrogen groups appeared in the KGM molecular chain and part of this chain fractured, and the number of hydrogen bonds increased after the treatment of plasma. The form of KGM molecule remained amorphous non-crystalline state, but the crystalline region was increased and became more ordered. The mechanical property of tensile strength and breaking elongation was improved, while the WVP was decreased. The nitrogen groups were grafted on the KGM molecular chain after plasma treatment, which led to the improvement of the properties of KGM film.     

湿工况下平直翅片对流传热传质数值研究

建立了湿空气流经平直翅片通道并伴有凝结现象发生的三维对流传热传质的数值模型,在空气进口雷诺数Re为190～3770,进口相对湿度φ_(in)为50%～90%的范围内,对干湿两种工况,平直翅片通道内的换热流动进行了对比研究。结果表明:湿工况换热系数为干工况换热系数的2.8～3.1倍,干工况翅片效率比湿工况翅片效率高35.8%～41.9%。当翅片为部分湿工况时,翅片效率随进口相对湿度的增大而增大,换热系数随进口相对湿度的增大而减小;当翅片为全湿工况后,进口相对湿度对翅片效率和换热系数的影响微弱。     

在有机相酶催化反应中用盐／盐水合物控制水活度

以正己烷中脂肪酶催化仲丁醇和乙烯基乙酸酯间的转酯化制备乙酸仲丁酯的反应为模型反应，用已知水活度的盐／盐水合物对控制反应体系的水活度，研究了水活度对酶催化反应的进程和初步速度的影响。考察了盐对的比例，以及盐对的加入量对反应过程的影响，从相律角度分析了用水活度的盐／盐水合物对控制反应体系的水活度可行性。     

拉曼光谱编码的荧光液相生物芯片检测系统研究

随着医疗诊断需求的增加,生物分子检测技术越来越受到人们的重视,液相生物芯片技术作为一种高通量,多通道的分子检测手段在近几年得到了飞速发展。通过层层自组装方法制备以微片为载体的拉曼光谱编码液相生物芯片,并利用自行搭建的一套高灵敏度、高分辨率的光学系统,实现对液相生物芯片的定性与定量分析。光学系统由拉曼光谱检测系统与荧光显微成像系统耦合而成。在拉曼光谱检测系统中激光器发射出785 nm波长的激光,通过二向色镜,带反反射镜与物镜汇聚到样品上,样品产生的拉曼散射光,经物镜,带反反射镜,二向色镜与拉曼滤波片,最后通过凹透镜聚焦到光谱仪的狭缝上,光谱仪色散实现在线阵CCD上拉曼光谱的获取。荧光显微成像系统应用光学成像原理,通过调节凹透镜与405 nm的激发光之间的距离,使激发光通过物镜均匀的照射到样品之上,样品激发出的荧光,通过物镜,带反反射镜,二向色镜,滤波片与相应的凹透镜,最后成像到面阵CCD上。改进传统便携式拉曼光谱检测系统光路并选用相应波段的带反反射镜与焦距20倍的物镜完成拉曼光谱检测系统与荧光显微成像系统的耦合。为了减少两路系统之间的相互影响选用合适的二向色镜以及滤波片,在提高耦合系统获取数据的准确性中有着重要的作用。该系统通过对反应之后的液相生物芯片进行拉曼光谱检测,以完成对每个编码玻片的定性识别,即解码;同时激发反应后液相生物芯片的荧光并采集荧光强度图,根据每个解码玻片上的荧光强度值完成对目标检测物的定量分析。区别于传统荧光编码液相生物芯片, 拉曼光谱编码具有稳定性更强,光谱分辨率更高等优点。该光学系统集拉曼光谱检测系统与荧光显微成像系统于一体,解决了目前未有基于拉曼编码的液相生物芯片的检测系统的问题,并且可同时对多种目标物进行识别和定量分析,提升了实验结果的准确性。     

前躯体-喷雾干燥法制备氧化铝超细粉体

以六水氯化铝和氨水为原料,采用化学沉淀法结合喷雾干燥技术制备了氧化铝超细粉体。 实验结果表明,沉淀过程中反应体系的pH值对沉淀产物的结晶度有较大的影响。 采用喷雾干燥技术对前躯体进行干燥处理,将干燥后的粉体在管式炉中不同温度下进行煅烧,得到氧化铝超细粉体,用XRD、BET、SEM等测试技术对超细粉体性能进行了表征。 结果表明,在碱性条件下进行沉淀反应更有利于产物结晶度的提高;粉体在热处理过程的物相变化次序为：AlOOH→无定形氧化铝+γ-Al₂O₃→θ-Al₂O₃→α-Al₂O₃;通过喷雾干燥所得粉体,外形是规则的圆盘状或圆钵状,外形均一,无团聚,粒径分布范围窄,在4~10 μm之间,比表面积为391 m²/g,于1200 ℃、2 h处理后粉体的比表面积仍可达到185 m²/g。     

废弃植物油对破囊壶菌生产多不饱和脂肪酸的影响

为研究废弃植物油对破囊壶菌生产PUFA的影响, 以混合葵花籽油和橄榄油高温烹煮后的废弃油为研究对象, 比较了在常规培养基中添加植物油和废弃植物油前后破囊壶菌Thraustochy-trium sp.S-3的繁殖变化和脂肪酸组成变化. 结果表明, 添加烹调前后的植物油均能对破囊壶菌生长产生明显的促进作用, 单位体积培养基中的总脂量可增加1倍左右; 同时, 破囊壶菌的脂肪酸组成跟植物油本身的脂肪酸组成有着明显正相关, 添加废弃植物油后, 能明显增加破囊壶菌合成DHA等PUFA的能力, 同时增加了破囊壶菌中十八碳不饱和脂肪酸的含量. 研究结果对利用废弃植物油类作为碳源应用到破囊壶菌产业化生产PUFA提供了理论依据.     

Density functional theory investigation of carbon monoxide adsorption on the kaolinite(001) surface

Carbon monoxide(CO) is a gaseous pollutant with adverse effects on human health and the environment. Kaolinite is a natural mineral resource that can be used for different applications, including that it can also be used for retention of pollutant gases. The adsorption behavior of carbon monoxide molecules on the(001) surface of kaolinite was studied systematically by using density-functional theory and supercell models for a range coverage from 0.11 to 1.0 monolayers(ML). The CO adsorbed on the three-fold hollow, two-fold bridge, and one-fold top sites of the kaolinite(001) was tilted with respect to the surface. The strongest adsorbed site of carbon monoxide on the kaolinite(001) surface is the hollow site followed by the bridge and top site. The adsorption energy of CO decreased when increasing the coverage, thus indicating the lower stability of surface adsorption due to the repulsion of neighboring CO molecules. In addition to the adsorption structures and energetics, the lattice relaxation, the electronic density of states, and the different charge distribution have been investigated for different surface coverages.     

Magnetoresistance Detection of Vortex Domain in a Notched FeNi Nanowire

Revealing the physical nature of vortex wall(VW) behavior in magnetic nanostructures has been of great importance for future device concepts. Here we introduce the superior properties of VW in a notched FeNi nanowire under the action of an electronic current. The pinning-dependent VW propagation is demonstrated by a successive in-field magnetic force microscopy, an anisotropic magnetoresistance measurement, as well as micromagnetics.Based on the developed method, the propagation of VW can be effectively captured by monitoring the change of magnetoresistance in the FeNi nanowire, which sheds light on the development of future spin-based devices.