A finite element method based comparative fracture assessment of carbon black and silica filled elastomers: Reinforcing efficacy of carbonaceous fillers in flexible composites

This study is focused on numerical investigation on fracture behaviors of carbon black (CB) and silica filled elastomeric composites. Finite element analysis (FEA) in compliance with multi-specimen method is used to calculate J-integral and geometry factor of the rubber composites up to a displacement of 20 mm for single edge notch in tension (SENT) and double edge notch in tension (DENT) specimens. An empirical relationship between crack tip opening displacement (CTOD) and crack advancement is established depending on notch to width ratio (NWR). The stress contours across the notches for SENT and DENT specimens is discussed briefly. It is found that fracture propagation resistance of CB filled elastomer is 125% more than that of silica filled elastomer. Although, Silica filled elastomer have good tensile strength and crosslink density but it fails to replace carbon black in terms of fracture properties. The critical J-integral for CB filled elastomer is 18.7% and 32.2% more than silica filled elastomer for SENT and DENT specimens respectively. The effect of specimen type on various fracture properties is also explored. The factor of safety is found to be significantly more in case of CB filled elastomers making them less vulnerable to crack propagation and catastrophic failure.     

A study of the effect of step excrescences and free‐stream disturbances on boundary layer stability

In this work, a study of the mechanism by which free‐stream acoustic and vorticity disturbances interact with a boundary layer flow developing over a flat plate featuring a step excrescence located at a certain distance from a blunt leading edge is included. The numerical tool is a high‐fidelity implicit numerical algorithm solving for the unsteady, compressible form of the Navier–Stokes equations in a body‐fitted curvilinear coordinates and employing high‐accurate compact differencing schemes with Pade‐type filters. Acoustic and vorticity waves are generated using a source term in the momentum and energy equations, as opposed to using inflow boundary conditions, to avoid spurious waves that may propagate from boundaries. The results show that the receptivity to surface step excrescences is largely the result of an overall adverse pressure gradient posed by the step, and that the free‐stream disturbances accelerate the generation of instabilities in the downstream. As expected, it is found that the acoustic disturbance interacting with the surface imperfection is more efficient in exciting the Tollmien–Schlichting waves than the vorticity disturbance. The latter generates Tollmien–Schlichting waves that are grouped in wave packets consistent with the wavelength of the free‐stream disturbance. Copyright © 2015 John Wiley & Sons, Ltd.     

Wave propagation in fluid-conveying viscoelastic single-walled carbon nanotubes with surface and nonlocal effects

In this paper, the transverse wave propagation in fluid-conveying viscoelastic single-walled carbon nanotubes is investigated based on nonlocal elasticity theory with consideration of surface effect. The governing equation is formulated utilizing nonlocal Euler-Bernoulli beam theory and Kelvin-Voigt model. Explicit wave dispersion relation is developed and wave phase velocities and frequencies are obtained. The effect of the fluid flow velocity, structural damping, surface effect, small scale effects and tube diameter on the wave propagation properties are discussed with different wave numbers. The wave frequency increases with the increase of fluid flow velocity, but decreases with the increases of tube diameter and wave number. The effect of surface elasticity and residual surface tension is more significant for small wave number and tube diameter. For larger values of wave number and nonlocal parameters, the real part of frequency ratio raises.     

Propagation characteristics of tilted partially coherent rectangular flat-topped beam in turbulent atmosphere

In this paper, the effects of atmospheric turbulence on the intensity distribution of a tilted Rectangular Partially Coherent Flat-Topped (RPCFT) beam were studied. An analytical formula for the intensity distribution was derived. POWER In Bucket (PIB) value is calculated numerically. The effects of source parameters – such as correlation length, order of flatness and tilt coefficient – on the intensity were analyzed. Detailed analysis demonstrates that these parameters have an influence on beam propagation properties. The analyses are illustrated by numerical examples and graphs.     

Paraxial propagation in disclinated amorphous media

We study paraxial beam propagation along the wedge axis of a disclinated amorphous medium. The defect-induced inhomogeneity results in Berry phase and curvature that are affected by the induced uniaxial anisotropy. The Berry phase manifests itself as a precession of the polarization vector. The Berry curvature is responsible for the optical spin Hall effect in the disclinated medium, where beam deflection varies sinusoidally along the paraxial direction. Its application in determining the birefringence and the magnitude of the Frank vector is explained.     

Propagation of light in(2+1)-dimensional nonlinear optical media with spatially inhomogeneous nonlinearities

The(2 1)-dimensional nonlinear Schr(o)dinger(NLS)equation with spatially inhomogeneous nonlinearities is investigated,which describes propagation of light in(2 1)-dimensional nonlinear optical media with inhomogeneous nonlinearities.New types of optical modes and nonlinear effects in optical media are presented numerically.The results reveal that the regular split of beam can be obtained in (2 1)-dimensional nonlinear optical media with inhomogeneous nonlinearities,by adjusting the guiding parameter.Furthermore,the stability of beam regular split is discussed numerically,and the results reveal that the beam regular split is stable to the finite initial perturbations.     

Measuring the Polarization Parameters of Rain by Inverse Scattering

The theory is presented for one method of determining the effective polarization parameters of the rain medium in the problem of polarization information processing of detecting target. The determination of the effective polarization parameters of the propagation medium is from the data of propagation measurements over a line-of-sight link. The polarization parameters the effective average value, the effective standard deviation and F the effective shape parameter of the propagation medium are obtained by means of the method of inverse scattering, showing a good agreement with the data from direct measurements.     

超短超强激光脉冲在空气中长距离传输的研究进展

 介绍了超短超强激光脉冲在空气中长距离传输的最新研究进展,并分析了目前该项研究的几种理论模型,重点介绍了动态空间补给模型所给出的耦合方程及其研究结果,分析了不同情况下长距离传输模型的适用性。     

New localized Superluminal solutions to the wave equations with finite total energies and arbitrary frequencies

By a generalized bidirectional decomposition method, we obtain new Superluminal localized solutions to the wave equation (for the electromagnetic case, in particular) which are suitable for arbitrary frequency bands; several of them being endowed with finite total energy. We construct, among the others, an infinite family of generalizations of the so-called “X-shaped" waves. Results of this kind may find application in the other fields in which an essential role is played by a wave-equation (like acoustics, seismology, geophysics, gravitation, elementary particle physics, etc.). Received 23 June 2002 Published online 24 September 2002 RID="a" ID="a"Work partially supported by MIUR and INFN (Italy), and by FAPESP (Brazil). This paper did first appear as e-print physics/0109062 [and as preprint INFN/FM-01/02 (I.N.F.N.; Frascati, 2001)]. RID="b" ID="b"e-mail: recami@mi.infn.it