用TEAOH-C4H9NO复合模板剂合成SAPO-34分子筛的研究Ⅱ.SAPO-34分子筛的表面酸性和催化性能

 以吗啉(C4H9NO)为主要模板剂,以少量四乙基氢氧化铵(TEAOH)为辅助模板剂合成了SAPO -34分子筛,并用氨吸附红外、核磁共振和氮吸附等手段对合成的SAPO-34分子筛进行了表 征. 结果表明,与单独以吗啉为模板剂合成的样品相比,用复合模板剂合成的分子筛样品的比 表面积和孔体积均有所增大; 由于在分子筛骨架中形成了“硅岛”,使其B酸量有所增加 ,对甲醇制低碳烯烃反应的催化性能有所改善.     

Acidic‐pH‐Activatable Fluorescence Probes for Visualizing Exocytosis Dynamics

Live imaging of exocytosis dynamics is crucial for a precise spatiotemporal understanding of secretion phenomena, but current approaches have serious limitations. We designed and synthesized small‐molecular fluorescent probes that were chemically optimized for sensing acidic intravesicular pH values, and established that they can be used to sensitively and reliably visualize vesicular dynamics following stimulation. This straightforward technique for the visualization of exocytosis as well as endocytosis/reacidification processes with high spatiotemporal precision is expected to be a powerful tool for investigating dynamic cellular phenomena involving changes in the pH value.     

Evidence for ion–ion interactions between peptides and anions (HSO4− or ClO4−) derived from high‐acidity acids

The existence of gas‐phase electrostatic ion–ion interactions between protonated sites on peptides ([Glu] Fibrinopeptide B, Angiotensin I and [Asn¹, Val⁵]‐Angiotensin II) and attaching anions (ClO₄^? and HSO₄^?) derived from strong inorganic acids has been confirmed by CID MS/MS. Evidence for ion–ion interactions comes especially from the product ions formed during the first dissociation step, where, in addition to the expected loss of the anion or neutral acid, other product ions are also observed that require covalent bond cleavage (i.e. H₂O loss when several carboxylate groups are present, or NH₃ loss when only one carboxylate group is present). For [[Glu] Fibrinopeptide B + HSO₄]^?, under CID, H₂O water loss was found to require less energy than H₂SO₄ departure. This indicates that the interaction between HSO₄^? and the peptide is stronger than the covalent bond holding the hydroxyl group, and must be an ion–ion interaction. The strength and stability of this type of ion‐pairing interaction are highly dependent on the accessibility of additional mobile charges to the site. Positive mobile charges such as protons from the peptide can be transferred to the attaching anion to possibly form a neutral that may depart from the complex. Alternatively, an ion–ion interaction can be disrupted by a competing proximal additional negatively charged site of the peptide that can potentially form a salt bridge with the positively charged site and thereby facilitate the attaching anion's departure. Copyright © 2014 John Wiley & Sons, Ltd.     

Effect of the structure of nitroxyl radicals on the kinetics of their acid‐catalyzed disproportionation

Acid‐catalyzed disproportionation of cyclic nitroxyl radicals R₂NO^? includes the half‐reactions of their oxidation to oxoammonium cations R₂NO⁺ and reduction to hydroxylamines R₂NOH. For many nitroxyl radicals, this reaction is characterized by its ~100% reversibility. Quantitative characteristics of acid–base and redox properties of the whole redox triad may be obtained from research of kinetics and equilibrium of this reaction. Here, we have examined the kinetics for the disproportionation of twenty piperidine‐, pyrroline‐, pyrrolidine‐, and imidazoline nitroxyl radicals in aqueous H₂SO₄, and interpreted it in terms of the excess acidity function X. The rate‐limiting step of this reaction is R₂NO^? oxidation by its protonated counterpart R₂NOH^+?. Kinetic stability of R₂NO^? in acidic media depends on the basicity of nitroxyl group. This basicity is influenced predominantly by protonation of another, more basic group in radical structure, and its proximity to nitroxyl group. The discovered estimates of pK values for radical cations R₂NOH^+? (from ?5.8 to ?12.0) indicate a very low basicity of nitroxyl groups in all commonly used R₂NO^?. For the first time, a linear correlation is obtained between the one‐electron reduction potentials of oxoammonium cations and the basicity of nitroxyl groups of related radicals. Copyright © 2013 John Wiley & Sons, Ltd.     

Alkylation of benzene with 1-octene over titania pillared montmorillonite

Linear alkylbenzene sulfonic acid, the largest-volume synthetic surfactant, in addition to its excellent performance, is important due to its biodegradable environmental friendliness, as it has a straight chain and is prepared by the sulphonation of linear alkylbenzenes (LAB). To ensure environmental protection, the commercial benzene alkylation catalysts HF or AlCl₃ are replaced and we have developed a clean LAB production process using a pillared clay catalyst capable of not only replacing the conventional homogeneous catalysts, but also having high selectivity for the best biodegradable 2-phenyl LAB isomer. Pillared clay catalysts having high Br?nsted acidity show efficient conversion in gas phase alkylation of benzene with 1-octene with a good 2-phenyl octane selectivity.     

Quantum-Chemical Evaluation of the Protolytic Properties of Thiophenols

The enthalpies and free energies of proton affinity (PA) were calculated by the PM3 method for 27 thiophenoxide anions. For thiophenols, linear correlation has been found between the PAs and the values of pK _a measured by different authors in aqueous acetone, aqueous ethanol, and methanol media. The dependences found permit one to predict a priori the protolytic properties of thiophenols. The differential effects of aqueous ethanol media with different ethanol contents on thiophenol acidity were evaluated based on quantum-chemical data.Original Russian Text Copyright © 2004 by A. N. Pankratov and A. V. Shalabai__________Translated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 5, pp. 800–806, September–October, 2004.     

TG and DSC study of the properties of coked molecular sieve catalyst

A cracking catalyst designatedSRNY was manufactured from a commercialSRNY molecular sieve (M.S.). The support consisted of kaolin, clay and SiO₂. The coking behaviour of theSRNY M.S., the support and the catalyst were examined with light diesel oil (LDO) as feedstock in a microreactor. The physico-chemical properties of both fresh and aged samples, subjected to or not subjected to the cracking reaction ofLDO, were sequentially characterized by means of pore structure determination and thermal analysis. The pore structure included the specific surface area and the pore volume or porosity. Thermal analysis methods used included TG and DSC. The results indicated that all coked samples exhibited obvious changes in surface pore structure and acidity in comparison with non-coked samples. Their specific surface area and acid amount decreased with increase in the coke content of the samples. The apparent activation energy data obtained from decoking samples in an air flow, using the temperature-programmed oxidation (TPO) method, showed that the kinetic parameters of theSRNY M.S. differed from those of theSRNY catalyst and its support.     

Tandem silylformylation-allyl(crotyl)silylation: a new approach to polyketide synthesis

Tandem intramolecular silylformylation-allyl(crotyl)silylation reactions have been developed that allow the highly efficient synthesis of polyketide fragments. The substrates are subjected to Rh(I)-catalyzed silylformylation to afford β-(diallyl)silyl aldehydes which undergo spontaneous uncatalyzed allylsilylation. This unusual spontaneous allylsilylation reaction is driven by strain release Lewis acidity, which arises from the ∼95° O-Si-C bond angle in the oxasilacyclopentane product of the silylformylation reaction. The methodology has been developed both for alkene and alkyne substrates, may be used to establish as many as three stereocenters, and has been shown to be amenable to use in an iterative fashion.     

Response to high acidity and basicity at a platinum electrode in chronopotentiometry

A simple and rapid method is developed to determine the high acidity and the basicity of solutions by chronopotentiometry with a platinum working electrode. The acidity range from 5.0 mol/l H⁺ to 1.0 mol/l OH⁻ can be measured by the adjustment of deposition potential and time. The response mechanism to acidity and basicity has been explored. The transition potential plateau in chronopotentiograms is caused from the oxidation of hydrogen adsorbed on electrode surface.