大孔树脂吸附和分离密蒙花黄色素

本文研究了用大孔树脂吸附和分离密蒙花黄色素，比较了四种树脂对密蒙花黄色素的吸附。选用经x—5作吸附剂，洗脱剂用60％乙醇，产品质量较传统法好，提取率达8％，x－5树脂非常稳定，使用15次后其吸附率仅降低4．95％。     

硫酸根型阴离子交换树脂法改善PAC絮凝性能的研究

体系以聚合氯化铝溶液为原料，以硫酸型强碱性阴离子交换树脂为载体，进行离子交换反应。结果表明，在保持氧化铝含量基本不变的情况下，能有效地提高聚合铝的碱化度。同时生成含ＳＯ４＾２－的聚合氯化铝，实验证明它的絮凝效果优于了聚合氯化铝。     

Triple Component Carbon Epoxy pH Probe

A pH probe based on a carbon‐epoxy electrode design is discussed. The electrode consists of three redox active components within a carbon epoxy matrix. These are the pH sensitive species anthraquinone and phenanthrenequinone, along with the pH insensitive ferrocene reference compound. The values of the peak potentials when combined are shown to shift by 120 mV/pH unit at 25 °C with respect to the ferrocene reference potential.     

螯合树脂研究——Ⅷ.以聚硫醚为主链的氧杂多乙烯多胺型螯合树脂的合成及其吸附性能

由聚[2′-氯乙基-2,3-环硫丙基醚]和多乙烯声胺反应,合成了四种以聚硫醚为主链的氧杂多乙烯多胺型螯合树脂,它们对贵金属离子Au(Ⅲ)、Pd(Ⅱ)、Pt(Ⅳ)、Ag~+等具有优良的吸附性能。     

2-噻吩乙酸在3种树脂上的吸附行为研究

通过静态吸附实验 ,研究了XAD 4、NDA 10 0和ND 90吸附树脂对水溶液中 2 噻吩乙酸的吸附热力学及动力学特性 ,结果表明 ,2 噻吩乙酸在XAD 4树脂上是单层吸附 ,符合Langmuir等温吸附方程 ,吸附过程符合准一级动力学吸附方程 .2 噻吩乙酸在NDA 10 0和ND 90树脂上的吸附也能用Langmuir等温吸附方程表示 ,但并不只是单层吸附而主要是由毛细管凝聚和微孔填充作用造成的 ,吸附过程可分为大孔和中孔区的吸附以及微孔区的吸附两个阶段 ,两个阶段都符合准一级动力学吸附方程     

THE EFFECT OF IONIC STRENGTH ON THE UPTAKE OF TAURINE ON A STRONG-BASIC ANION EXCHANGE RESIN

Studied the effect of ionic strength on the uptake of taurine on a strong-basic anionexchange resin. The batch phase equilibrium experiments of ta urine on the anion exchange resin D290 were conducted at different ionic strength, and then the amounts of uptake of taurine on the resin at different pH were determined. The ion exchange mechanisms of taurine on the anion exchange resin at different pH were discussed. Experimental results showed that with increase of the ionic strength of solution, the adsorbed amount of taurine on the resin D290 decreased; Adding small amounts of NaOH or HCl into the system of taurine aqueous solution/D290 anionresin would make the amount of taurine taken up on the resin to decrease due to the competition uptakes of hydroxyl ion with taurine or the decrease in the amount of absorbable zwitterions of taurine in the solution and excluding the cations of taurine from the anion resin.     

Strong copper(II) species in estuarine and sea waters investigated by a method with high detection window

The distribution of copper(II) in species of different stability in some estuarine and sea water samples (Adriatic Sea) was investigated by a method based on the sorption of the metal ion on a strongly sorbing resin, Chelex 100, whose sorbing properties have been previously characterized. From them, it is possible to predict very high values of detection windows at the considered conditions, for example side reaction coefficient as high as 10¹⁰ at pH 7.5.Strong copper(II) species in equilibrium with Chelex 100 were detected, at concentration 2-20 nM, with a reaction coefficient approximately 10^10.6 at pH 7.45 in sea water, strictly depending on the acidity. They represent 50-70% of the total metal ion and are the strongest copper(II) complexes found in sea water. Weak complexes too were detected in all the samples, with reaction coefficient lower than ca. 10⁹ at the same pH.The method applied, named resin titration (RT), was described in a previous investigation, and is here modified in order to be carried out on oceanographic boat during a cruise in the Adriatic Sea.     

胺固化端环氧基二硅氧烷动力学及性能研究

合成了１，３－二甲基－１，３－二乙基－１，３－双［３－（２，３－环氧丙氧基）丙基］二硅氧烷（ＴＥＤＳ）．对其与二正丁胺的模型反应、与ＤＤＭ（４，４’－二氨基二苯基甲烷）的固化反应劝力学研究表明，反应对ＴＥＤＳ为一级反应．ＴＥＤＳ改性环氧Ｅ—５１体系的动态力学性能、冲击性能和形态结构的研究表明，随改性体系中ＴＥＤＳ含量的增加，体系的玻璃化温度是线性下降、冲击强度增大、冲击试样的断裂面渐渐显现出韧性断裂的特征．     

Influence of fillers and additives on the cure kinetics of an epoxy/anhydride resin

The cure kinetics of a cycloaliphatic epoxy resin with and without additives and cured with an anhydride hardener was investigated by isothermal and nonisothermal differential scanning calorimetry (DSC).Dynamic measurements were used to predict the total heat of reaction of the epoxy resin as well as its activation energy based on the methods of Kissinger and Ozawa. With these methods the inhibition and acceleration effects of additives and fillers on the kinetics have been demonstrated. Additives for advanced processing and property upgrade were added in less than 2 wt.%, whereas fillers on base of SiO₂ were incorporated in more than 50 wt.%. The effect of SiO₂ surface treatment was also objective of this study.To describe the dependence of the conversion on time and temperature, isothermal DSC data were fitted to an autocatalytic model developed by Kamal and extended with a diffusion factor. The results show a very good agreement within the whole conversion range. Also the highly-filled system could be described very well by the phenomenological Kamal model.     

Enhanced metal extractive behavior using dual mechanism bifunctional polymer: an effective metal chelatogen

A new class of chelating polymers using Amberlite XAD-16 (AXAD-16) modified with (N-(3,4-dihydroxy)benzyl)-4-amino,3-hydroxynapthalene-1-sulphonic acid has been developed based on dual mechanism bifunctional polymers, for the extraction of transition and post-transition metal ions. The optimum pH conditions for the quantitative sorption of metal ions were studied. The developed method showed superior extraction qualities with high metal loading capacities of 71, 85, 182, 130 and 46 mg g⁻¹ for Ni(II), Cd(II), Pb(II), Cu(II) and Co(II), respectively. The rate of metal ion uptake i.e. kinetics studies performed under optimum levels showed a time duration of <5 min except for Co(II) which required 20 min, for complete metal ion saturation. Desorption of metal ions were effective with 15 ml of 2 M HCl/HNO₃ prior to detection using flame atomic absorption spectrophotometer. The chelating polymer was highly ion-selective in nature even in the presence of large concentrations of alkali and alkaline earth metal ions, with a high preconcentrating ability for the metal ions of interest. The developed chelating matrix was tested on its utility with synthetic and real samples like river/sea/tap/well water samples and also with multivitamin/mineral tablets, showed R.S.D. values of <2.5% reflecting on the accuracy and reproducibility of data using the newly developed resin matrix.