铬系乙烯齐聚和聚合催化剂

综述了近年来国内外铬系催化剂的最新研究进展。介绍了该类催化剂齐聚和合的性能研究和应用，讨论了该催化剂长期引起争议的活性中心，活性价态，以及反应机理，并同时预测了铬系催化剂在工业和纳米技术方面的发展趋势。     

Group 4 complexes derived from o-carborane: synthesis, structures and ethylene polymerization properties

Nine thermally stable complexes (η⁵-Cp*)[η⁵-(C₅H₄)CMe₂CB₁₀H₁₀CR]MCl₂ (R=H and Me) and (η⁵-Cp*)[η⁵; η¹-(C₅H₄)CMe₂(CB₁₀H₁₀C)]MCl have been prepared via metathesis reactions of Cp*MCl₃ (M=Ti, Zr and Hf, Cp*=pentamethylcyclopentadienyl) with monolithium salts of (C₅H₅)CMe₂(CB₁₀H₁₀CR) (R=H and Me) and with dilithium salt of (C₅H₅)CMe₂(CB₁₀H₁₀CH), respectively. These compounds have been fully characterized by various spectroscopic methods and elemental analyses. All of the compounds except (η⁵-Cp*)[η⁵-(C₅H₄)CMe₂CB₁₀H₁₀CMe]HfCl₂ were additionally characterized by a single crystal X-ray diffraction study, establishing their monomeric bent metallocene structural feature with carborane acting as a substituent or an ancillary ligand. The titanium and zirconium complexes produce high-density polyethylenes with the activity range of about 10³-10⁴ g PE per mol of M bar h in the presence of modified methylaluminoxane cocatalyst.     

STUDY ON HIGHLY ACTIVE ZIEGLERNATTA CATALYSTS FOR POLYMERIZATION OF OLEFINS

In this paper, highly active Ziegler-Natta catalysts of MgCl_2 supported TiCl_4 for synthesis ofpolyolefins, using di-n-butyl phthalate (DNBP) as internal donor and diphenyl dimethoxyl silane(DPDMS) as external donor, have been prepared. The conditions controlling the treatment ofsupport were studied. The interactions of various components present in the catalysts and theirinfluences on catalytic performance were investigated. It is found that by using DNBP and DPDMSas internal and external donors together the polymer products with higher isotactic index can beobtained. Plausible structure model and mechanism were proposed.     

STUDIES ON THE POLYMERIZATION OF ACRYLONITRILE INITIATED BY METAVANADATE-CONTAININ G ANION EXCHANGER-THIOUREA REDOX SYSTEM

The polymerization of acrylonitrile (AN) in aqueous nitric acid initiated by metavanadate-containing anion exchange resin (PV)-thiourea (TU) redox system at 20—40℃. has been investigated. The overall rate of polymerization (R_p) is given byR_p=1.92×10~4e~(-6.860/RT) [AN]~(1.2) [PV]~(0.44) [TU]~(1.0)[HNO_3]~(1.0)The kinetic parameters differed from those of V~(5+)-TU system indicated that the generation of the primary radicals is mainly a difffusion-controlled reaction. The effect of macromolecular field arisen from the polymer matrix exerts a great influence on the polymerization process.     

磺化聚苯乙烯／聚吡咯复合膜

磺化聚苯乙烯（ＳＰＳ）／聚吡咯（ＰＰｙ）复合膜是通过毗咯单体在ＳＰＳ基体中原位聚合方法制成的．用ＦＴＩＲ研究ＳＰＳ／ＰＰｙ复合膜分子间的相互作用，特别是ＳＰＳ中ＳＯ３阴离子在１２００ｃｍ－１不对称伸缩振动港带的分裂，说明了聚吡咯是以阳离子的形式作用于ＳＰＳ中ＳＯ３阴离子上，产生强的离子－离子相互作用．同时还研究了在复合过程中，引起ＳＰＳ基体的微区结构与性能的变化．ＳＰＳ由于吡咯单体的胀入和聚合，导致了ＳＰＳ微相分离，复合膜在动态力学性能测试中出现了两个Ｔｇ转变，分别在１２４和１４５℃．     

Titanium complexes bearing aromatic-substituted β-enaminoketonato ligands: Syntheses, structure and olefin polymerization behavior

A series of titanium complexes [(Ar)NC(CF₃)CHC(R)O]₂TiCl₂ (4b: Ar = -C₆H₄OMe(p), R = Ph; 4c: Ar = -C₆H₄Me(p), R = Ph; 4d: Ar = -C₆H₄Me(o), R = Ph; 4e: Ar = α-Naphthyl, R = Ph; 4f: Ar = -C₆H₅, R = t-Bu; 4g: Ar = -C₆H₄OMe(p); R = t-Bu; 4h: Ar = -C₆H₄Me(p); R = t-Bu; 4i: Ar = -C₆H₄Me(o); R = t-Bu) has been synthesized and characterized. X-ray crystal structures reveal that complexes 4b, 4c and 4h adopt distorted octahedral geometry around the titanium center. With modified methylaluminoxane (MMAO) as a cocatalyst, complexes 4b-c and 4f-i are active catalysts for ethylene polymerization and ethylene/norbornene copolymerization, and produce high molecular weight polyethylenes and ethylene/norbornene alternating copolymers. In addition, the complex 4c/MMAO catalyst system exhibits the characteristics of a quasi-living copolymerization of ethylene and norbornene with narrow molecular weight distribution.     

KINETICS OF SUSPENDED EMULSION POLYMERIZATION OF METHYL METHACRYLATE

The kinetics of suspended emulsion polymerization of methyl methacrylate (MMA), in which water acted as the dispersed phase and the mixture of MMA and cyclohexane as the continuous phase, was investigated. It showed that the initial polymerization rate (Rp0) and steady-state polymerization rate (Rp) were proportional to the mass ratio between water and oil phase, and increased as the polymerization temperature, the potassium persulphate concentration ([I]) and the Tween20 emulsifier concentration ([S]) increased. The relationships between the polymerization rate and [I] and [S] were obtained as follows: Rp0 ∝ [I]0.73[S]0.32 and Rp ∝ [I]0.71[S]0.23. The above exponents were close to those obtained from normal MMA emulsion polymerization. It also showed that the average molecular weight of the resulting poly(methyl methacrylate) decreased as the polymerization temperature, [I] and [S] increased. Thus, MMA suspended emulsion polymerization could be considered as a combination of many miniature emulsion polymerizations proceeding in water drops and obeyed the classical kinetics of MMA emulsion polymerization.     

Fluorenyl-containing sulfonated poly(aryl ether ether ketone ketone)s (SPFEEKK) for fuel cell applications

A series of fluorenyl-containing sulfonated poly(aryl ether ether ketone ketone)s (SPFEEKK) were synthesized via aromatic nucleophilic substitution polymerization. The sulfonation content (SC) was controlled by the feed ratios of sulfonated and nonsulfonated monomers. Flexible and strong membranes in the sulfonic acid form were obtained from cast membranes in the sodium salt forms by treatment with acid. The thermal properties, water uptake, swelling ratio, water state, oxidative stability, proton conductivity and methanol permeability were investigated. All the polymers had proton conductivities greater than 1 × 10⁻² S/cm at room temperature, and the conductivity values of m-SPFEEKK-80 and p-SPFEEKK-80 were up to 1.86 × 10⁻¹ and 1.78 × 10⁻¹ S/cm at 100 °C. This series of polymers also possessed good dimensional stability in water and low methanol crossover.     

Characteristics of Heterophase Graft Copolymerizations

Abstract

Persulfate-initiated graft copolymerizations of glutaraldehyde crosslinked gelatin with acrylic acid, acrylamide, vinyl acetate, and methyl methacrylate in the aqueous phase were investigated. It was observed that percentage grafting, molecular weights of the grafts, and grafting efficiencies were greatly influenced by the nature of the monomers. Hydrophilic monomers gave a higher frequency of grafting but lower molecular weights. While the frequency of grafting with hydrophobic monomers was low, the molecular weights of the grafts were comparatively high. The results are explained in terms of microdomain kinetics, similar to those encountered in emulsion or suspension polymerizations.     

END GROUP TRANSFORMATION OF POLYMERS PREPARED BY ATRP,SUBSTITUTION TO AZIDES

Polystyrenes, polyacrylates and poly(methyl methacrylate) prepared by atom transfer radical polymerization (ATRP) have predictable molecular weights, low polydispersities and well-defined halogen end groups. The halogen end groups have been substituted by other functionalities such as azides and amines. In order to predict the feasibility and selectivity of nucleophilic substitution reactions, the reactivities of the end groups of the different polymers were studied. First, model studies with benzyl halide (BzX), 1-phenylethyl halide (1-PEX), methyl 2-halopropionate (MXP), ethyl 2-bromoisobutyrate (EBiB) and 2-halopropionitrile (2-XPN) were performed. The models compounds were dissolved in DMF and after adding sodium azide (1.1 eq.), the reaction mixtures were stirred at 25°C. The relative magnitude of the rate constants for the reactions with the chlorinated substrates were found to be BzCl > MClP > 1-PECl ≈ 2-ClPN:22 > 6 > 1. Increased substitution at the carbon center decreased the rate of reaction, benzyl chloride reacted 22 times faster than 1-phenylethyl chloride. The brominated substrates reacted very fast. The rate constant of 1-PEBr, determined by competition experiments, was 4.5 times higher than the rate constant of benzyl chloride. Based on these results, the bromine end groups of different polymers were substituted under reaction conditions simular to those used for the model reactions. The end-functionalized polymers were characterized by ¹H-NMR, IR and MALDI-TOFMS.