Degradation of nitrilotriacetic acid (NTA) by oxidation with lead dioxide suspension

Degradation of nitrilotriacetic acid (NTA) by oxidation with lead dioxide suspension has been studied by differential pulse polarography. The NTA was degraded over the pH range from 4 to 9, with formation of glycine or a mixture of iminodiacetic acid and glycine. After shaking with lead dioxide for 1 hr at 30 degrees and pH ~7, the NTA was almost completely decomposed, the molar reacting ratio of Pb(IV) to NTA being ~17:1; down to 1 x 10(-5)M NTA was decomposed in a shaking time as short as 15 min and at a temperature as low as 5 degrees . The iron(III)-NTA complex was also degraded under the same conditions, and the iron released was adsorbed on the lead dioxide.     

Self-organization of polymer particles on hydrophobic solid substrates in aqueous media. II. Self-organization of cationic polymer particles on polymer films and wettability control with particle monolayers

Self-organization of cationic polymer particles through hydrophobic interaction on polymer films in aqueous system and characteristic properties of the resulting particle monolayers were investigated. Cationic polymer particles bearing quaternary ammonium groups on their surfaces effectively self-organized on polymer films. With an increase of the particle surface charge density, the surface coverage and average aggregate size (N _a) decreased. The surface coverage control was accomplished by tuning the ionic strength of the media. The wettability of polymer films for water was imparted by the formation of particle monolayers on them. Annealing of the particle monolayers resulted in the increase of the adhesive strength, while the wettability for water was lost. Further improvements of both wettability and adhesive strength of particle monolayers were achieved by the immobilization of silica colloids on the particle monolayers. This method would be effective for the hydrophilization of polymer films.     

Hydrosilylation of α,β-unsaturated nitriles and esters catalyzed by tris (triphenylphosphine)chlororhodium

The hydrosilylation of α,β-unsaturated nitriles and esters such as acrylonitrile, crotononitrile, cinnamonitrile, ethyl and methyl acrylate, ethyl and methyl crotonate and ethyl and methyl methacrylate using tris(triphenylphosphine)chlororhodium as a catalyst is described. The hydrosilylation of α,β-unsaturated nitriles provided α-adduct exclusively in high yield except in the case of trichlorosilane which afforded β-adduct with acrylonitrile. On the other hand, the hydrosilylation of α,β-unsaturated esters gave rather complex results. The selectivity of the reactions was dramatically affected by the substituent of the ester group and that on the β-carbon. Thus, the hydrosilylation of ethyl acrylate with triethylsilane afforded a β-adduct, but, that of ethyl crotonate using the same hydrosilane gave a 1,4-adduct exclusively. Possible mechanisms for these reactions are discussed.     

Synthesis of fluorine‐containing star‐shaped poly(vinyl ether)s via arm‐linking reactions in living cationic polymerization

Various types of fluorine‐containing star‐shaped poly(vinyl ether)s were successfully synthesized by crosslinking reactions of living polymers based on living cationic polymerization. Star polymers with fluorinated arm chains were prepared by the reaction between a divinyl ether and living poly(vinyl ether)s with fluorine groups (C₄F₉, C₆F₁₃, and C₈F₁₇) at the side chain using cationogen/Et_1.5AlCl_1.5 in a fluorinated solvent (dichloropentafluoropropanes), giving star‐shaped fluorinated polymers in high yields with a relatively narrow molecular weight distribution. The concentration of living polymers for the crosslinking reaction and the molar feed ratio of a bifunctional vinyl ether to living polymers affected the yield and molecular weight of the star polymers. Star polymers with block arms were prepared by a linking reaction of living block copolymers of a fluorinated segment and a nonfluorinated segment. Heteroarm star‐shaped polymers containing two‐ or three‐arm species were synthesized using a mixture of different living polymer species for the reaction with a bifunctional vinyl ether. The obtained polymers underwent temperature‐induced solubility transitions in various organic solvents, and their concentrated solutions underwent sol–gel transitions, based on the solubility transition of a thermoresponsive fluorinated segment. Furthermore, a slight amount of fluorine groups were shown to be effective for physical gelation when those were located at the arm ends of a star polymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Cross‐sectional structural characterization of the surface of exfoliated HOPG using HRTEM‐EELS

We analyzed the surface atomic structure of highly oriented pyrolytic graphite (HOPG) substrate exfoliated with adhesive tape, using high‐resolution transmission electron microscopy and scanning transmission electron microscopy‐electron energy‐loss spectroscopy (STEM‐EELS). The surface step height of the exfoliated HOPG substrate was determined using high‐angle annular dark‐field‐scanning transmission electron microscopy (HAADF‐STEM) images and the depth profiles of the EELS spectra of a cross‐sectioned thin foil specimen prepared via focused ion beam milling. The exfoliated surface of the HOPG substrate presented disordered and curved graphene layers. The STEM‐EELS measurements indicated that upon exfoliation, the surface of the HOPG substrate reacted with atmospheric water and oxygen molecules.     

具有异质结的富勒烯C_(60)/酞菁纳米复合材料的可见光响应光催化应用（英文）

通过再沉淀法制备了富勒烯C60/酞菁的复合纳米微粒。这种复合纳米微粒由于C60分子和酞菁分子间的π-π相互作用而具有电子给体-受体(donor-acceptor)结构,而且这种微粒的尺寸可通过选择再沉淀过程中使用的溶剂来进行控制。此外,这种微粒与Nafion结合后,表现出去除三甲胺的光催化性能,而且其光催化活性优于C60微粒/Nafion或酞菁微粒/Nafion复合物。该结果表明电子给体-受体结构可通过促进有机半导体的电荷分离来增强光催化的性能,从而揭示了一种新颖的基于电子给体-受体结构的有机光催化剂。     

Temperature dependence of methanol and ethanol vapor sorption in polyhedral oligomeric silsesquioxane (POSS) containing methacrylate membranes

This study aimed to determine the solubility and temperature dependence of methanol and ethanol vapor caused by the difference in the substituents of polyhedral oligomeric silsesquioxane (POSS)-containing polymethacrylate membranes and the spacer length between the backbone and POSS backbone. Vapor sorption of methanol and ethanol was measured at 25°C, 35°C, and 45°C for three kinds of POSS-containing polymer membranes, namely, poly(methacryl isobutyl POSS), poly(methacrylate isobutyl POSS), and poly(methacryl phenyl POSS). The primary structures of the three POSS-containing polymer chains were columnar. The solubility of alcohol vapor on the POSS-containing polymer membranes followed the mechanism of solid adsorption and not the general dissolution diffusion. The sorption amount at all three temperatures was related to the surface area of the cylindrical primary structure and the solid adsorption property of the alcohol molecule of the POSS substituent. The sorption amount increased because of the large surface area and adsorption property of alcohol molecules. Although a typical glassy polymer shows exothermic mixing and a rubbery polymer displays endothermic mixing, the sample with the POSS substituent of isobutyl group exhibited an unusual behavior of endothermic mixing despite being a glassy polymer.