Analytical techniques in the study of highly-nitrated nitrocellulose

This work presents an updated overview of the analytical techniques used to study highly-nitrated nitrocellulose, which is used in explosives and is of forensic interest. Most articles published in the past decade were designed:(1) to investigate polymeric parameters of nitrocellulose (e.g., molar mass distribution, viscosity and specific refractive index) by size-exclusion chromatography;(2) to determine the morphological and thermal characteristics of nitrocellulose using thermal and spectroscopic techniques; and,(3) to study the thermal, biological and mechanical degradation of nitrocellulose by thermal, spectroscopic, and mass spectrometric (MS) techniques, alone or coupled to gas chromatography.However, the few papers that focused on the determination of nitrocellulose used in explosives employed analytical techniques [e.g., vibrational techniques (infrared and Raman spectroscopy), MS and ion-mobility spectrometry (IMS) and liquid chromatography (LC) (high-performance LC and ion chromatography)]. Most of the information reported by these techniques has been qualitative. Only quantitative determination of nitrocellulose or its nitrogen content has been performed by measuring the nitrite and/or nitrate ions released from its basic hydrolysis.     

Environmentally friendly homocoupling reaction of functionalized potassium aryl trifluoroborates salts in aqueous media

The homocoupling reaction between potassium aryl trifluoroborates containing different functionalities promoted by a catalytic amount of Pd(OAc)₂ is described. The methodology uses water as a solvent under aerobic conditions to give the corresponding biaryl compounds in good yields.     

An automatic optosensing device for the simultaneous determination of resveratrol and piceid in wines

For the first time, a spectrofluorimetric method is reported for the simultaneous determination of resveratrol (RVT) and piceid (PCD), two stilbenes showing diverse interesting physiological and biochemical attributes, as well as a wide range of health benefits ranging from cardioprotection to chemoprevention. The method makes use of a multicommutated flow-through optosensor in which the resolution of RVT and PCD is accomplished by means the sequential arrival of their photoproducts, on-line generated by UV-irradiation, to the detection area. This is possible due to the different kinetic behaviour of these latter on a solid support (C₁₈ silica gel) filling a minicolumn placed before the detector. The measurement in solid-phase of the photochemically induced fluorescence of the photoproducts (λ_ex: 257 nm/λ_em: 382 nm) is used as analytical signal for monitoring both compounds. The method has been applied to the analysis of RVT and PCD in wines and requires a previous solid-phase extraction (SPE) using Bakerbond C₁₈ cartridges. This pretreatment and the use of a solid-support in both the minicolumn and the flow-cell of the detector allow the determination of RVT and PCD by external calibration. Detection limits (DLs) are 9.3 and 12.6 ng mL^−1 for RVT and PCD, respectively. Commercial red and white wine samples have been analysed and the results obtained have been satisfactorily validated by high-performance liquid chromatography (HPLC).     

New Approach for the Construction of the Coumarin Frame and Application in the Total Synthesis of Natural Products

A new synthetic approach is described for building the coumarin scaffold through the Lewis acid‐promoted cyclization of novel aryl 3‐(dimethylamino)prop‐2‐enoates 2a – 2f . The latter precursors were prepared via aminomethylenation of the corresponding aryl acetates 4a – 4f with the Bredereck reagent. This approach was used for the synthesis of biologically active natural compounds 1a – 1f , through a three‐step procedure starting from the corresponding phenols.     

Super-nucleation in nanocomposites and confinement effects on the crystallizable components within block copolymers, miktoarm star copolymers and nanocomposites

In this paper we reexamine recent results obtained by our group on the crystallization of nanocomposites and linear and miktoarm star copolymers in order to obtain some general features of their crystallization properties. Different nanocomposites have been prepared where a close interaction between the polymer matrix and the nano-filler has been achieved: in situ polymerized high density polyethylene (HDPE) on carbon nanotubes (CNT); and polycaprolactone (PCL) and poly(ethylene oxide) (PEO) covalently bonded to carbon nanotubes. In all these nanocomposites a “super-nucleation” effect was detected where the CNTs perform a more efficient nucleating action than the self-nuclei of the polymer matrix. It is believed that such a super-nucleation effect stems from the fact that the polymer chains are tethered to the surface of the CNT and can easily form nuclei. For polystyrene (PS) and PCL block copolymers, miktoarm star copolymers (with two arms of PS and two arms of PCL) were found to display more compact morphologies for equivalent compositions than linear PS-b-PCL diblock copolymers. As a consequence, the crystallization of the PCL component always experienced much higher confinement in the miktoarm stars case than in the linear diblock copolymer case. The consequences of the topological confinement of the chains in block copolymers and nanocomposites on the crystallization were the same even though the origin of the effect is different in each case. For nanocomposites a competition between super-nucleation and confinement was detected and the behavior was dominated by one or the other depending on the nano-filler content. At low contents the super-nucleation effect dominates. In both cases, the confinement increases as the nano-filler content increases or the second block content increases (in this case a non-crystallizable block such as PS). The consequences of confinement are: a reduction of both crystallization and melting temperatures, a strong reduction of the crystallinity degree, an increase in the supercooling needed for isothermal crystallization, a depression of the overall crystallization rate and a decrease in the Avrami index until values of one or lower are achieved indicating a nucleation control on the overall crystallization kinetics.     

(Liquid + liquid) equilibrium for the ternary systems {heptane + toluene + 1-allyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide} and {heptane + toluene + 1-methyl-3-propylimidazolium bis(trifluoromethylsulfonyl)imide} ionic liquids

The (liquid + liquid) equilibrium (LLE) data for two systems containing heptane, toluene, and 1-methyl-3-propylimidazolium bis(trifluoromethylsulfonyl)imide ([mpim][Tf₂N]) or 1-allyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([amim][Tf₂N]) ionic liquids (ILs) were determined at T = 313.2 K and atmospheric pressure. The effect of a double bond in an alkyl side chain in the imidazolium cation was evaluated in terms of selectivity and extractive capacity. The results show a decrease of the amount of toluene and heptane dissolved in the IL with the allyl group. Thus, the distribution ratios of toluene and heptane of [mpim][Tf₂N] IL are higher than those of [amim][Tf₂N] IL. On the other hand, the separation factor of the [amim][Tf₂N] IL increases comparing to [mpim][Tf₂N] IL. The NRTL model was used to correlate satisfactorily the experimental LLE data for the two studied ternary systems.     

Enthalpies of sublimation of ferrocene and nickelocene measured by calorimetry and the method of Langmuir

A quick and accurate methodology that is based on Langmuir’s equation and that is developed by utilising a DSC7 device is proposed for the measurement of the enthalpies of sublimation of substances characterised by vapour pressures of approximately 1.0 Pa at room temperature. The procedure was applied to ferrocene and nickelocene; the accuracy and uncertainty associated with the experimental results show that the reliability of the developed indirect method is comparable to the direct calorimetric measurements also performed in this work. Furthermore, the melting data and crystal-phase heat capacities for both metallocenes were calorimetrically measured, whereas the gas-phase heat capacity for each metallic bis(cyclopentadienyl) was theoretically estimated by DFT calculations.     

Phase equilibrium data for the ternary system (propane + chloroform + oryzanol)

The compound oryzanol available in the rice bran (oriza sativa) is well known for its antioxidant activity. Phase equilibrium data involving oryzanol in compressed fluids, hardly found in the literature, are important to provide the basis for the extraction and fractionation processes. In this sense, the aim of this work is to report phase equilibrium measurements for the system (γ-oryzanol + chloroform) in compressed propane. Phase equilibrium experiments were performed using the static synthetic method (cloud points transition data) in a high-pressure variable-volume view cell in the temperature range of 303 K to 353 K, pressures up to 17 MPa, for oryzanol overall mass fractions of 2 wt%, 5 wt% and 10 wt% in (propane + chloroform) mixtures. A complex phase behaviour comprising vapour–liquid, liquid–liquid, vapour–liquid–liquid, solid–liquid, solid–liquid–liquid, solid–liquid–liquid–vapour transitions were visually observed for the system studied.     

Structural study and physical properties of a new phosphate KCuFe(PO4)2

Single crystals of a new phosphate KCuFe(PO₄)₂ have been prepared by the flux method and its structural and physical properties have been investigated. This compound crystallizes in the monoclinic system with the space group P2₁/n and its parameters are: a=7.958(3) Å, b=9.931(2) Å, c=9.039(2) Å, β=115.59(3)° and Z=4. Its structure consists of FeO₆ octahedra sharing corners with Cu₂O₈ units of edge-sharing CuO₅ polyhedra to form undulating chains extending infinitely along the b-axis. These chains are connected by the phosphate tetrahedra giving rise to a 3D framework with six-sided tunnels parallel to the [101] direction, where the K⁺ ions are located. The Mössbauer spectroscopy results confirm the exclusive presence of octahedral Fe³⁺ ions. The magnetic measurements show the compound to be antiferromagnetic with C_m=5.71 emu K/mol and θ=−156.5 K. The derived experimental effective moment μ_ex=6.76μ_B is somewhat higher than the theoretical one of μ_th=6.16μ_B, calculated taking only into account the spin contribution for Fe³⁺ and Cu²⁺ cations. Electrical measurements allow us to obtain the activation energy (1.22 eV) and the conductivity measurements suggest that the charge carriers through the structure are the potassium cations.     

The synthesis of piperidine nucleoside analogs—a comparison of several methods to access the introduction of nucleobases

This work deals with the synthesis of piperidine and hydroxypiperidine analogs of nucleosides. Starting from commercially available 3-hydroxypiperidine, proline or 4-hydroxyproline, a series of piperidine derivatives of both purine and pyrimidine nucleobases was prepared. Various methods of nucleobase attachment were evaluated. The prepared compounds were tested for cytostatic, antibacterial, and antiviral properties but no significant activity was found.