吡啶-2-甲醛酰腙镉配合物的合成、晶体结构与荧光性质

合成了3个不同结构的吡啶?2?甲醛缩对氯苯氧乙酰腙(HL)与镉的配合物。通过X射线单晶衍射、红外光谱、紫外光谱、荧光光谱以及热重等分析,对其进行晶体结构和性质的研究。单晶衍射结构解析表明:配合物1属单斜晶系,C2/c空间群,是一个通过氯离子桥联的二聚体,分子式为[Cd(HL)Cl2]2;配合物2属单斜晶系,P21/c空间群,是一个含2个有机配体、蝴蝶状的单核分子,其分子式为[Cd(HL)2Br2];配合物3属三斜晶系,P1空间群,配合物中只含有一个有机配体,其分子式为[Cd(HL)I2]。固体荧光分析表明:配体和配合物均有很强的荧光性,且发绿光。     

硅晶体表面石墨烯褶皱形貌的分子动力学模拟研究

本文利用分子动力学的方法和模拟退火技术从原子尺度分析研究了Si (100), Si (111)和Si (211)表面单原子层石墨烯的褶皱形貌及其演化特点. 研究表明, 分别置于Si晶体的三种不同原子表面的石墨烯都展现出原子尺度的褶皱形貌. 石墨烯与Si晶体表面原子的晶格失配是引起石墨烯褶皱的主要原因. 研究发现, Si晶体表面石墨烯的褶皱形貌强烈的依赖于退火温度. 石墨烯的褶皱形貌还将直接影响其在Si晶体表面的吸附稳定性. 这些研究结果有助于人们认识基于Si晶体衬底的石墨烯的结构形貌及其稳定性, 为石墨烯的进一步应用提供理论参考.     

Fast parallel algorithm for three-dimensional distance-driven model in iterative computed tomography reconstruction

The projection matrix model is used to describe the physical relationship between reconstructed object and projection.Such a model has a strong influence on projection and backprojection,two vital operations in iterative computed tomographic reconstruction.The distance-driven model(DDM) is a state-of-the-art technology that simulates forward and back projections.This model has a low computational complexity and a relatively high spatial resolution;however,it includes only a few methods in a parallel operation with a matched model scheme.This study introduces a fast and parallelizable algorithm to improve the traditional DDM for computing the parallel projection and backprojection operations.Our proposed model has been implemented on a GPU(graphic processing unit) platform and has achieved satisfactory computational efficiency with no approximation.The runtime for the projection and backprojection operations with our model is approximately 4.5 s and 10.5 s per loop,respectively,with an image size of 256×256×256 and 360 projections with a size of 512×512.We compare several general algorithms that have been proposed for maximizing GPU efficiency by using the unmatched projection/backprojection models in a parallel computation.The imaging resolution is not sacrificed and remains accurate during computed tomographic reconstruction.     

多元醇法合成具有不同长径比的棒状LiFePO_4/C材料(英文)

以三价铁盐为铁源,采用多元醇还原法在低温下制备出了具有不同长径比的棒状LiFePO4材料.通过X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)、循环伏安(CV)、交流阻抗谱(EIS)和恒电流充放电测试等手段分析了不同回流反应时间下制备出的前驱体和最终的LiFePO4/C样品.结果表明:回流反应时间对LiFePO4的形貌和特性有明显的影响.通过把回流反应时间从4 h延长至16 h,材料的形貌由不规则的短棒状颗粒变为规则的长棒状颗粒,且棒的直径明显变小.当回流反应时间为10 h时,样品复合了多种形貌,有利于电子的传输,在低倍率下具有优秀的性能,0.1C放电比容量为163 mAh g-1;当回流反应时间为16 h时,样品具有最大的长径比,有利于锂离子的扩散,在高倍率下具有良好的性能,1C、3C、5C、10C、20C倍率下放电比容量分别为135、125、118、110、98 mAh g-1,循环性能良好,几乎无衰减.     

RP-HPLC法测定QOA的含量及有关物质

建立了测定QOA含量及有关物质的RP-HPLC方法。采用Sepax C18(4.6 mm×250 mm,5μm)色谱柱,流动相为乙腈与体积分数0.1%乙酸水溶液(体积比为10:90),流速1.0 m L/min,检测波长241 nm,进样体积为20μL。QOA质量色谱峰与其相邻杂质峰能完全分离,QOA质量浓度在0.5~50μg/m L范围内呈良好的线性关系(A=48387ρ-736.4,γ=0.9999),检出限为10 ng/m L(S/N≥3)。方法 RSD为0.45%,重复性试验RSD为0.37%,稳定性试验RSD为0.21%。     

Adams完备化与局部化的等价性

本文在一般的范畴上考虑了幂等对与Ａｄａｍｓ完备化的关系，证明了它们是等价的     

自旋因式化法推求同科电子组态原子光谱项

以同科电子i3组态光谱项推求为例,提出了用自旋因式化方法推求同科电子光谱项的一般方法.该法较为简单、适用,易于推广,可求出任一基态或激发态原子或离子光谱项.     

问题1748的推广及应用

1 问题的提出 <数学通报>2008年第8期刊出的1748号问题是:若a1,a2,a3,a4∈R+,a1+a2+a3+a4=s.     

Typical Microstructures of Chinese Medicines with X-Ray Microscopy in Phase Contrast

Due to the low absorption contrast of plant tissues, traditional x-ray radiography has not been included in the microscopic techniques used in the identification of traditional Chinese medicines （TCMs）. With the development of x-ray phase contrast imaging （XPCI） in recent years, weakly absorbing materials could also be imaged by x- rays. Here we investigate microstructures of TCMs utilizing XPCI based on a nano-focus x-ray tube. The results demonstrated that XPCI is capable of revealing the microstructures of TCMs used as judging criteria in the identification of TCMs. The major advantages of the new method are nondestructivity, no special demand for sample preparation and suitability for thick samples.