过期妊娠分娩方式的Firsher判别

过期妊娠（＞４２周）患者能否采取正确的分娩方式，关系到胎儿的生命安全。本文用平泉县医院１９９２年１月至１９９３年６月收治的３７例病例求出ｆｉｒｓｈｅｒ线性判别函数，并用此函数对后来收治的５例进行判别，在临床上收到满意效果。     

2-[邻-4,6-二甲氧基嘧啶基-2-氧(硫)代苯基]-1,3,4-噻(噁)二唑类化合物的合成及其除草活性

以取代的邻硝基苯甲醛或水杨醛或邻巯基苯腈为原料,通过几步反应合成得到2-[邻-4,6-二甲氧基嘧啶-2-基-氧(硫)代苯基]-1,3,4-噻(噁)二唑类化合物.初步田间试验证实,30%化合物Ib乳油的使用剂量为2.40～3.60L·hm-2,对试验棉田杂草防除效果达48d,且对棉花较为安全.目标化合物的结构经过1H NMR,MS-ESI,IR以及元素分析等表征.     

2 ,2’,7,7’-四碘-9,9’-螺二芴的简便合成方法

2,2',7,7'-四碘-9,9'-螺二芴具有特殊的螺形结构,它是合成空穴导电材料OMeTAD和TAD及其它一些导电高分子的关键中间体.我们发展了一种条件温和简便的方法,高产率地合成了目标分子.     

扩大人眼波前像差仪测量范围方法的研究

提出了一种扩大人眼波前像差仪测量范围的方法,该法综合了波前重建展开算法和波前探测的模板技术,大幅度扩大了波前测量范围.在待测波前像差超出展开算法测量范围的情况下,此方法仍能对像差正常测量.与模板技术相比,该法大幅扩大了可测的曲率范围.以球面波前入射的实验数据表明,所提出的新方法所能测量的最小曲率半径由模板法的75 mm降低到10 mm,并且由于本方法突破了展开算法的极限,实际上对局部曲率更高的波前仍可测量.     

Influence of Dopant Concentration on Electroluminescent Performance of Organic White-Light-Emitting Device with Double-Emissive-Layered Structure

A novel phosphorescent organic white-light-emitting device （WOLED） with contiguration of ITO/NPB/CBP： TBPe：rubrene/Zn（BTZ）2：Ir（piq）2（acac）/Zn（BTZ）2/Mg：Ag is fabricated successfully, where the phosphorescent dye bis （1-（phenyl）isoquinoline） iridium （Ⅲ） acetylanetonate （Ir（piq）2 （acac）） doped into bis-（2-（2-hydroxyphenyl） benzothiazole）zinc （Zn（BTZ）2） （greenish-blue emitting material with electron transport character） as the red emitting layer, and fluorescent dye 2,5,8,11-tetra-tertbutylperylene （TBPe） and 5,6,11,12-tetraphenyl-naphthacene （rubrene） together doped into 4,4＇-N,N＇-dicarbazole-biphenyl （CBP） （ambipolar conductivity material） as the blue-orange emitting layer, respectively. The two emitting layers are sandwiched between the hole-transport layer N ,N＇-biphenyl-N , N＇-bis （1-naph thyl）-（1,1＇-biphenyl）-4, 4 Cdiamine （NP B） and electron-transport layer （Zn（BTZ）2 ） The optimum device turns on at the driving voltage of 4.5 V. A maximum external quantum efficiency of 1.53%. and brightness 15000 cd/m^2 are presented. The best point of the Commission Internationale de 1＇Eclairage （CIE） coordinates locates at （0.335, 0.338） at about 13 V. Moreover, we also discuss how to achieve the bright pure white light through optimizing the doping concentration of each dye from the viewpoint of energy transfer process.     

Simultaneous identification of unknown time delays and model parameters in uncertain dynamical systems with linear or nonlinear parameterization by autosynchronization

In this paper, we propose a general method to simultaneously identify both unknown time delays and unknown model parameters in delayed dynamical systems based on the autosynchronization technique. The design procedure is presented in detail by constructing a specific Lyapunov function and linearizing the model function with nonlinear parameterization. The obtained result can be directly extended to the identification problem of linearly parameterized dynamical systems. Two Wpical numerical examples confirming the effectiveness of the identification method are given.     

Highly efficient blue fluorescent OLEDs with doped double emitting layers based on p—n heterojunctions

We fabricate a kind of novel efficient blue fluorescent organic light emitting device(OLED) based on p-n heterojunctions composed of hole transporting layer(HTL) N,N ’-bis(naphthalen-1-yl)-N,N ’-bis(phenyl)-benzidine(NPB) and electron transporting layer(ETL) 4,7-diphnenyl-1,10-phenanthroline(BPhen),into which a new blue material,DNCA(a derivation of N 6,N 6,N 12,N 12-tetrap-tolylchrysene-6,12-diamine),is partially doped simultaneously,and double emitting layers are configured.With a turn-on voltage of 2.6 V at 1 cd/m 2,this type of OLED presents a maximum luminance efficiency(η max) of 8.83 cd/A at 5.818 mA/cm 2 and a maximum luminance of over 40000 cd/m 2.Meanwhile,the Commission Internationale De L’Eclairage(CIE) coordinates of this device change slightly from(0.13,0.27) to(0.13,0.23) as the driving voltage increases from 3 V to 11 V.This improvement in the electroluminescent characteristics is attributed mainly to the ideal p-n heterojunction which can confine and distribute excitons evenly on two sides of the heterojunction interface so as to improve the carrier combination rate and expand the light-emitting region.     

门限自回归模型参数的局部正交设计寻优法

在采用点值图确定门限区间个数的基础上,对门限自回归模型中门限值、滞后步长、各门限区间模型阶数,利用正交设计方法寻优,计算工作量锐减,却可得到精度较高的预报模型.     

ent-贝壳杉烷型二萜化合物的细胞毒活性研究进展

详细地概述了各类天然与合成的ent-贝壳杉烷二萜化合物的细胞毒活性研究进展, 总结和讨论了这类化合物的构效关系、作用机制以及对多种人癌细胞系的选择性, 评述了这类化合物作为抗肿瘤药物的开发潜力, 提出了目前存在的问题与不足, 并对其发展前景和研究方向做出了预测和展望.     

不同主体双发光层白色有机电致发光器件的性能研究

制备了结构为ITO/NPB/CBP:TBPe:rubrene/BAlq:Ir(piq)₂(acac)/BAlq/Alq₃/Mg:Ag的白色磷光有机电致发光器件.利用两种不同的主体材料,即用双载流子传输型主体材料CBP掺杂荧光染料TBPe及rubrene作为蓝光和橙黄光发光层;用电子传输型主体材料BAlq掺杂磷光染料Ir(piq)₂(acac)作为红色发光层.以上双发光层夹于空穴传输层NPB与具有电子传输性的阻挡层BALq之间.讨论了如何控制