有机激基复合物电致发光器件

报导了有机电致发光（ＯＥＬ）器件中激基复合物（ｅｘｃｉｐｌｅｘ）的发光现象．利用简单的结构，获得了ｅｘｃｉｐｌｅｘ型的白色电致发光．结果表明ｅｘｃｉｐｌｅｘ的形成为ＯＥＬ器件获得多色发射提供了一种新途径．     

Vortex chains induced by anisotropic spin-orbit coupling and magnetic field in spin-2 Bose-Einstein condensates

We investigate the anisotropic spin-orbit coupled spin-2 Bose-Einstein condensates with Ioffe-Pritchard magnetic field. With nonzero magnetic field, anisotropic spin-orbit coupling will introduce several vortices and further generate a vortex chain. Inside the vortex chain, the vortices connect to each other, forming a line along the axis. The physical nature of the vortex chain can be explained by the particle current and the momentum distribution. The vortex number inside the vortex chain can be influenced via varying the magnetic field. Through adjusting the anisotropy of the spin-orbit coupling, the direction of the vortex chain is changed, and the vortex lattice can be triggered. Moreover, accompanied by the variation of the atomic interactions, the density and the momentum distribution of the vortex chain are affected. The realization and the detection of the vortex chain are compatible with current experimental techniques.     

Efficiency of a blue organic light-emitting diode enhanced by inserting charge control layers into the emission region

We demonstrate high current efficiency of a blue fluorescent organic light-emitting diode (OLED) by using the charge control layers (CCLs) based on Alq3 . The CCLs that are inserted into the emitting layers (EMLs) could impede the hole injection and facilitate the electron transport, which can improve the carrier balance and further expand the exciton generation region. The maximal current efficiency of the optimal device is 5.89 cd/A at 1.81 mA/cm2 , which is about 2.19 times higher than that of the control device (CD) without the CCL, and the maximal luminance is 19.660 cd/m2 at 12V. The device shows a good color stability though the green light emitting material Alq3 is introduced as the CCL in the EML, but it has a poor lifetime due to the formation of cationic Alq3 species.     

利用Cs基衍生物作为n型掺杂剂改善蓝色有机发光二极管的效率

利用两种Cs基衍生物碳酸铯(Cs2CO3)和醋酸铯(CH3COOCs)作为n型掺杂剂掺入到一种新型的电子传输材料2,9-二(2-萘基)-4,7-二苯基-1,10-菲啰啉(NBPhen)中来提高有机发光二极管(OLEDs)的效率.实验结果表明:器件的驱动电压明显降低,并且优化后得到的Cs基n型掺杂器件(ITO/β-NPB/CBP:5%(w)N-BDAVBi/NBPhen/NBPhen:Cs2CO3(or CH3COOCs)/Al)呈现出较好的电致发光性能,在14 V时电流密度分别为551.80和527.88 mA·cm-2,对应的亮度分别达到39750和39820 cd·m-2,电流效率在亮度为10000 cd·m-2时分别为14.60 cd·A-1(Cs2CO3掺杂)和14.40 cd·A-1(CH3COOCs掺杂),这些参数明显优于传统器件的发光性能(ITO/β-NPB/CBP:5%(w)N-BDAVBi/NBPhen/Cs2CO3/Al,其在14 V时电流密度为312.39 mA·cm-2,对应的亮度为25190 cd·m-2;电流效率在亮度为10000 cd·m-2时为9.45 cd·A-1.此外,基于有机半导体掺杂原理和器件的能级结构对n型掺杂器件效率提高的原因进行了分析.     

不同主体双发光层白色有机电致发光器件的性能研究

制备了结构为ITO/NPB/CBP:TBPe:rubrene/BAlq:Ir(piq)₂(acac)/BAlq/Alq₃/Mg:Ag的白色磷光有机电致发光器件.利用两种不同的主体材料,即用双载流子传输型主体材料CBP掺杂荧光染料TBPe及rubrene作为蓝光和橙黄光发光层;用电子传输型主体材料BAlq掺杂磷光染料Ir(piq)₂(acac)作为红色发光层.以上双发光层夹于空穴传输层NPB与具有电子传输性的阻挡层BALq之间.讨论了如何控制 关键词： 有机电致发光 磷光染料 掺杂 白光     

利用BCP层调节白色磷光有机电致发光器件色度的研究

制备了三种结构的白色有机电致发光器件，通过比较得出：在发光层中间插入2，9-二甲基-4，7-二苯基-1，10-菲咯啉(BCP)能有效控制载流子在不同发光层的分布，进而对器件色度进行调节；而掺杂磷光染料Ir(ppy)₃作敏化剂能有效提高器件的效率. 结构为:氧化铟锡/聚乙烯基咔唑∶N，N′-二(1-萘基)-N，N′-二苯基-1，1′-联苯-4-4′-二胺(30nm)/二-(2-甲基-8-羟基喹啉)-4-联苯酚铝：3.0 wt%2，5，8，11-tetra-tertbutylperylene(TBPe)(30nm)/BCP(5.0nm)/4,4N,N二咔唑基二苯：5.0 wt%Ir(ppy)₃:2.0 wt%红荧烯(15nm)/BCP(10nm)/Mg:Ag的器件色度和效率俱佳. 其在17V工作电压下具有的亮度为4670cd/m²，对应色坐标为(0.31,0.37). 器件具有的最大外量子效率为1.4%，当驱动电压从5.0V升高到17V，器件色坐标严格位于白光色域区内. 关键词： 磷光染料 阻挡层 白光 双发光层     

White organic light-emitting device with\ both phosphorescent and fluorescent emissive layers

This paper reports the fabrication of novel white organic light-emitting device（WOLED） by using a high efficiency blue fluorescent dye N-（4-（（E）-2-（6-（（E）-4-（diphenylamino）styryl）naphthalen-2-yl）vinyl）phenyl）oN- phenylbenzenamine （N-BDAVBi） and a red phosphoresecent dye bis （1-（phenyl） isoquinoline） iridium （III） acetylanetonate （Ir（piq）2（acac））. The configuration of the device was ITO/PVK：TPD/CBP： N-BDAVBi /CBP/ BALq： Ir（piq）2（acac）/BCP/Alq3/LiF：AL. By adjusting the proportion of the dopants （N-BDAVBi, Ir（piq）2（acac）） in the light-emitting layer, white light with Commission Internationale de l＇Eclairage （CIE） coordinates of （0.35, 0.35） and a maximum luminance of 25350cd/m2 were obtained external quantum and current efficiency of 6.78% and between the two light-emitting layers and using BCP at an applied voltage of 22V. The WOLED exhibits maximum 12cd/A respectively. By placing an undoped spacer CBP layer as hole blocking layer, the colour stabilization slightly changed when the driving voltage increased from 6 to 22 V.     

SYNTHESIS OF POLY(2,5-DIPHENYL-1,3,4-THIADIAZOLYL)-4,4''-VINYLENE AND ITS ELECTROLUMINESCENT PERFORMANCE*

The synthesis, characterization and electroluminescence performance of a new type of conjugatedpolymer, poly(2,5-diphenyl-1,3,4-thiadiazolyl)-4,4'-vinylene (TPPV) are presented. A light-emitting diodeconsisted of ITO/TPPV/Al is driven at about 4.0 V and has a peak emission wavelength of 485 nm. Thisblue-shift of the peak is due to the decrease of conjugate degree of TPPV compared to PPV. This result is inaccord with that determined by XPS and theoretical model of MNDO/3     

利用吡啶添加剂提高钙钛矿太阳能电池的光伏性能

研究了吡啶作为添加剂对一步法制备甲胺铅碘钙钛矿太阳能电池光电性能的影响.利用SEM、AFM、XRD、UV-Vis、PL等手段研究了不同吡啶掺杂浓度对制备的CH3 NH3 PbI3薄膜的表面形貌、结晶度和光学性能的影响.研究结果表明:少量的吡啶掺杂可以提高钙钛矿薄膜的覆盖率及降低薄膜的表面粗糙度.当在CH3 NH3 PbI3前驱体溶液中添加体积分数为1%的吡啶时,制备的钙钛矿太阳能电池的能量转换效率达到7.33%,而未加吡啶的对比器件效率仅为1.01%.进一步添加吡啶会导致钙钛矿材料的降解.     

同时掺杂磷光和荧光染料的白色有机电致发光器件性能研究

以磷光染料Ir(piq)₂(acac)作为发光掺杂剂,掺入空穴传输性主体材料NPB中得到红色发光层,荧光材料TBP掺入到主体CBP中作为蓝色发光层,制备了结构为ITO/NPB/NPB：Ir(piq)₂(acac)/CBP/CBP：TBPe/BCP/ALq/Mg：Ag的双发光层白色有机电致发光器件.其中ALq₃、未掺杂的NPB和CBP及BCP层分别作为电子传输层、空穴传输层和激子阻挡层.实验中通过调节发光层厚度及Ir(piq)_{2关键词： 磷光 激子阻挡层 有机电致发光}