超音速气流中受热壁板的稳定性分析

采用Galerkin方法建立二维壁板的非线性气动弹性运动方程，用一阶活塞理论模拟壁板 受到的气动力. 基于李雅普诺夫间接法分析了平壁板的稳定性，得到了壁板失稳的边界 曲线；采用牛顿迭代法分析了壁板的屈曲变形，进而分析了后屈曲状态下壁板的稳定性； 在时域中分析了后屈曲状态下壁板的颤振边界. 分析结果表明，为了保证计算精度， 在二维壁板的静态失稳及过屈曲变形分析中，至少要取二阶谐波模态；在平壁板的超音速颤 振(动态失稳)边界分析中至少应取四阶模态. 还对壁板的温升，壁板长厚比、壁板密 度和气流马赫数作了无量纲变参分析，研究了这些参数的变化对壁板稳定性的影响规律. 研 究中发现，当气流速压较低时壁板一般会稳定在低阶谐波模态的屈曲变形位置，但是如果系 统出现多个渐近稳定的不动点，即使作用在壁板上的气流速压很低，壁板也有可能在较低速 压下发生二次失稳型颤振.     

超声速平板圆台突起物绕流实验和数值模拟研究

高速飞行器表面不可避免的存在突起物并形成复杂流场, 从而引起飞行器气动特性和热载荷的变化; 同时, 突起物是流动控制的重要方法之一, 合适的突起物形状及安装位置对于改善冲压发动机进气道性能有重要意义. 本文采用基于纳米粒子的平面激光散射技术(NPLS)研究了马赫3.0来流边界层为层流的平板上三个不同高度圆台突起物绕流流场, 主要关注了突起物后方的尾迹边界层, 并采用高精度的显式五阶精度加权紧致非线性格式(WCNS-E-5)离散求解Navier-Stokes方程模拟了该流场. 获得了超声速圆台绕流精细流场结构, 观察到突起物后方尾迹区域边界层发展的过程. 结合实验和数值模拟结果可以发现, 当圆台高度接近或者小于当地边界层厚度时, 突起物对边界层的扰动非常弱, 圆台后方尾迹边界层能够维持较长距离的层流状态, 在边界层转捩阶段也有清晰的发卡涡结构出现; 反之, 边界层受到的扰动明显增大, 在突起物后方很快发展为湍流; 风洞噪声对本文研究圆台引起的边界层扰动有一定影响, 实验获得的边界层转捩位置要比数值结果靠前. 基于NPLS流场图像, 采用间歇性方法分析了圆台突起物后方边界层的特性, 对于高度大于边界层厚度的圆台其间歇性曲线较为接近并且更加饱满, 边界层的脉动也更为强烈.     

水下超声速细长锥型射弹超空泡形态的计算方法

采用理想可压缩流体无旋定常流动以及超空泡尾部Riabushinsky闭合方式假定,基于细长体理论和匹配渐近展开法,建立了描述水下超声速条件下细长锥型射弹超空泡流动的积分微分方程.求解得到了考虑压缩性影响的超空泡形态二阶近似解,改进了超空泡形态的计算精度.分析了超声速射弹高速冲击条件下流体压缩性对超空泡形态的影响.流体压...     

使用叠栅层析技术测量超音速风洞中的非对称复杂密度场

使用叠栅层析技术解决超音速风洞中复杂密度场的测量难题。应用高灵敏度叠栅偏折仪和间隔角度旋转模型的方法获取超音速风洞中流场的多方向叠栅条纹图。层析计算中使用一种新的偏折角修正迭代的叠栅层析算法,该方法可以实现对有限角采样和包含遮挡物的非完全数据重建,迭代过程中结合内边界平滑滤波提高重建精度。实验中获取了马赫数为2.52的超音速风洞中9幅不同采样角的条纹图,经过50次迭代计算后重建出膨胀波区非对称密度场的截面分布,并对测量结果和误差进行了分析和讨论。使用计算流体力学技术对该密度场进行建模和计算,验证了叠栅层析重建结果的正确性,证实了该技术在测量复杂流场领域的重要价值。     

Supersonic flow past a concave double wedge

The supersonic flow past a concave double wedge is discussed. Because of the interaction between the outer shock attached at the head of the wedge and the inner shock issued from the concave corner, there is a rarefaction wave issued from the intersection of the outer and inner shock. The rarefaction wave is reflected by the outer shock and the wedge infinitely, while the outer shock is also bent due to interaction. The global existence of the solution is proved under the assumptions that the outer shock is weak and the difference of two slopes of the double wedge is small. Meanwhile, a rigorous proof of the asymptotic behavior of the global solution is given. The property is often ap plied to numerical computation. Project partially supported by the National Natural Science Foundation of China and Doctoral Programme Foundation of IHEC.     

光学零件超声波清洗的应用现状及其发展

本文在概述超声波清洗机理之后，着重介绍了光学零件超声波清洗的应用现状及光学零件超声波清洗用的清洗剂、脱水剂、干化剂等清洗辅料的几个进展阶段，以及当前清洗辅料的研究动态及面临课题。     

THE UNIQUENESS OF A TRANSONIC SHOCK IN A NOZZLE FOR THE 2-D COMPLETE EULER SYSTEM WITH THE VARIABLE END PRESSURE

In this paper, by use of the methods in [1-3], we establish the uniqueness of a 2-D transonic shock solution in a nozzle when the end pressure in the diverging part of the nozzle lies in an appropriate scope. Especially, we remove the crucial but unnatural assumption in recent references which the transonic shock must be assumed to go through a fixed point in advance.     

Unsteady supersonic flow over an oscillatory aerofoil using a second-order TVD scheme

The unsteady flow over an oscillatory NACA0012 aerofoil has been simulated by the calculation with Euler equations. The equations are discretized by an implicit Euler in time, and a second-order space-accurate TVD scheme based on flux vector splitting with van Leer's limiter. Modified eigenvalues are proposed to overcome the slope discontinuities of split eigenvalues at Mach = 0·0 and ± 1·0, and to generate a bow shock in front of the aerofoil. A moving grid system around the aerofoil is generated by Sorenson's boundary fitted co-ordinates for each time step. The calculations have been done for two angles of attack θ = 5·0° sin (ωt) and θ = 3·0° + 3·0° sin (ωt) for the free-stream Mach numbers 2·0 and 3·0. The results show that pressure and Mach cells flow along characteristic lines. To examine unsteady effects, the responses of wall pressure and normal force coefficients are analysed by a Fourier series expansion.     

Experimental investigation of supersonic radiation propagation in low-density plastic and copper-doped foams

1 Introduction The investigation of supersonic radiation wave transporting in low density foam pro-duced by thermal radiation is of crucial importance in inertial confinement fusion (ICF) research[1]. When the intense radiation flux is incident in the media, first, a supersonic heat wave is formed which propagates into the undisturbed material. In time, due to the increasing mass of heated material, it slows down and is overtaken by a shock wave,thus becoming of the ablative type. Normally, …