确定岩质边坡安全阈值的新方法

应用二维离散单元程序UDEC,以黄麦岭磷矿采场岩质边坡为例,通过分析边坡质点位移矢量的变化规律,定义了边坡的极限平衡状态和破坏状态,提出一种新的确定安全速度阈值的方法,并确定了黄麦岭磷矿采场岩质边坡的安全速度阈值。分析结果表明,新方法确定的安全阈值与现场监测确定的阈值吻合得较好。因此,应用该法来确定边坡的安全阈值是可行的。     

Design of solids for antigravity motion illusion

This paper presents a method for designing solid shapes containing slopes where orientation appears opposite to the actual orientation when observed from a unique vantage viewpoint. The resulting solids generate a new type of visual illusion, which we call “impossible motion”, in which balls placed on the slopes appear to roll uphill thereby defying the law of gravity. This is possible because a single retinal image lacks depth information and human visual perception tries to interpret images as the most familiar shape even though there are infinitely many possible interpretations. We specify the set of all possible solids represented by a single picture as the solution set of a system of equations and inequalities, and then relax the constraints in such a way that the antigravity slopes can be reconstructed. We present this design procedure with examples.     

Laser Light and X-Ray Diffraction Studies of Oriented Isotactic Polypropylene (iPP) Prepared by Temperature Slope Crystallization

Isotactic polypropylene (iPP) film was melt-crystallized in a temperature gradient. The iPP film showed well oriented α- and β-crystalline textures along the gradient. The crystalline structure, phase transition boundary and lamellar twisting were examined by X-ray diffraction and laser light diffraction (LLD). On the α-β boundary, LLD shows a sharp streak perpendicular to the boundary, where the a-axis of the β-crystal is oriented perpendicular to the temperature gradient. Apart from the boundary, the a-axis of the β-crystal becomes parallel to the gradient. The β-crystal shows lamellar twisting with a pitch of 200 μm at room temperature. When heated the β-crystal, the lamellar distance of 295Å at room temperature decreases to 285Å at 80–100°C and then increases to more than 300Å above 120°C. During the heating, the value of the twist period increases from 200 to 210 μm at 90–100°C, and then to above 224 μm at 140°C. The increase of the twist period is related to the increasing crystalline thickness of the β-lamellae.     

内孤立波沿缓坡地形传播特性的实验研究

以南中国海东北部海域底部缓坡地形为背景, 在大型重力式分层流水槽中模拟了下凹型内孤立波沿缓坡地形传播过程中的浅化、破碎、分裂等现象, 利用分层染色标识方法和多点组合探头阵列技术对内孤立波沿缓坡地形演化特征进行了定性分析和定量测量. 实验表明: 浅化效应使内孤立波传播速度减小, 对大振幅内孤立波具有抑制作用, 对小振幅波具有放大效应; 浅化效应可导致内孤立波的剪切失稳及破碎, 还可导致大振幅内孤立波的分裂. 利用Miles稳定性理论可定性描述内孤立波沿缓坡地形传播时发生不稳定状态的位置, 实验结果与理论分析相符合. 关键词： 分层流 缓坡地形 内孤立波 不稳定性     

后腔镜对掺Yb3+双包层光纤激光器性能影响的研究

采用自行研制的内包层为矩形的掺Yb^3 双包层石英光纤，以透射率不同的一组二向色镜为后腔镜构成了双包层光纤激光器。实验证明：后腔镜具有较高透射率为佳；后腔镜可以实现对激光波长的控制；激光斜率效率与后腔镜透射率之间的关系符合指数变化规律，在本实验的条件下，斜率效率的最大值约60％。     

旋转锥镜散斑剪切术测量动态扭率和斜率

采用旋转锥镜技术，进行激光散斑剪切照相，测量变形物体的动态扭率和斜率，拍摄一幅散斑图可获得扭率和斜率动态变化的全过程。     

Measurement of Slopes of a Deformed Object Corresponding to Different Directions with Digital Holography

A digital holographic method that can be used for the simultaneous measurement of slopes of a deformed object in different directions is described in this paper. In this method, two holograms are recorded numerically under the normal and deformed states of the specimen, and two object waves are numerically calculated from these two holograms. The slopes corresponding to different directions are measured by superposing the two object waves with appropriate shifts. It is a superior method in regard to the simple experiment setup, the flexibility in handing the data, and the high quality phase maps.     

高阶PMD统计特性研究

讨论了三阶偏振模色散(PMD)的统计特性及其对于高阶PMD补偿系统的影响.数值模拟结果表明,随着即时差分群时延(DGD)的增加,二阶PMD单位矢量旋转速率的统计覆盖范围的变化趋势与主偏振态(PSP)旋转斜率的相应变化正好相反.此外,随着即时DGD的增加,二阶PMD模值的统计覆盖范围不断增加,使得高速光通信系统中高阶PMD补偿的实现将更加困难.     

The study of chromatic dispersion and chromatic dispersion slope of WI- and WII-type triple-clad single-mode fibers

In this paper, the chromatic dispersion and chromatic dispersion slope of two kinds of triple-clad single-mode fibers with a depressed index inner cladding named WI- and WII-type were examined. A feasible approach to calculate chromatic dispersion and higher-order dispersion was established successfully, and the influences made by the optical parameters and geometric parameters on the chromatic dispersion coefficient and its slope were analyzed in detail. The calculated results show that the optical parameter R₂, which symbolizes the third cladding effect, has a strong impact on the chromatic dispersion coefficient and the chromatic dispersion slope, and the degrees of such impact are closely related to the other parameters.     

Measurement of Slopes of a Deformed Object Corresponding to Different Directions with Digital Holography

1　Ｉｎｔｒｏｄｕｃｔｉｏｎ　　Ｓｔｒｅｓｓａｎａｌｙｓｔｓａｒｅｏｆｔｅｎｉｎｔｅｒｅｓｔｅｄｉｎｔｈｅｄｅｒｉｖａｔｉｖｅｓｏｆｔｈｅｄｉｓｐｌａｃｅｍｅｎｔｒａｔｈｅｒｔｈａｎｔｈｅｄｉｓｐｌａｃｅｍｅｎｔｉｔｓｅｌｆ ,ｂｅｃａｕｓｅｓｔｒａｉｎｓａｎｄｈｅｎｃｅｓｔｒｅｓｓｅｓａｒｅｆｉｒｓｔ ｏｒｄｅｒｄｅｒｉｖａｔｉｖｅｓｏｆｄｉｓｐｌａｃｅｍｅｎｔ.Ｔｈｅｄｅｒｉｖａｔｉｖｅｓｃａｎｂｅｏｂｔａｉｎｅｄｎｕｍｅｒｉｃａｌｌｙｆｒｏｍｔｈｅｄｉｓｐｌａｃｅｍｅｎｔｄａｔａｂｕｔｔｈｅｐ…