组合式十字形钢管混凝土柱偏压力学性能试验研究

设计了一种由槽钢和方形钢管拼焊形成的组合式十字形钢管混凝土柱,将其灵活地布置在框架结构的中节点,可使柱肢与填充墙等厚,有效地提高建筑使用面积。共制作了6根组合式十字形钢管混凝土柱试件,考虑了偏心距和长细比两种变化参数。通过对其进行偏心受压试验研究,考察了试件的破坏形态和荷载-挠度曲线,并分析了其在不同偏心距和长细比下的荷载-应变曲线发展规律。结果表明:组合式十字形钢管混凝土柱中钢管和槽钢对混凝土的约束作用强,表现为较高的延性系数;偏心距或长细比越大,试件的极限承载力及弹性刚度越小,且偏心距越大延性越好,长细比对延性影响不显著;在受拉侧纵向应变基本上符合平截面假定,在受压侧纵向应变不符合平截面假定。     

Sol-Gel processing of silica nanoparticles and their applications

Recently, silica nanoparticles (SNPs) have drawn widespread attention due to their applications in many emerging areas because of their tailorable morphology. During the last decade, remarkable efforts have been made on the investigations for novel processing methodologies to prepare SNPs, resulting in better control of the size, shape, porosity and significant improvements in the physio-chemical properties. A number of techniques available for preparing SNPs namely, flame spray pyrolysis, chemical vapour deposition, micro-emulsion, ball milling, sol-gel etc. have resulted, a number of publications. Among these, preparation by sol-gel has been the focus of research as the synthesis is straightforward, scalable and controllable. Therefore, this review focuses on the recent progress in the field of synthesis of SNPs exhibiting ordered mesoporous structure, their distribution pattern, morphological attributes and applications. The mesoporous silica nanoparticles (MSNPs) with good dispersion, varying morphology, narrow size distribution and homogeneous porous structure have been successfully prepared using organic and inorganic templates. The soft template assisted synthesis using surfactants for obtaining desirable shapes, pores, morphology and mechanisms proposed has been reviewed. Apart from single template, double and mixed surfactants, electrolytes, polymers etc. as templates have also been intensively discussed. The influence of reaction conditions such as temperature, pH, concentration of reagents, drying techniques, solvents, precursor, aging time etc. have also been deliberated. These MSNPs are suitable for a variety of applications viz., in the drug delivery systems, high performance liquid chromatography (HPLC), biosensors, cosmetics as well as construction materials. The applications of these SNPs have also been briefly summarized.     

Diseño automático de tableros óptimos de puentes de carretera de vigas artesa prefabricadas mediante algoritmos meméticos híbridos

This paper deals with the minimum cost automatic design of precast bridge decks made of U-beams and an upper slab. It uses a hybrid memetic algorithm that combines the population search of solutions by genetic algorithms and a search by variable neighborhood. This algorithm is applied to a bridge made of two isostatic U-beams of 20-40 m of span and a width of 12 m. This example has 40 discrete variables. The evaluation module takes into account the service and ultimate limit states usually considered for these structures, i.e. flexure, shear, torsion, cracking, deflections, etc. The use of the memetic algorithm requires its previous calibration. Each of the heuristics is run 12 times, obtaining information about the minimum and average values, as well as the scatter. The parametric study showed a good correlation for the cost, the number of strands and the steel and concrete quantities with the span length. Savings have been found between 8 and 50% compared to other structures really executed. The presented procedure allows the practical application to the real design and its adaptation to the precast process.     

Análise da confiabilidade de estruturas de concreto armado com uma metodologia para inclusão de efeitos estocásticos de propriedades dos materiais

In this paper, special emphasis is given to the inclusion of uncertainties in the evaluation of structural behaviour aiming at a better representation of the system characteristics and the quantification of the importance of these uncertainties in the project. It deals with the structural reliability analysis problem accounting the effect of spatial variability of material properties. To this end it is proposed a finite element model to represent the behaviour of reinforced concrete for short and long-term loads, which includes the main features observed in this material. It was developed a model for the generation of multidimensional non-Gaussian stochastic fields for the material properties that is independent of the finite element mesh. First, an example of a two-dimensional non-Gaussian stochastic field generation in a square steel plate is presented. Latter, the reliability analysis is performed to a limit state function based on prescribed values of mid-span displacements on a simply-supported reinforced beam. Finally, the influence of long-term effects on the reliability of a reinforced concrete beam is studied considering the effect of steel reinforcement corrosion.     

混凝土搅拌车搅拌筒磨损数值分析

混凝土运输过程中搅拌筒的磨损一直是一种常见潜在危害,磨损严重时会导致叶片失效,对搅拌的质量和出料匀质性产生影响。通过实验获取搅拌筒内部的磨损费时费力,因此有必要采取一种数值分析方法对搅拌筒的磨损进行预测并提出改进。本文采用摩擦磨损实验的方法来标定颗粒与搅拌筒之间的Archard磨损常数,采用JKR接触模型表征混凝土的流动性能,采用离散元方法(DEM)对搅拌筒筒体及叶片磨损进行预测分析。通过法向接触能量与切向接触能量的对比,证明搅拌筒中的磨损主要为伴有冲击作用的磨粒磨损,搅拌车搅拌筒中搅拌叶片顶部的磨损较为严重。针对磨损比较严重的叶片顶部进行改进,采用T型耐磨结构等改进叶片结构,叶片顶部结构改进后搅拌筒使用寿命能得到明显提升。     

EFFECT OF DAMAGE EVOLUTION ON POISSON’S RATIO OF CONCRETE UNDER SULFATE ATTACK

Experimental results about concrete under sulfate attack are summarized,which include the variation of mass density of samples and velocity of ultrasonic wave propagating in samples.The evolution damage is analyzed in terms of the experimental results,and close attention is paid to the effect of damage evolution on Poisson’s ratio.This study shows that Poisson’s ratio is significantly affected by the concentration of solution and water-cement ratio.Poisson’s ratio of concrete changes very little when the water-cement ratio is selected as 0.6 or 0.8,so that such change may be neglected.If water-cement is 0.4,however,the Poisson’s ratio of the sample significantly changes.When the concrete sample of 0.4 water-cement ratio is immersed in sodium sulfate solution of 8% concentration for 285 days,Poisson’s ratio increase 10.14% compared with its initial value.There exist a sensitive region and a non-sensitive region for the change rate of Poisson’s ratio with respect to corrosion time.The change rate of Poisson’s ratio monotonously decreases with corrosion time in the sensitive region;in the non-sensitive region,the change rate of Poisson’s ratio is almost equal to zero.     

THE USE OF VISCO-ELASTOPLASTIC DAMAGE CONSTITUTIVE MODEL TO SIMULATE NONLINEAR BEHAVIOR OF CONCRETE

A visco-elastoplastic damage constitutive model is proposed for simulating nonlinear behavior of concrete. Based on traditional plastic theory, the irreversible deformation is simulated in effective stress space. In order to reflect different stiffness degradation mechanism of concrete under tensile and compressive loading conditions, both tensile and compressive damage variables are introduced, and then on the basis of energy release rate, the model is firmly derived within the concept of irreversible thermodynamics. The rate-dependent model is considered by introducing viscous regularization into the inelastic strain and damage variable, and combined with an additional elastic condition. Fully implicit backward-Euler algorithm is used to perform constitutive integration. Results of numerical examples using the proposed model agree well with test results for specimens under uniaxial tension and compression, biaxial loading and triaxial loading. Failure processes of single-edge-notched (SEN) beam and double-edge-notched (DEN) specimen are also simulated to further validate the proposed model.     

应用声发射技术的钢筋与混凝土粘结滑移特性研究

为研究钢筋与混凝土间的粘结滑移特性,分别对不同粘结长度的钢筋混凝土试件进行了拉拔试验,同时对粘结长度相同而钢筋外形不同的试件进行了比较试验.利用声发射技术采集相应波形信号,并对采集信号进行了小波去噪和Gabor小波时频分析.结果显示,各试件受力全过程均可分为完全粘结、局部脱粘、非线性滑移及残余粘结四个阶段;不同粘结长度...     

Prediction of the penetrated rust into the microcracks of concrete caused by reinforcement corrosion

Consider a steel-rust-concrete composite consisting of a circular cylindrical concrete cover and a coaxial uniformly corroding steel reinforcement. Prediction of the amount of rust penetrated into the microcracks of concrete cover from a set of data measured at the surface of the concrete is of particular interest. The steel is assumed to be linear isotropic and rust follows a power law stress–strain relation. For the concrete, anisotropic behavior and post-cracking softening model is employed. The formulations lead to a nonlinear boundary value problem which is solved analytically. A key parameter β, defined as the ratio of the volume of corrosion products inside the cracks to the volume of the cracks, is calculated. With some efforts, this parameter is also extracted from the available theoretical and experimental studies for the purpose of comparison. The effects of the mechanical properties of rust and concrete on β is addressed.     

水泥聚苯模壳格构式混凝土墙体的抗侧性能试验及分析

论文介绍6片不同高宽比的水泥聚苯模壳格构式混凝土墙体在轴压力和水平往复侧推力作用下的试验,分析这种墙体的抗侧强度、刚度和延性等力学性能.试验表明,高宽比大于1的墙体破坏时表现为墙体跟部的单一水平裂缝,其他部位完好;高宽比3∶4的墙体破坏时存在多条通过格构梁柱的斜向裂缝,墙体裂缝分布密集,变形能力好.