HFIP-Functionalized Co3O4 Micro-Nano-Octahedra/rGO as a Double-Layer Sensing Material for Chemical Warfare Agents

Semiconductor metal oxides (SMO)-based gas-sensing materials suffer from insufficient detection of a specific target gas. Reliable selectivity, high sensitivity, and rapid response–recovery times under various working conditions are the main requirements for optimal gas sensors. Chemical warfare agents (CWA) such as sarin are fatal inhibitors of acetylcholinesterase in the nerve system. So, sensing materials with high sensitivity and selectivity toward CWA are urgently needed. Herein, micro-nano octahedral Co₃O₄ functionalized with hexafluoroisopropanol (HFIP) were deposited on a layer of reduced graphene oxide (rGO) as a double-layer sensing materials. The Co₃O₄ micro-nano octahedra were synthesized by direct growth from electrospun fiber templates calcined in ambient air. The double-layer rGO/Co₃O₄-HFIP sensing materials presented high selectivity toward DMMP (sarin agent simulant, dimethyl methyl phosphonate) versus rGO/Co₃O₄ and Co₃O₄ sensors after the exposure to various gases owing to hydrogen bonding between the DMMP molecules and Co₃O₄-HFIP. The rGO/Co₃O₄-HFIP sensors showed high stability with a response signal around 11.8 toward 0.5 ppm DMMP at 125 °C, and more than 75 % of the initial response was maintained under a saturated humid environment (85 % relative humidity). These results prove that these double-layer inorganic–organic composite sensing materials are excellent candidates to serve as optimal gas-sensing materials.     

Elucidating Molecule–Plasmon Interactions in Nanocavities with 2 nm Spatial Resolution and at the Single‐Molecule Level

The fundamental understanding of the subtle interactions between molecules and plasmons is of great significance for the development of plasmon‐enhanced spectroscopy (PES) techniques with ultrahigh sensitivity. However, this information has been elusive due to the complex mechanisms and difficulty in reliably constructing and precisely controlling interactions in well‐defined plasmonic systems. Herein, the interactions in plasmonic nanocavities of film‐coupled metallic nanocubes (NCs) are investigated. Through engineering the spacer layer, molecule–plasmon interactions were precisely controlled and resolved within 2 nm. Efficient energy exchange interactions between the NCs and the surface within the 1–2 nm range are demonstrated. Additionally, optical dressed molecular excited states with a huge Lamb shift of ≈7 meV at the single‐molecule (SM) level were observed. This work provides a basis for understanding the underlying molecule–plasmon interaction, paving the way for fully manipulating light–matter interactions at the nanoscale.     

The effect of cationic groups on the stability of 19F MRI contrast agents in nanoparticles

Fluorine‐19 (¹⁹F)‐based contrast agents are increasingly used for magnetic resonance imaging. Conjugated to polymers, they provide an excellent quantitative imaging tool to detect the movement of the polymeric nanoparticles in vivo as there is no background signal in tissue. One of the challenges is the decline in signal intensity when the conjugated hydrophobic fluorinated functionalities aggregate. Therefore, a new fluorinated monomer was prepared from l ‐arginine that carries a 2,2,2‐trifluoroethyl functional group for imaging. The resulting monomer, 2,2,2‐trifluoroethylamide l ‐arginine methacrylamide (3FArgMA), was copolymerized with poly(ethylene glycol) methyl ether methacrylate (PEGMEMA), [2‐(2,3,4,6‐tetra‐O‐acetyl‐α‐d ‐mannopyranosyloxy)ethyl methacrylate or 1‐O‐methacryloyl‐2,3:4,5‐di‐O‐isopropylidene‐β‐d ‐fructopyranose, respectively, using poly(methyl methacrylate) macro‐reversible addition–fragmentation chain transfer polymerization agent. The resulting block copolymers, which varied in 3FArgMA content, were self‐assembled into micelles of hydrodynamic diameters from 25 to 60 nm. The permanently positively charged arginine functionality on the 3FArgMA displayed repulsive forces against aggregation enabling high spin–spin relaxation times (T₂) in acidic as well as alkaline solutions. However, the longer poly(ethylene glycol) side functionality in PEGMEMA enabled better steric stabilization (T₂~30 ms) while the short fructose side chain was not enough to maintain high T₂ values, in particular when a higher 3FArgMA content was used. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1994–2001     

Oxidative dehydrogenation of n-octane over a vanadium–magnesium oxide catalyst: Influence of the gas hourly space velocity

Oxidative dehydrogenation (ODH) of n-octane was carried out over a vanadium–magnesium oxide catalyst in a continuous flow fixed bed reactor. The catalyst was characterized by ICP–OES, powder XRD and SEM. The catalytic tests were carried out at different gas hourly space velocities (GHSVs), viz. 4000, 6000, 8000, and 10,000 h^?1. The best selectivity for octenes was obtained at the GHSV of 8000 h^?1, while that for C8 aromatics was attained at the GHSV of 6000 h^?1 at high temperatures (500 and 550 °C). The catalytic testing at the GHSV of 10,000 h^?1 showed the lowest activity, while that at the GHSV of 4000 h^?1 consistently showed the lowest ODH selectivity. Generally, the best ODH performance was obtained by the catalytic testing at the GHSVs of 6000 and 8000 h^?1. No phasic changes were observed after the catalytic testing.     

General Method for the Synthesis of Salicylic Acids from Phenols through Palladium‐Catalyzed Silanol‐Directed C?H Carboxylation

A silanol‐directed, palladium‐catalyzed C H carboxylation reaction of phenols to give salicylic acids has been developed. This method features high efficiency and selectivity, and excellent functional‐group tolerance. The generality of this method was demonstrated by the carboxylation of estrone and by the synthesis of an unsymmetrically o,o′‐disubstituted phenolic compound through two sequential C H functionalization processes.