Nafion修饰玻碳电极伏安法测定痕量铟

报道了一种用Nafion修饰玻碳电极测定痕量铟的新方法。研究了Na-fion膜的有关特性和测定的条件,当富集时间为5 min时,峰电流与In(Ⅲ)浓度在1×10-9~1×10-7mol/L的范围呈良好的线性关系,检出限为1.46×10-10mol/L。该法用于实际水样中痕量铟的测定,平均回收率为98.4%。     

Synthesis, structure and properties of SrAu3In3 and EuAu3In3—New indides with gold zig-zag chains

New indides SrAu₃In₃ and EuAu₃In₃ were synthesized by induction melting of the elements in sealed tantalum tubes. Both indides were characterized by X-ray diffraction on powders and single crystals. They crystallize with a new orthorhombic structure type: Pmmn, Z=2, a=455.26(9), b=775.9(2), c=904.9(2) pm, wR2=0.0425, 485 F² values for SrAu₃In₃ and a=454.2(2), b=768.1(6), c=907.3(6) pm, wR2=0.0495, 551 F² values for EuAu₃In₃ with 26 variables for each refinement. The gold and indium atoms build up three-dimensional [Au₃In₃] polyanionic networks, which leave distorted hexagonal channels for the strontium and europium atoms. Within the networks one observes Au2 atoms without Au-Au contacts and gold zig-zag chains (279 pm Au1-Au1 in EuAu₃In₃). The Au-In and In-In distances in EuAu₃In₃ range from 270 to 290 and from 305 to 355 pm. The europium atoms within the distorted hexagonal channels have coordination number 14 (8 Au+6 In). EuAu₃In₃ shows Curie-Weiss behavior above 50 K with an experimental magnetic moment of 8.1(1) μB/Eu atom. ¹⁵¹Eu Mössbauer spectra show a single signal at δ=−11.31(1) mm/s, compatible with divalent europium. No magnetic ordering was detected down to 3 K.     

Indium(III) chloride catalyzed one step synthesis of some new dibenzo(d,f)(1,3)dioxepines and 12H-dibenzo(d,g)(1,3)dioxocin derivatives

In the presence of catalytic amount of indium(III) chloride (10 mol %), 2,2′-dihydroxybiphenyl and bis(2-hydroxyphenyl)methane react quickly, without using any solvent, with ketones or β-keto esters possessing at least one hydrogen atom in α to the ketone-carbonyl group, to afford some new dibenzo(d,f)(1,3)dioxepines and some 12H-dibenzo(d,g)(1,3)dioxocin derivatives, respectively.     

Ternäre Thallium-Indium-Sulfide: Eine Zusammenfassung

Ternary Thallium Indium Sulfides: A Summary Combined thermal and X-Ray analyses in the ternary system Thallium—Indium—Sulfur show, that the two binary sections Tl₂S? In₂S₃ and TlS? InS contain ternary compounds with unique crystal structures. The chemical formulas of these ternary solids are TlIn₅S₈, TlIn₃S₅, TlInS₂ and Tl₃InS₃ for the section Tl₂S? In₂S₃ and TlIn₅S₆ as well as Tl₃In₅S₈ (metastable high temperature phase) for the section TlS? InS respectively. With TlIn₅S₇ an additional ternary solid could be detected, which is located outside the two sections. It is derived from the binary mixed valence compound In₆S₇ by complete substitution of In⁺ by Tl⁺. The following ionic formulations make the mixed valence character of the ternary Thallium—Indium-Sulfides reasonable: TlIn₅S₈ = Tl⁺(In³⁺)₅(S^2?)₈, TlIn₃S₅ = Tl⁺ (In³⁺)₃(S^2?)₅, TlInS₂ = Tl⁺In³⁺(S^2?)₂, Tl₃InS₃ = (Tl⁺)₃In³⁺ · (S^2?)₃, TlIn₅S₆ = Tl⁺([In₂]⁴⁺)₂In³⁺ (S^2?)₆, Tl₃In₅S₈ = 4 × [(Tl⁺)_0,75 · (In⁺)_0,25In³⁺(S^2?)₂], TlIn₅S₇ = Tl⁺[In₂]⁴⁺ (In³⁺)₃(S^2?)₇. All compounds contain Tl⁺-ions in a characteristic “lone pair coordination” of S^2? ions. Indium atoms however occur with the oxidation numbers +2 (formal, In₂ dumb bells with covalent In? In bonding) and +3 (with In³⁺ in tetrahedral and octahedral coordination of S^2?). Chemical preparation, crystal chemistry and general properties of the ternary solids are discussed, summarized and compared to each other.     

Mixed-metal flux synthesis of quaternary RMn2TrxZn20−x compounds with Tr=Al, In

Eighteen new intermetallic compounds RMn₂Tr_xZn_20−x (2<x<7; R=rare-earth metal; Tr=Al, In) were synthesized using low-melting mixtures of (Tr/Zn) as a solvent. Structural refinement using single-crystal X-ray diffraction data shows that the compounds are substituted variants of the cubic CeCr₂Al₂₀-type structure (Fd-3m, Z=8; unit cell parameters vary from a=14.1152(3)Å for YbMn₂Al_5.3Zn_14.7 to a=14.8125(4)Å for SmMn₂In_5.9Zn_14.1). The Zn and Tr elements show site preferences in the indium compounds, but not in the aluminum analogs. The substitution of trielide element for zinc modifies the valence electron count of the compounds to allow for the incorporation of Mn into the structure. Magnetic susceptibility data show no evidence of magnetic ordering down to 3 K.     

Indium(III) one-dimensional polymers with pyrazine and pyrazine, 2-carboxylic acid as the spacer molecules

The reactions of indium(III) chloride tetrahydrate with pyrazine (C₄H₄N₂) and pyrazine, 2-carboxylic acid afford two polymeric frameworks, the structures of which were characterized in the solid state by single crystal analysis. The former is a one-dimensional infinite structure interlinked by the pyrazine spacer, while the latter is a one-dimensional ‘zigzag’ polymeric structure. A dimeric indium(III) pyrazine complex is also reported.     

Gold nanoparticle arrays directly grown on nanostructured indium tin oxide electrodes: Characterization and electroanalytical application

This work describes an improved seed-mediated growth approach for the direct attachment and growth of mono-dispersed gold nanoparticles on nanostructured indium tin oxide (ITO) surfaces. It was demonstrated that, when the seeding procedure of our previously reported seed-mediated growth process on an ITO surface was modified, the density of gold nanospheres directly grown on the surface could be highly improved, while the emergence of nanorods was restrained. By field emission scanning electron microscopy (FE-SEM) and cyclic voltammetry, the growth of gold nanoparticles with increasing growth time on the defect sites of nanostructured ITO surface was monitored. Using a [Fe(CN)₆]³⁻/[Fe(CN)₆]⁴⁻ redox probe, the increasingly facile heterogeneous electron transfer kinetics resulting from the deposition and growth of gold nanoparticle arrays was observed. The as-prepared gold nanoparticle arrays exhibited high catalytic activity toward the electrooxidation of nitric oxide, which could provide electroanalytical application for nitric oxide sensing.     

Diorganomorpholinometallane von Gallium und Indium – Monomer‐Dimer‐Gleichgewichte in Lösung

Diorganomorpholinometalates of Gallium and Indium – Monomer‐Dimer‐Equilibrium in Solution The reaction of Li[N(CH₂CH₂)₂O] (LiMorpholinate; Li(Morph)) with Me₂GaCl and Me₂InCl gives by salt‐elimination the diorganoamidometalates Me₂M(Morph) ( M = Ga: 1 ; M = In: 2 ), respectively. 1 and 2 were characterized by NMR and vibrational spectroscopy as well as by X‐ray structure determinations. According to this, centrosymmetrical dimers are present in the solid state while a monomer‐dimer equilibrium was assumed for the THF‐solution. Cryoscopic molecular weight determinations confirmed our assumptions.     

Kinetic parameters of the In(III)/In(I) electrode reaction in bromide medium

The electrode kinetic parameters of the In(III)/In(I) couple in acidic 4M bromide solution have been determined by means of the rotating disc electrode technique.

---

Die elektrochemisch-kinetischen Parameter des In(III)/In(I)-Redoxsystems in Bromidlösung (Kurze Mitteilung)

Zusammenfassung Die elektrochemisch-kinetischen Parameter am In(III)/In(I)-Redoxsystem wurden in saurer 4-M-Bromidlösung mittels der rotierenden Scheibenelektrode bestimmt.