Validation of quartz crystal rheometry in the megahertz frequency regime

The utility of the quartz crystal microbalance (QCM) as a high‐frequency rheometer operating at 15 MHz was demonstrated. High‐frequency data obtained from a series of rubbery materials were compared with results obtained from traditional dynamic mechanical analysis (DMA) at much lower frequencies. The high‐frequency data enable meaningful shift factors to be obtained at temperatures much further above glass‐transition temperature (T _g) than would otherwise be possible, giving a more complete picture of the temperature dependence of the viscoelastic properties. The QCM can also be used to quantify mass uptake and changes in viscoelastic properties during sample oxidation. The viscoelastic response spanning the full range of behaviors from the rubber to glassy regimes was found to fit well with a six‐element model consisting of three power‐law springpot elements. One of these elements is particularly sensitive to the behavior in the transition regime where the phase angle is maximized. The value of this quantity is obtained from the maximum phase angle, which can be obtained from a temperature sweep at fixed frequency, proving a means for more detailed frequency‐dependent rheometric information to be obtained from a fixed‐frequency measurement at a range of temperatures. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1246–1254     

Quantitative estimations of bivariate summation‐integral–type operators

In this paper, we study the approximation properties of bivariate summation‐integral–type operators with two parameters . The present work deals within the polynomial weight space. The rate of convergence is obtained while the function belonging to the set of all continuous and bounded function defined on ([0],∞)(×[0],∞) and function belonging to the polynomial weight space with two parameters, also convergence properties, are studied. To know the asymptotic behavior of the proposed bivariate operators, we prove the Voronovskaya type theorem and show the graphical representation for the convergence of the bivariate operators, which is illustrated by graphics using Mathematica. Also with the help of Mathematica, we discuss the comparison by means of the convergence of the proposed bivariate summation‐integral–type operators and Szász‐Mirakjan‐Kantorovich operators for function of two variables with two parameters to the function. In the same direction, we compute the absolute numerical error for the bivariate operators by using Mathematica and is illustrated by tables and also the comparison takes place of the proposed bivariate operators with the bivariate Szász‐Mirakjan operators in the sense of absolute error, which is represented by table. At last, we study the simultaneous approximation for the first‐order partial derivative of the function.     

Highly Sensitive AdSV Method for Fe(III) Determination in Presence of Solochrome Violet RS on Renewable Amalgam Film Electrode

The new DP AdSV method for high sensitive Fe(III) determination in the presence of Solochrome Violet RS was developed. The use of an innovative renewable amalgam film electrode Hg(Ag)FE allowed to obtain high sensitivity and significantly minimize the mercury consumption. The best results were obtained for surface area of Hg(Ag)FE equal to 11.8 mm². Instrumental parameters were optimized. The optimal results were obtained using differential pulse technique for the following values: sampling and waiting time ts=tw=10 ms, step potential Es=5 mV, pulse amplitude ΔE=50 mV. Measurements were conducted in 0.05 M acetate buffer (pH 5.6), the concentration of SVRS was equal to 5 μM. Deposition step was carried out at the potential ?400 mV for 20 s. Calculated detection limit for 40 s preconcentration time was equal to 1.4 nM (78 ng L^?1). The influence of the common in environment, organic and inorganic interferences was studied. The developed method for Fe(III) determination was successfully applied and validated by investigation of certified reference material SPS‐SW2 Batch 118 and recovery of Fe(III) from various spiked samples as snow, tap water and bottom sediments. The repeatability (for 50 nM of Fe(III)) of the developed method expressed as CV was equal 3.1 % (n=5).     

The double deflating technique for irreducible singular M-matrix algebraic Riccati equations in the critical case

As is known, Alternating-Directional Doubling Algorithm (ADDA) is quadratically convergent for computing the minimal nonnegative solution of an irreducible singular M-matrix algebraic Riccati equation (MARE) in the noncritical case or a nonsingular MARE, but ADDA is only linearly convergent in the critical case. The drawback can be overcome by deflating techniques for an irreducible singular MARE so that the speed of quadratic convergence is still preserved in the critical case and accelerated in the noncritical case. In this paper, we proposed an improved deflating technique to accelerate further the convergence speed – the double deflating technique for an irreducible singular MARE in the critical case. We proved that ADDA is quadratically convergent instead of linearly when it is applied to the deflated algebraic Riccati equation (ARE) obtained by a double deflating technique. We also showed that the double deflating technique is better than the deflating technique from the perspective of dimension of the deflated ARE. Numerical experiments are provided to illustrate that our double deflating technique is effective.     

On the Relative Gain Array (RGA) with singular and rectangular matrices

This paper identifies a significant deficiency in the literature on the application of the Relative Gain Array (RGA) formalism in the case of singular matrices. Specifically, it is shown that the conventional use of the Moore–Penrose pseudoinverse is inappropriate because it fails to preserve critical properties that can be assumed in the nonsingular case. It is then shown that such properties can be rigorously preserved using an alternative generalized matrix inverse.     

Inhibition effect of butan-1-ol on the corrosion behavior of austenitic stainless steel (Type 304) in dilute sulfuric acid

The electrochemical behavior of austenitic stainless steel (Type 304) in 3 M sulfuric acid with 3.5% recrystallized sodium chloride at specific concentrations of butan-1-ol was investigated with the aid of potentiodynamic polarization, open circuit measurement and weight loss technique. Butan-1-ol effectively inhibited the steel corrosion with a maximum inhibition efficiency of 78.7% from weight-loss analysis and 80.9% from potentiodynamic polarization test at highest concentration studied. Adsorption of the compound obeyed the Freundlich isotherm. Thermodynamic calculations reveal physiochemical interactions and spontaneous adsorption mechanism. Surface characterizations showed the absence of corrosion products and topographic modifications of the steel. Statistical analysis depicts the overwhelming influence and statistical significance of inhibitor concentration on the inhibition performance.     

Cyclohexane‐1,3‐dione as a derivatizing agent for the analysis of aldehydes by micelar electrokinetic chromatography with diode array detection

Aldehydes are important compounds in a large number of samples, especially food and beverages. In this work, for the first time, cyclohexane‐1,3‐dione (CHD) was used as a derivatizing reagent aiming aldehyde (formaldehyde, acetaldehyde, propionaldehyde, and valeraldehyde) analysis by MEKC‐DAD. The optimized separation of the derivates was performed using a voltage program (+20 kV, 0–15 min.; +23 kV, 15–17 min.) at a temperature of 26°C, and using as the running buffer a mixture containing 100 mmol/L of sodium dodecyl sulfate and 29 mmol/L of sodium tetraborate at pH 9.2, with maximum absorbance at 260 nm. CHD was compared with two other derivatizing agents: 3‐methyl‐2‐benzothiazolinone hydrazone and phenylhydrazine‐4‐sulfonic acid. The CHD‐aldehyde derivatives were also characterized by LC‐MS. The calibration curves for all aldehydes had r² above 0.999 and LODs ranged from 0.01 to 0.7 mg/L. The optimized methodology was applied in sugar cane brandy (cachaça) samples successfully. CHD showed to be an alternative derivatization reagent due to its stability, aqueous solubility, high selectivity and sensitivity, reduced impurities, and simple preparation steps.     

Insight into shear‐induced modification for improving processability of polymers: Effect of shear rate on the evolution of entanglement state

Many experimental results have revealed that the re‐entanglement kinetics of disentangled polymers is much slower than that predicted by tube theory. This retarded recovery of fully entangled state is of practical significance that shear‐induced modification may offer a way to improve processability for a polymer by reducing viscosity. This work tried to figure out the shear‐rate dependence variation of viscosity in the view of evolution of entanglement state through disentanglement and re‐entanglement, aiming to provide fundamental insights into application prospect of shear‐induced modification in preparing “in‐pellet” disentangled polymers prior to final processing. High‐density polyethylene was sheared on a parallel‐plate rotational rheometer with a linearly increased shear rate. Results showed that higher shear rate could induce further disentanglement, resulting in a lower viscosity with a reduction rate up to 93.7%, larger molecular weight between entanglements M_e , and longer re‐entanglement time. Additionally, less entanglement would give a larger lamellar thickness of sheared samples after nonisothermal crystallization. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 598–606     

Synthesis and Structures of Arene Ruthenium (II)–NHC Complexes: Efficient Catalytic α‐alkylation of ketones via Hydrogen Auto Transfer Reaction

A panel of six new arene Ru (II)‐NHC complexes 2a‐f , (NHC = 1,3‐diethyl‐(5,6‐dimethyl)benzimidazolin‐2‐ylidene 1a , 1,3‐dicyclohexylmethyl‐(5,6‐dimethyl)benzimidazolin‐2‐ylidene 1b and 1,3‐dibenzyl‐(5,6‐dimethyl)benzimidazolin‐2‐ylidene 1c ) were synthesized from the transmetallation reaction of Ag‐NHC with [(η⁶‐arene)RuCl₂]₂ and characterized. The ruthenium (II)‐NHC complexes 2a‐f were developed as effective catalysts for α‐alkylation of ketones and synthesis of bioactive quinoline using primary/amino alcohols as coupling partners respectively. The reactions were performed with 0.5 mol% catalyst load in 8 h under aerobic condition and the maximum yield was up to 96%. Besides, the different alkyl wingtips on NHC and arene moieties were studied to differentiate the catalytic robustness of the complexes in the transformations.     

Et2Zn-mediated stoichiometric C(sp)-H silylation of 1-alkynes and chlorosilanes

A first example of an Et₂Zn mediated silylation of 1-aklynes is reported. A series of functional groups are tolerated in this reaction. Mechanistic studies support Zn alkynilides as intermediates in the reaction. This reaction protocol provides a practical method for the preparation of alkynylsilanes and expands the application of organometallic zinc in organic synthesis.