扶手椅型石墨烯介观环中的持续电流

在紧束缚近似下, 解析求解了扶手椅型边界石墨烯介观环的能量本征值问题, 计算和讨论了不同大小尺寸的介观环中持续电流随Aharonov-Bohm (A-B)磁通的变化, 并证明了能级和持续电流关于磁通变化的周期性和特殊对称性. 研究表明, 持续电流显著地依赖于介观环的几何结构; 零能量附近的能级可以承载较大的持续电流, 而远离零能量的其他能级对持续电流的贡献很小.     

New phosphorus- and nitrogen-containing poly(methyl methacrylate)-based copolymer

Journal of Thermal Analysis and Calorimetry - Pure poly(methyl methacrylate) (PMMA) always exhibits high flammability and low thermal stability. To address that, a novel reactive comonomer...     

Biobased PLA/NR-PMMA TPV with balanced stiffness-toughness: In-situ interfacial compatibilization,performance and toughening model

Using rubber to toughen polylactide (PLA) is always accompanied by the sharp reduction in stiffness. Herein, PLA/poly (methyl methacrylate) grafted natural rubber (NR-PMMA) thermoplastic vulcanizates (TPVs) with balanced stiffness-toughness were fabricated. With the addition of 40 wt % NR-PMMA, the impact strength and tensile toughness of PLA/NR-PMMA TPV significantly improved to about 102.7 kJ/m² and 66.1 MJ/m³, respectively, compared with those of 2.7 kJ/m² and 2.4 MJ/m³ for the pure PLA. Meanwhile, the yielding stress was maintained at 34.5 MPa. Fourier transform infrared spectroscopy (FTIR) confirmed the formation of in-situ interfacial compatibilization between PLA and rubber phases. Both tensile and impact toughening mechanism were studied and deduced as considerable energy dissipation provided by the continuous rubber phase. Instrumented notched impact tests demonstrated that the energy dissipating in crack propagation process contributed to the main part of impact toughness. In addition, a novel toughening model based on bicontinuous structure was incorporated, which showed good applicability in predicting the impact strength of PLA/NR-PMMA TPVs.     

Composition-Tunable Antiperovskite CuxIn1−xNNi3 as Superior Electrocatalysts for the Hydrogen Evolution Reaction

A group of newly reported antiperovskite nitrides Cu_xIn_1−xNNi₃ (0≤x≤1) with tunable composition are employed as electrocatalysts for the hydrogen evolution reaction (HER). Cu_0.4In_0.6NNi₃ shows the highest intrinsic performance among all developed catalysts with an overpotential of merely 42 mV at 10 mA cm_geo⁻². Stability tests at a high current density of 100 mA cm_geo⁻² show its super-stable performance with only 7 mV increase in overpotential after more than 60 hours of measurement, surpassing commercial Pt/C (increase of 170 mV). By partial substitution, the derived antiperovskite nitride achieves a smaller kinetic barrier of water dissociation compared to the unsubstituted InNNi₃ and CuNNi₃, revealed by first-principle calculations. It is found that the partially substituted Cu_xIn_1−xNNi₃ possesses a thermal neutral and desirable Gibbs free energy of hydrogen for HER, ascribed to the tailoring of the energy of d-band center arose by the A-site (A=Cu or In) substitution and a resulting optimization of adsorbate interactions.     

Exact maximum likelihood estimator for drift fractional Brownian motion at discrete observation

This paper deals with the problems of consistency and strong consistency of the maximum likelihood estimators of the mean and variance of the drift fractional Brownian motions observed at discrete time instants. Both the central limit theorem and the Berry-Ess′een bounds for these estimators are obtained by using the Stein’s method via Malliavin calculus.     

Exact solutions of the generalized K(m, m) equations

Family of equations, which is the generalization of the K(m, m) equation, is considered. Periodic wave solutions for the family of nonlinear equations are constructed.     

基于反馈和多最小二乘支持向量机的分数阶混沌系统控制

根据分数阶线性系统的稳定理论,将混沌系统分成稳定的线性部分和相应的非线性部分.设计主动控制器,对非线性部分进行补偿,从而将分数阶混沌系统控制到平衡点.为了提高主动控制器的补偿能力,提出基于反馈的多最小二乘支持向量机(M-LS-SVM)拟合模型.通过减聚类方法将输入空间划分为一些小的局部空间,在每个局部空间中用LS-SVM建立子模型.为解决子模型相互之间的严重相关问题,提高模型的精度和鲁棒性,各个子模型的预测输出通过主元递归(PCR)方法连接.仿真实验表明该方法有助于提高补偿精度和系统响应指标. 关键词： 分数阶 混沌系统 多最小二乘支持向量机 反馈     

水中镉含量的激光诱导击穿光谱高灵敏快速检测

 为了对水中的痕量镉进行高灵敏快速检测,实验采用一种未受污染的薄木片作为基底来吸收水样品,将其晾干后再用激光诱导击穿光谱（LIBS）技术对其进行分析,克服了用LIBS技术直接分析水样品时灵敏度低和稳定性差等问题。实验中选择214.44 nm的镉离子线作为分析线以提高光谱检测的灵敏度,建立了用于定量分析的校正曲线,镉的检出限达到55 μg/L,重复测量的信号相对标准偏差小于5%,单次测量的时间短于5 min。     

Phase locking of a compact Nd-doped phosphate multicore fiber laser

Two compact fiber lasers based on the gain medium of Nd-doped phosphate glass multicore fiber (MCF), of length no more than 10 cm, have been demonstrated experimentally for the first time. A stable phase-locked laser beam at 1055 nm emitted from a three-core fiber that is 8.5 cm in length has been achieved, with a maximum output power of 20 mW. The properties of similar seven-core fiber laser also have been investigated.     

Q-switched mode-locking femtosecond all-fiber laser based on Er3+/Yb3+ codoped phosphate fiber

A Q-switched mode-locking femtosecond all-fiber laser based on a 2 cm long homemade Er³⁺/Yb³⁺ codoped phosphate glass fiber has been reported. By using the nonlinear polarization evolution technique, a nearly 100% modulation depth of mode-locking pulse train is achieved. At a pump power of 410 mW, the energy of each Q-switched envelope, whose width is about 220 μs, is 10 μJ, while the duration of mode-locking pulse within the Q-switched envelope is 318-fs.