裂缝引起结构特征值、特征向量改变量的研究

结构出现裂缝时,动力特性发生变化.本文通过寻找反映裂缝特性的结构总刚矩阵的变化ΔK,直接求得裂缝引起的结构的特征值及特征向量的改变量,为有缝结构动力特性研究提供了一个简单可行的方法.     

横观各向同性体应力波传播问题的特征分析

本文根据广义特征理论,对横观各向同性体轴对称弹性波传播问题进行了理论分析。提出了一个简化特征分析的方法,这种方法将成为应用特征线法求解各类各向异性应力波问题的一个突破口。     

Principal parametric and three-to-one internal resonances of flexible beams undergoing a large linear motion

A set of nonlinear differential equations is established by using Kane‘s method for the planar oscillation of flexible beams undergoing a large linear motion. In the case of a simply supported slender beam under certain average acceleration of base, the second natural frequency of the beam may approximate the tripled first one so that the condition of 3 : 1 internal resonance of the beam holds true. The method of multiple scales is used to solve directly the nonlinear differential equations and to derive a set of nonlinear modulation equations for the principal parametric resonance of the first mode combined with 3 : 1 internal resonance between the first two modes. Then, the modulation equations are numerically solved to obtain the steady-state response and the stability condition of the beam. The abundant nonlinear dynamic behaviors, such as various types of local bifurcations and chaos that do not appear for linear models, can be observed in the case studies. For a Hopf bifurcation,the 4-dimensional modulation equations are reduced onto the central manifold and the type of Hopf bifurcation is determined. As usual, a limit cycle may undergo a series of period-doubling bifurcations and become a chaotic oscillation at last.     

基于CUDA的有限元矩阵并行装配算法研究

构建航天飞行器的结构有限元模型是准确模拟飞行仿真、完成飞行器在轨飞行阶段结构故障监测和诊断的基础。采用细长体飞行器简化梁模型，提出新的基于CUDA（Compute Unified Device Architecture）的有限元单元刚度矩阵生成和总刚度矩阵组装算法。依据梁单元矩阵的对称性，结合GPU硬件架构提出并行生成算法并进行改进。为有效减少装配时间，在装配过程中采用着色算法，提出了基于GPU（Graphics Processing Unit）共享内存的非零项组装策略，通过在不同计算平台下算例对比，验证了新算法的快速性。数值算例表明，本文算法的求解效率较高，针对一定计算规模内的模型可满足快速计算与诊断的实时性要求。     

基于变形场测量数据主元压缩的模型参量反求方法

利用主元分析法对数字图像相关技术所测结构变形信息进行数据压缩,并进一步用于力学模型未知参量的反求计算。首先,为降低数字图像相关技术所测庞大数据的应用成本,提出利用主元分析法对结构表面变形场数据进行压缩,实现在保留结构表面变形信息主要特征的前提下显著降低数据量的目的;其次,针对压缩后的数据建立了基于最小二乘法的力学模型参量反求模型,并利用高斯牛顿法进行求解;最后,以具体算例从计算精度、收敛速度和抗噪性等方面验证了数据压缩对模型参量反求的效果。研究结果表明,所提方法在显著降低使用数据量的前提下,能够有效提高力学模型参量反求计算的收敛速度,特别是对于包含多个模型参数的反求问题,具有较高的精度和较好的稳定性。     

CHARACTERIZATIONS AND RELATIONSHIPS BETWEEN OUTDOOR AND INDOOR BIOAEROSOLS IN AN OFFICE BUILDING

1.IntroductionBioaerosolsaremicroorganismsorparticles,gases,vapors,orfragmentsofbiologicalorigin(i.e.,aliveorreleasedfromalivingorganism)thatexistintheair.Bioaerosolsareeverywhereintheenvironment.Underfavorableconditions,bioaerosolsareabletogrowandpropagateonavarietyofbuildingmaterialsandindoorsurfaces,causingindoorairpollution.Therefore,owingtotheirubiquitouspresenceinnature,bioaerosolsasapollutionsourcearealmostinevitableinarangeofenclosedenvironmentsandincommunityair(Kodama&McGee,1986;Lig…     

HKD-1型航空润滑油特征剪切应力及有效粘压系数确定的研究

在球盘式拖动力试验机上,对HKD-1型航空润滑油进行拖动力测量,给出了根据拖动力试验曲线的非线性上升段确定润滑油有效粘压系数和特征应力的方法,对HKD-1型航空润滑油在试验条件下的粘压系数和特征应力进行分析,并建立了其计算公式.结果表明:特征应力和有效粘压系数的求解方法简单合理,其计算公式的拟合精度较高,可为轴承动态特性设计提供计算依据;随着接触压力、入口油温和滚动速度增加,HKD-1型航空润滑油的特征应力增大,其粘压系数减小;滚动速度对特征应力和粘压系数的影响小于接触压力和入口油温.     

冰排与斜面结构作用时的破断长度分析

研究了冰排与斜面结构的相互作用过程．文中将冰排分为在斜面附近脱离水面部分和较远处漂浮于水面部分两个区域，建立了冰排因弯曲而发生破断的数学模型，根据弯矩分布分析了冰排可能的破断位置，从而得到冰排与斜面结构相互作用时的破断长度解析表达式．结果表明，冰排破断长度既不是冰厚的固定倍数，也不与冰排特征长度直接相关．计算结果与前人实验结果吻合较好，可以为近海冰区抗冰结构的设计提供参考．     

PREPARATION AND CHARACTERIZATION OF SUPERPARAMAGNETIC FUNCTIONAL POLYMERIC MICROPARTICLES

Superparamagnetic poly(styrene-divinylbenzene-glycidyl methacrylate) (Pst-DVB-GMA) microparticles were prepared via a modified suspension polymerization process. A magnetic fluid was first prepared by a chemical co-precipitation method. Then magnetic microparticles were produced by mixing the monomers and the magnetic fluid with water in the presence of a stabilizer poly(vinyl pyrrolidone) (PVP) to form a suspension, and finally benzoyl peroxide was added to initiate the co-polymerization. The morphology and magnetic properties of the microparticles were examined by TEM and VSM. The spherically shaped microparticles, with a size range of 4 to 7 pm, showed distinct superparamagnetic characteristics. XRD was used to investigate the structure of the magnetite particles dispersed in the polymer matrix. The microparticles with epoxy groups on their surface can be applied directly to the seoaration of biomolecules.     

冲击载荷形状对阻尼介质中结构最终塑性变形的影响

分析了在阻尼介质中当保持相关参量相同时，冲击载荷形状对简支刚塑性圆板和圆柱薄壳的最终塑性变形的影响。在结构物高载阶段的运动中，考虑了阻尼介质对塑性铰区移行的影响。结果表明:在阻尼介质中，文献［６］中相关参量的概念仍然可以沿用，但结构的最终塑性变形与相关参量的关系式Ｗ＿ｏｆ＝Ｉ￣２＿ｅＧ（Ｐ＿ｅ）应由更一般的表达式来代替。