KrF激光诱导BrC2F4Br+C2H4反应

激光诱导化学合成是一有兴趣的课题。不久前已报导了红外激光诱导调聚反应的结果。由于红外激光的加热特性,在许多情况下导致选择性与量子产率的矛盾。因紫外光反应的低温特性,有可能获得较高的选择性。但普通光源是宽带光源,对一个以平方断链为主的链反应,过强的吸收不利于链长的提高,而弱吸收又使反应速度太慢。为此,激光光源是满足最佳吸收的合宜光源。在使用了昂贵的激光光源后,经济上的合理性主要取决于链长     

The Analysis and Improving of the Microwave Exciter in the Lower Hybrid Wave System

When we carry out lower hybrid wave heating and current driving plasma experiment at tokamak, we need mega-watt order of microwave power. The microwave signal at frequency of 2450 MHz is generated by a microwave exciter. According to the experiment＇s demands, the microwave exciter must provide output power of 1.5～ 2. 5 W with stabilized frequency and amplitude tobe used as the klystron input. Being amplified by the klystron, the microwave signal is transmitted through the transmitting system to the antenna and is emitted into the HL-2A tokamak. So we can see that the microwave exciter＇s function is very important to the lower hybrid wave heating and current driving plasma experiment.     

Fabrication of Dendrimer－like PAMAM Based on Silica Nanoparticles

A G 4.0 dendrimer-like poly (amido amine) (PAMAM) based on silica nanoparticles was fabricated via a divergent approach.It was built from γ-aminopropyi silica nanoparfides (APSN) core via repetitive addition of acrylate (MA) and hexylenediamine (HDA). FT-IR and EA were used to monitor the progress of dendrimer during each step. The amino group content of the resulting product increased from 0.49 to 3.72 mmol/g after the 4th generation. In addition, the percentage of grafting increased with increasing generation and reached to 65.9% after 4th generation. It was found that the resulting silica nanoparticles could be dispersed in methanol with a mean hydrodynamic particle diameter of 152.7 nm although the silica nanoparticles had agglomerated during the storage period.     

相对论重离子碰撞实验中混合事件方法的研究

把RQMD(Relativistic Quantum Molecular Dynamics)产生器产生的数据输入作为原始事例取样,讨论了在比较复杂的背景情况下,一种新的混合事件方法,用以证实在相对论重离子碰撞实验中高能量激发共振态的存在.并以共振态重子Δ⁺⁺为例演示了这一方法的应用.     

强场物理与快点火靶的制备

采用本体聚合技术合成全氘代聚苯乙烯（DPS），所得聚合物分子量约250000，分散度约3，氘代率为98．7％。采用热诱导相分离技术制备全氘代聚苯乙烯泡沫。在室温溶解DPS于溶剂中，然后转入轴向冷却模具，进行单向冷却，直到溶剂完全冷冻，最后取出冷冻样置于冷冻干燥仪中进行冷冻干燥，待溶剂完全脱出后即得泡沫。通过对二恶烷／环己烷混合溶剂相图，以及PS一混合溶剂体系的相图的测定，     

类铍离子低激发态等电子系列的能量、精细结构和超精细结构

采用多组态相互作用方法及Rayleigh-Ritz 变分方法，并考虑相对论修正和质量极化效应，获得了类铍离子等电子系列（Z=4-10）低激发态1s²2p2p ¹D^e和1s²2p3p ³P^e的相对论能量。同时还计算了精细结构和超精细结构。计算结果与其他理论和实验符合的很好。     

Resonantly Enhanced Continuous-Wave Four-Wave Mixing in a Five-Level Cold Atomic Medium

Using Schroedinger-Maxwell formalism, we propose and analyse a cw four-wave mixing (FWM) scheme for the generation of coherent light in a five-level double-∧ atomic system based on electromagnetically induced transparency. We derive the corresponding explicit analytical expressions for the generated FWM field. The influence of hyperfine sublevel on the amplitude of the generated FWM field is predicted in detail. We also give a brief discussion on the experimental realization of the proposed scheme.     

乌桕类可可脂结晶过程中表现体积变化

为了解乌桕类可可脂(CTCBE)缓冷结晶横向胀罐爆裂原因，研究CTCBE结晶过程中的膨胀特性，采用流体静力法测试了不同等温结晶条件下CTCBE结晶形成的表观密度和表观体积及其横纵向膨胀状况。结果表明，CTCBE缓冷结晶后形成外部和中部两个晶区。在5-25℃的各等温结晶范围内，当结晶温度增加时，外部结晶区域减小、表观密度变化不大；中部结晶区域增大、表观密度明显减小，CTCBE的表观体积、横向、纵向膨胀率均增大，膨胀横向大于纵向。进一步表明CTCBE在自然缓冷固化的表观体积根本上由其结晶温度决定。为有效防止横向胀罐，自然缓冷固化温度应低于10℃。     

张量对称类上诱导线性算子的数值半径

设V是一个n维线性空间,V_x~m(G)为V上的张量对称类.A为V的线性算子T的矩阵,K(A)为V_x~m(G)上的诱导线性算子K(T)的矩阵.本文从K(A)的数值半径Υ(K(A))和可分数值半径Υ_x(K(A))定义出发,研究了Υ(K(A))、Υ_x(K(A))与范数||A||_p(1≤p≤2)、广义矩阵函数d_x~G(A)的关系,得到了它们之间的两个不等式.