基于氧化石墨烯的环糊精型色谱固定相的制备及在对映体分离与亲水色谱中的应用

将氧化石墨烯(GO)通过酰胺键键合到氨基硅胶上,进一步将β-环糊精(β-CD)化学键合于GO上,制备了一种新型手性固定相材料,采用IR、SEM、TEM、元素分析和热重分析进行了表征。7种对映体得到不同程度的拆分,同时此固定相表现出典型的亲水作用色谱(HILIC)特征,4种核苷小分子在流动相为甲醇-乙腈-水(45∶45∶10,V/V)时得到分离。通过考察流动相组成、温度、pH值对分析物保留的影响,进一步探讨了该固定相的分离机理。在20~60℃时,温度越低越有利于分析物质分离;加入质子化溶剂甲醇,4种分析物的保留时间显著减弱;pH值的改变影响分析物的质子化程度进而改变与固定相作用力和保留时间。结果表明,此色谱固定相中GO和β-CD在手性拆分中具有协同作用,而在HILIC中分析物的保留归因于混合模式的保留机理,包括亲水作用、静电作用、氢键、π-π堆积作用等。     

模糊信息差异及唯一性定理证明

定义了模糊相对熵,基于模糊熵和距离定义了模糊信息差异、拟模糊信息差异,并讨论了模糊信息差异唯一性定理以及模糊信息差异的性质.     

Antibacterial thermoplastic polyurethane electrospun fiber mats prepared by 3-aminopropyltriethoxysilane-assisted adsorption of Ag nanoparticles

Antibacterial thermoplastic polyurethane(TPU) electrospun fiber mats were prepared by adsorption of Ag nanoparticles(Ag NPs) onto TPU/3-aminopropyltriethoxysilane(APS) co-electrospun fiber mats from silver sol. The use of APS can functionalize TPU fibers with amino groups, facilitating the adsorption of Ag NPs. The effects of p H of silver sol and APS content on Ag NP adsorption and antibacterial activity were investigated. Ag NP adsorption was evidenced by TEM, XPS and TGA. Significant Ag NP adsorption occurred at p H = 3-5. The main driving force for Ag NP adsorption is electrostatic interaction between ―NH3~+ of the fibers and ―COO-derived from the ―COOH group capped on the surfaces of Ag NPs. The antibacterial activity of the Ag NP-decorated TPU/APS fiber mats was investigated using both gram-negative Escherichia coli and gram-positive Bacillus subtilis. The antibacterial rate increases with increasing APS content up to 5% where the antibacterial rates against both types of bacteria are over 99.9%.     

微乳法制备纳米Ru/NaY催化剂及其催化对苯二酚加氢

采用曲拉通X-100(Triton X-100)/正己醇/正庚烷/RuCl_3·3H_2O水溶液构成微乳液,以水合肼为还原剂,制备了纳米Ru颗粒,再破乳将其负载于NaY分子筛得到M-Ru/NaY催化剂.通过XRD、BET、XPS、SEM、TEM及DSC分析方法对催化剂进行了表征.表征结果表明,M-Ru/NaY催化剂具有金属钌平均粒径小,分布均匀,高度分散等优点.以对苯二酚加氢制1,4-环己二醇为探针反应,对微乳法和传统浸渍法制备的催化剂活性和选择性进行了比较,深入研究了催化剂用量,反应温度,氢气压力对对苯二酚加氢活性的影响及最佳反应时间的确定.实验结果表明,M-Ru/NaY催化剂在反应温度150℃,氢气压力4.0 MPa,m(M-Ru/NaY)∶m(对苯二酚)=0.2∶1,溶剂为异丙醇,此条件下反应30 min,对苯二酚转化率为100%,1,4-环己二醇的选择性高达92.6%.还考察了M-Ru/NaY催化剂的稳定性.最后,探讨了对苯二酚加氢反应路径.     

气相色谱–质谱法测定食用植物油中23种农药残留

建立了测定食用植物油中23种农药残留的气相色谱–质谱联用方法。采用固相萃取,以乙腈超声提取,经过PSA,C_(18)柱进行净化,用气相色谱–质谱法测定,外标法定量。23种农药在0.01~1.0 mg/L范围内与色谱峰面积线性关系良好,相关系数为0.997 3~0.999 7,方法检出限为5~15μg/kg。测定结果的相对标准偏差为2.25%~9.40%(n=6),加标回收率为78.4%~127.3%,可以满足食用植物油中多种农药残留的同时分析。采用该方法对国内市场常见的食用植物油进行检测分析,所检测的农药残留均在国家标准的限量范围内。     

基于遗传算法的光伏–热电耦合系统多目标优化研究

多因素共同作用下的系统优化设计是光伏–热电耦合系统研究的难点之一。本文建立了光伏–热电耦合系统与单一光伏系统的理论模型,以最高耦合效率与相对于单一光伏系统的最大效率差值为优化目标,采用多目标遗传算法,开展了耦合系统优化设计研究。结果表明,最高耦合效率与最大效率差值两个优化目标是负相关的,且其负相关性是由光伏参考效率所导致,需综合考虑系统经济性,确定最高耦合效率和最大效率差值的折中方案,从而获得耦合系统最佳设计。     

Tolman length of simple droplet: Theoretical study and molecular dynamics simulation

In 1949, Tolman found the relation between the surface tension and Tolman length, which determines the dimensional effect of the surface tension. Tolman length is the difference between the equimolar surface and the surface of tension. In recent years, the magnitude, expression, and sign of the Tolman length remain an open question. An incompressible and homogeneous liquid droplet model is proposed and the approximate expression and sign for Tolman length are derived in this paper. We obtain the relation between Tolman length and the radius of the surface of tension(R_s) and found that they increase with the Rs decreasing. The Tolman length of plane surface tends to zero. Taking argon for example, molecular dynamics simulation is carried out by using the Lennard–Jones(LJ) potential between atoms at a temperature of 90 K. Five simulated systems are used, with numbers of argon atoms being 10140, 10935, 11760, 13500, and 15360, respectively. By methods of theoretical study and molecular dynamics simulation, we find that the calculated value of Tolman length is more than zero, and it decreases as the size is increased among the whole size range. The value of surface tension increases with the radius of the surface of tension increasing, which is consistent with Tolman’s theory. These conclusions are significant for studying the size dependence of the surface tension.     

过渡金属催化醇与胺有氧脱水反应及相关研究进展

与其他胺和酰胺衍生物的合成方法相比,过渡金属催化醇与各类胺和酰胺的脱水N-烷基化反应是一种相对绿色、原子经济性较高的方法,一般被称为"借氢"或"氢自动转移"反应及其方法学.近年来,在空气氛围下过渡金属催化醇与胺和酰胺的有氧脱水N-烷基化反应,可使用更稳定的金属催化剂、可在无配体、空气等更温和简单的条件下进行,也引起了人们的极大关注.主要介绍近年来过渡金属催化下醇与胺和酰胺在空气或者氧化剂作用下构建C—N,C=N键合成胺和酰胺衍生物以及亚胺类化合物的有氧脱水反应进展情况,同时也对相关有氧脱水C-烷基化反应进行简单介绍.相关反应的机理研究也将作适当讨论.     

Oxygen vacancy control of electrical,optical, and magnetic properties of Fe0.05Ti0.95O2 epitaxial films

High-quality Fe-doped TiO₂ films are epitaxially grown on MgF₂ substrates by pulsed laser deposition. The x-ray diffraction and Raman spectra prove that they are of pure rutile phase. High-resolution transmission electron microscopy (TEM) further demonstrates that the epitaxial relationship between rutile-phased TiO₂ and MgF₂ substrates is 110 TiO₂₂. The room temperature ferromagnetism is detected by alternative gradient magnetometer. By increasing the ambient oxygen pressure, magnetization shows that it decreases monotonically while absorption edge shows a red shift. The transport property measurement demonstrates a strong correlation between magnetization and carrier concentration. The influence of ambient oxygen pressure on magnetization can be well explained by a modified bound magnetization polarization model.     

HL-2M 主机抗扭转支撑结构计算分析

根据通电的环向场(TF)线圈在磁场作用下将产生侧向力和径向力,提出了抗扭转支撑结构方案。该方案能够降低这两种力对 TF 线圈的影响,并且保证线圈连接面的紧密接触和绝缘层不会发生相对错动。对抗扭转支撑结构进行计算分析,确定该结构的受力方式以及传力路径。结果表明,在实验运行以及极端工况下结构的应力、位移能够到达设计要求,通过疲劳计算得出抗扭转支撑结构能满足 20 年以上的实验运行,能够保证 HL-2M装置安全、平稳和可靠的运行。