(七) 复数

[分析] |z|=2的图形是个圆,|z＇ i|=2的图形也是一个圆。问题化为求后一个圆上离原点最远的点的距离。     

多面体与旋转体(选择题五道)

1.四个命题:长方体是①直棱柱,②正棱柱,③四棱柱,④平行六面体.其中真命题的个数是 (A)1(B)2(C)3(D)4 2.正方体月C,的全面积为S,又L,M,N分别是它的三条棱AB、AD、AA,的三个内点,过这三点的平面截去正方体的一角之后的多面体的全面积设作S。,则 (A)S>S。(B)S相似文献   

KNbO3：Fe晶体的时间微分效应及图像追踪

本文观察到了KNbO_3:Fe晶体的时间微分效应,并用这个微分效应进行了图像追踪的演示,为KNbO_3:Fe晶体在光折变器件领域的应用进行了有益的探索。     

“排列与组合”题卡

“排列与组合”题卡笑文［题］把ｎ＋１件奖品分给ｎ个优胜者，每人至少一件，则分配方法数为（Ａ）（Ｂ）ｎ（ｎ＋１）！（Ｃ）（ｎ＋１）！（Ｄ）ｎ！［分析］考虑把ｎ＋１件奖品先分成ｎ份，然后再分给ｎ个优胜者［主解］第一步，从ｎ＋１件奖品中任取两件，并成１份，...     

精制废木屑热解油/柴油新型混合燃料制备实验研究

为提高废木屑热解油品质,使其能够作为发动机燃料使用,提出了一条新的热解油提质路线。首先将热解原油进行基于组分分离的乙醚萃取和化学催化相结合的精制过程,得到精制热解油;其次,利用超声反应器制备了精制热解油/柴油新型混合燃料,以单位体积柴油所溶解的精制油的体积定为S值,作为判断乳化效果的准则,考察了不同的影响因素对S值的影响。研究结果表明,乳化剂添加量对S值影响较大,在V_{精制生物油}:V_柴油:V_乳化剂=10:30:5条件下,存在最佳的乳化超声操作条件:超声时间、超声电功率、乳化温度分别为20 min、540 W、50℃。制备了不同S值的乳化燃料,通过对燃料物理指标的分析发现,该燃料性质稳定、燃烧性能优良,有望成为柴油的替代产品。     

POLYURETHANE-POLYSTYRENE INTERPENETRATING NETWORKS

A series of polyurethane based on liquid chloroprene-hydroxyethyl methacrylate copolymer(CP-co-HEMA)-polystyrene (PS) interpenetrating polymer networks (PU-PS IPN) were synthe-sized. Some physical properties were examined and density behavior was investigated. In 60%polyurethane (PU) system, the tensile strength and density increased greatly. Transmission electronmicrographs showed that the phase separation existed and the sizes of PS domains dispersed in PUphase were about 500-4,000 A. In comparison with correlative PU-PMMA IPN system, whichhas the higher compatibility, this system showed an extensive phase separation and clear boundaries.There was no phase inversion observed even for 60% PU system in which PS was still the dispersed phaseand PU the continuous phase. This was due to the relatively faster rate of formation of PU than thatof ST polymerization.     

LIQUID CHLOROPRENE-HYDROXYETHYL METHACRYLATE COPOLYMER MODIFIED EPOXY RESIN Ⅱ. N, N-DIMETHYL BENZYL AMINE CURING SYSTEM

A series of liquid chloroprene-hydroxyethyl methacrylate copolymer (CP-HEMA) modifiedepoxy resin were prepared. The effects of CP-HEMA content, curing conditions on physical pro-perties of the modified system were examined. With IR and Viscoelastocuremeter, the curing reactionrate was determined and the mechanism of the curing reaction was discussed. The effects of CP-HEMA content and curing conditions on morphology were mainly observed by scanning electronmicroscopy.     

修饰剂结构对桥氧双核锰2，2＇－联吡啶配合物电化学的影响

修饰剂结构对桥氧双核锰２，２＇－联吡啶配合物电化学的影响吴丛笑，郑军伟，陆天虹（中国科学院长春应用化学研究所电分析化学开放实验室，长春，１３００２２）关键词桥氧双核锰２，２＇－联吡啶配合物，烟酸，异烟酸，２－羧酸吡啶锰酶在生物体系中作为一类重要的氧化...     

拉曼光谱研究聚噻吩微米/纳米管

分别具有 2 0 0nm和 2 0nm管径的聚噻吩微米 /纳米管通过用微孔氧化铝过滤膜作为模板在三氟化硼乙醚溶液中电解聚合噻吩制得。在一张厚度约为 2 0nm的金箔上这些具有单分散长度的微米管能很好平行站立起来形成阵列 ,而纳米管则相互粘附不能形成很好的阵列。用 6 3 3nm激发的拉曼光谱研究表明 :微米管具有较高的掺杂程度 ,而纳米管的掺杂程度很低。这主要是由于两种管子的壁厚不同引起的