Wide-viewing-angle switchable image splitter obtained using varied-line-spacing H-PDLC Bragg grating

We propose the use of a varied-line-spacing (VLS) holographic polymer-dispersed liquid crystal (H-PDLC) Bragg grating as a switchable image splitter to generate a compatible three-dimensional (3D) stereogram and to increase the viewing angle of the observer. To fabricate the VLS grating, a cylindrical lens is adopted to form a cylindrical wave, which interferes with a plane wave, generating an H-PDLC grating with a continuously varying period. The proposed holographic optical element (HOE)-based image splitter comprises two VLS H-PDLC gratings. It can be attached on a designed pattern, with two rectangles taking the place of conventional liquid crystal display panel pixels, and can separate them into right and left viewing fields with a wider range. Experimental results show that the movement of the eyes of the observer can reach 37.6 mm. A theoretical simulation indicates that a shorter focal length of the cylindrical lens can yield a larger movement range. Switching between two-dimensional and 3D modes can be performed by applying an external alternating-current voltage at ~80 V. The contrast ratio of the diffracted images induced by crosstalk is greater than 60%, which indicates the feasibility of the proposed HOE for 3D image splitting.     

Regularization of jump points in applying the adaptive spatial resolution technique

The performance of the adaptive spatial resolution technique is improved by making the resolution function of the coordinate transformation as smooth as possible. To this end, the smoothness of the resolution function is probed and a quantitative criterion is proposed to make the jump points; which were conventionally equidistant from each other, regularized. The here-proposed regularization is applied to two different recent formulations and its effects on the overall convergence rate and on the presence of numerical artifacts in analysis of highly conducting gratings are studied. Dielectric and metallic gratings at optical and microwave frequencies are considered and the helpfulness of the proposed technique is discussed.     

Optical transmission gratings by one driven three-level atom and a microtoroidal resonator

Based on the strong coherent interaction between a three-level ladder-type atom and a fiber-taper-coupled microtoroidal resonator, we present a scheme for optical transmission gratings. Using experimentally accessible parameters, it is shown that alternating regions of high transmission and absorption can be created in the fiber-taper channel by spatially modulating an external coupling field. The model shows an obvious effect which has a direct analogy with the phenomenon of electromagnetically induced grating (EIG) in quantum systems.     

Control of resonant peak depths of tunable long-period fiber gratings using overcoupling

We present a method to reduce changes in the resonant peak depth of a long-period fiber grating (LPFG) as the resonant band is tuned by varying the external refractive index. We theoretically analyze the effects of the initial coupling strength on the peak depth change as external refractive index is varied. By controlling the initial coupling strength, it is experimentally demonstrated that an optimum peak depth can be obtained over a range of operating wavelengths that will maximize the sensitivity and stability of LPFG based sensors and tunable filters.     

Controlling of symmetric and asymmetric mode coupling in long-period fiber gratings singe-side induced by long-pulse CO2 laser

We report a simple fabricating approach to control the mode couplings in long-period fiber gratings (LPFGs) through side exposing fiber to long-pulse-10.6-μm laser from a cheap, internally modulated CO₂ tube. By tuning focused-spot size on fibers, not only circularly symmetric mode coupling but also asymmetric mode couplings can be effectively achieved. Simulation of mode profiles in grating cross-section with Finite Element Method (FEM), and LPFG-cladding etching experiment with hydrofluoric acid (HF), support our explanation that asymmetric mode coupling in LPFGs depends on local refractive-index (RI) change within an azimuthally thin cladding layer, resulted from large-spot method induced deep melt flow on fiber surface during CO₂ laser irradiation.     

Simultaneous measurement of curvature and temperature based on PCF-based interferometer and fiber Bragg grating

A sensor head consisting of a photonic crystal fiber (PCF)-based Mach-Zehnder interferometer (MZI) and a fiber Bragg grating (FBG) is proposed and experimentally demonstrated for simultaneous measurement of curvature and temperature. The MZI fabricated by splicing a short length of PCF between two single-mode fibers with the air-hole structure that completely collapsed near the splicing points, is sensitive to fiber bending and surrounding temperature, while the FBG is only sensitive to the later. Simultaneous measurement of curvature and temperature is therefore obtained. Sensitivities of 4.06 nm/m^− 1 and 6.30 pm/°C are achieved experimentally for curvature and temperature, respectively. And the corresponding resolutions are 5.2 × 10^− 4 m^− 1 and 1.25 °C for curvature and temperature, respectively, based on the wavelength measurement resolution of 10 pm.     

一维金属光栅的光学反射吸收

利用RCWA(rigid coupled-wave analysis)方法研究了一维金属光栅的反射特性,考察了 瑞利反常、表面等离激元驻波共振和几何共振三种共振吸收机理,分析了这三种机理的相互作用,如表面等离激元驻波共振和几何共振可以形成混合模式. 在反射式复合金属光栅中,确认了第四种共振形式,即相位共振. 数值计算表明相位共振对光学吸收的影响有两种形式: 当光栅周期大于一个波长时,相位共振导致尖锐的吸收峰,峰位在几何共振吸收峰一侧;当光栅周期小于一个波长时,相位共振导致混合模式的共振吸收峰发生劈裂. 对一维金属光栅反射特性的研究增加了对金属光栅共振吸收模式及其相互作用的认识. 关键词： 一维金属光栅 瑞利反常 表面等离激元 相位共振     

Chirped fibre Bragg grating based multiplexer and demultiplexer for DWDM applications

A multiplexer/demultiplexer for 100 GHz channel spacing based on chirped fibre Bragg gratings with different bandwidths and optical circulators is presented. The spectral characteristics, specifications and operation of these passive devices are described, showing its potential use in dense wavelength division multiplexing (DWDM) applications.     

Variable Wavelengths Fiber Bragg Gratings Written with A Phase Mask and Four Prisms

Using only one diffractive element, the Talbot interferometer provides a robust and inherently stable method for reproducing fiber Bragg gratings with variable wavelengths, and reduces the complexity of the fiber grating fabrication system. However, the usable length of the grating is limited by the practical length of the mirrors. This paper presents a phase mask with two fixed prisms and two rotational prisms to inscribe fiber Bragg gratings with variable Bragg wavelengths. In this system, the fiber Bragg grating is inscribed by UV interference stripes of 193 nm derived from two rotational prisms and two fixed prisms, where phase mask is used as a beam splitter of ±1 order diffraction light. It is noteworthy that the tunable phase mask interferometer decreases the demand of the length of prism evidently.     

Electrochemical Deposition of Azobenzene‐Containing Network Films with High‐Contrast and Stable Photoresponse

To fabricate stable photoresponsive films and devices, a cross‐linked network that firmly fixes the position of the chromophores is an ideal structure, because aggregation and/or phase separation effects of chromophores in matrix can be effectively restrained in such robust films. Herein, the in situ electrochemical deposition (ED) of azo‐based precursors containing multielectroactive carbazole units is utilized to construct highly cross‐linked photoresponsive films. 2‐(4‐(9,9‐bis(6‐(9H‐carbazol‐9‐yl)hexyl)‐9H‐fluoren‐2‐yl)phenyl)‐1‐(4‐(9,9‐bis(6‐(9H‐carbazol‐9‐yl)hexyl)‐9H‐fluoren‐7‐yl)phenyl)diazene (BFCzAzo) with high solvability in electrolyte solution, high electroactivity, and highly efficient photoresponsive ability is synthesized by Suzuki coupling reaction as a kind of ED precursor. A highly cross‐linked photoresponsive film is fabricated by ED method using BFCzAzo as ED precursor. The film can be patterned in large area by irradiation with interfering laser beam (355 nm), and the pattern possesses excellent thermal stability and insoluble ability in both organic and inorganic solvents. Excellent reversibility of the nanostructures is demonstrated by irradiation with 550 nm laser beam.