Efficient post-plasma catalytic degradation of toluene via series of Co–Cu/TiO2 catalysts

Research on Chemical Intermediates - Volatile organic compounds (VOCs) represent a very important class of pollutants that causes serious health effects. There is an urgent requirement to establish...     

Recent developments and comparison of transformation strategies for organic halides to aldehydes and ketones

Molecular Diversity - Aldehydes and ketones are parts of millions of compounds and are important classes of chemicals which serve as important precursors for the synthesis of library of compounds....     

Ceramic fuel cells using novel proton-conducting BaCe0.5Zr0.3Y0.1Yb0.05Zn0.05O3-δ electrolyte

Journal of Solid State Electrochemistry - Protonic ceramic fuel cells have become extremely interesting due to their high power output at the intermediate temperature range...     

Honey mediated microwave assisted sol–gel synthesis of stabilized zirconia nanofibers

Aim of the present work is to prepare zirconia nanofibers using microwave assisted sol–gel method. Both honey and microwave powers are employed as structure directing agents to improve the stability and reduce the crystallite size. Honey, acting as capping agent, prevents the particles from hard agglomeration. Soft agglomeration or less agglomeration results in smaller crystallite size that prevents the transformation of tetragonal to monoclinic phase resulting in stabilized tetragonal zirconia (t-ZrO₂). Zirconium oxychloride is used as precursor of zirconium and deionized water as solvent. Effect of microwave powers, in the range of 100–900?W with interval of 200?W, on zirconia stabilization is observed. X-ray diffraction analysis shows the presence of phase pure t-ZrO₂ at low microwave power ~?100?W with crystallite size ~?26?nm. Formation of phase pure t-ZrO₂ at low microwave power is due to the presence of sufficient amount of honey to coat the zirconia crystals. Relatively higher x-ray density has been observed in case of phase pure t-ZrO₂ at 100?W of microwave power. This high density and phase purity reveals the high value of hardness (~?1503?HV). Scanning electron microscopy analysis reveals the formation of well-separated nanofibers without agglomeration at 100?W. These nanofibers are purposed for bone implants and bone grafting. Structural transformation along with hard agglomeration is observed with increase in microwave powers from 500?W to 900?W. FTIR and Raman fundamental tetragonal bands, appearing at 490?cm^?1 and 148?cm^?1, respectively, confirm the formation of t-ZrO₂ at low microwave power. Sample with phase purity exhibits high grain boundary resistance (1.95?MΩ) along with high dielectric constant (~?74) and low tangent loss (at log f?=?4.0). It is worth mentioning here that phase pure t-ZrO₂ at very low microwave power (~100?W) with high density and well-separated nanofibers has been obtained without any post heat treatment.

Open image in new window

     

Discriminating three biothiols by using one fluorescent probe

A 1,1′-bi-2-naphthol (BINOL) based dialdehyde (R)-1 is found to exhibit selective fluorescent response towards cellular thiols, _l-Cys, _l-Hcy, and GSH. (R)-1 reacts with _l-Trp to form a Schiff base 2 which quenches the emission of _l-Trp at λ?=?340. Coordination of 2 with Zn(ll) leads to greatly enhanced emission at λ?=?530?nm. When the in situ generated 2 from the combination of the solution of (R)-1 (1.0?×?10^?5?M)?+?Trp (2?equiv) +Zn(OAc)₂ (2 equiv) is treated with _l-Cys, _l-Hcy, and GSH, different fluorescent responses at three emission wavelengths, including 340, 421 and 530?nm, are observed. This allows the in situ generated 2 to be used as a ratiometric fluorescent probe to discriminate these three biothiols. NMR study of (R)-1 with _D- or _l-Cys in the presence of Zn(II) shows that the unique reactivity of Cys provides basis for the selective ratiometric fluorescent response. (R)-1?+?Zn(II) also exhibits enantioselective fluorescent response toward _D- and _l-Cys.     

Improved cell viability and hydroxyapatite growth on nitrogen ion-implanted surfaces

Stainless steel 306 is implanted with various doses of nitrogen ions using a 2?MV pelletron accelerator for the improvement of its surface biomedical properties. Raman spectroscopy reveals incubation of hydroxyapatite (HA) on all the samples and it is found that the growth of incubated HA is greater in higher ion dose samples. SEM profiles depict uniform growth and greater spread of HA with higher ion implantation. Human oral fibroblast response is also found consistent with Raman spectroscopy and SEM results; the cell viability is found maximum in samples treated with the highest (more than 300%) dose. XRD profiles signified greater peak intensity of HA with ion implantation; a contact angle study revealed hydrophilic behavior of all the samples but the treated samples were found to be lesser hydrophilic compared to the control samples. Nitrogen implantation yields greater bioactivity, improved surface affinity for HA incubation and improved hardness of the surface.     

Magnetic Behaviour of Sm2Co7/Fe/Sm2 Co7, Nanocomposite Trilayers with Cr and Ti Additions

Trilayered Sm2Co7/Fe/Sm2Co7 spring exchange magnets are fabricated by dc magnetron sputtering on MgO substrates. Very thin layers （0.3-0.7 nm） of Cr and Ti are added at the interfaces of the two magnetic phases. The thickness of StucCo7 is kept at 20nm and Fe at 6nm while the thickness of Cr and Ti are varied as 0.3, 0.5, and 0.7nm. The base pressure of sputtering chamber is kept below 10^-7 Torr and Ar pressure at 3-8m Torr. The samples are characterized by x-ray diffraction （XRD） and SQUID magnetometer. We report improvement in exchange coupling of nonacomposite magnets by addition of thin layers of Cr at interfaces.     

On stagnation point flow of Sisko fluid over a stretching sheet

The steady two-dimensional stagnation-point flow, represented by Sisko fluid constitutive model, over a stretching sheet is investigated theoretically. Using suitable similarity transformations, the governing boundary-layer equations are transformed into the self-similar non-linear ordinary differential equation. The transformed equation is then solved using a very efficient analytic technique namely the homotopy analysis method (HAM) and the HAM solutions are validated by the exact analytic solutions obtain in certain special cases. The influence of the power-law index (n), the material parameter (A) and the velocity ratio parameter (d/c) on the flow characteristics is studied and presented through several graphs. In addition, the local skin friction coefficient for several values of these parameters is tabulated and examined. The similarity solutions for both the Newtonian and the power-law fluids are presented as special cases of the analysis. The results obtained reveal that, in comparison with the Newtonian and the power-law fluids, the velocity profiles of the Sisko fluid are much faster (slower), for d/c<1 (d/c>1), respectively.     

Fission studies of gold induced by (1665 MeV) π- using a CR-39 detector

The fission cross section and fission probability of ¹⁹⁷Au, induced by (1665 MeV) π^-, have been studied using CR-39 track detectors. A 4π-geometry was used to count track statistics. A beam of negative pions of 1665 MeV was produced at AGS of Brookhaven National Laboratory, USA, and allowed to fall normally on the stack. Two detectors from the stack were scanned for fission fragment tracks after etching in 6N NaOH at 70℃. The statistics of fission fragment tracks in both detectors were obtained. It was found that there was a marked asymmetry of registered tracks with respect to the forward and backward hemispheres. This asymmetry could be partly accounted for on the basis of momentum transfer to the struck nucleus. On the basis of counting statistics fission cross section was measured, and fission probability was determined by dividing the fission cross section with the reaction cross section. The fission cross-section and fission probability were compared with the computed values using the cascade-exciton model code CEM95.     

Effects of thermal fluctuations on non-minimal regular magnetic black hole

We analyze the effects of thermal fluctuations on a regular black hole (RBH) of the non-minimal Einstein–Yang–Mill theory with gauge field of magnetic Wu–Yang type and a cosmological constant. We consider the logarithmic corrected entropy in order to analyze the thermal fluctuations corresponding to non-minimal RBH thermodynamics. In this scenario, we develop various important thermodynamical quantities, such as entropy, pressure, specific heats, Gibb’s free energy and Helmholtz free energy. We investigate the first law of thermodynamics in the presence of logarithmic corrected entropy and non-minimal RBH. We also discuss the stability of this RBH using various frameworks such as the \(\gamma \) factor (the ratio of heat capacities), phase transition, grand canonical ensemble and canonical ensemble. It is observed that the non-minimal RBH becomes globally and locally more stable if we increase the value of the cosmological constant.