MoO_3、NiO、ZnO在小表面金红石上的分散行为

氧化物、盐类在氧化物载体表面的自发分散是一种广泛存在的现象，文献中已报导过大量氧化物和盐类在高比表面载体上分散的研究结果［'－3］TIO。作为一种较新型的载体，与Y－AI。O。、硅胶等传统载体相比，有许多不同特性．活性组分在TIO。表面的分散状态及所得催化剂的性能已有不少报导［'－'］，但所用的TIOZ主要是较高比表面的锐钛矿型TIOZ（刘金红石型TIO。（r）和锐钛矿型TIOZ（a）的结构不同，它是高温生成相，比表面较小［'］．氧化物在金红石上的分散行为仍未见报导．我们制备了三种具有不同比表面的TIO水），系统地研…     

堇青石窑具多晶结构与性能研究

利用X-射线衍射分析和电子显微镜分析的结果，确定堇青石窑具的多晶结构和各晶相的含量；结合窑具性能的研究，确定堇青石窑具具有优良性能的适宜配方。     

A mesoporous template route to the low-temperature preparation of efficient green light emitting Zn2SiO4:Mn phosphors

Green light emitting Zn2SiO4:Mn phosphors have been prepared via a low-temperature solid-state reaction using mesoporous silica SBA-15 template. This mesoporous silica template method features low-temperature formation of phosphors and easy doping. The structure and morphology of the phosphors were characterized by XRD, SEM, TEM, and N2 adsorption/desorption techniques, which confirmed the single crystallinity, ordered mesostructure, closed pore channels, and elongated ropelike morphology. The luminescent properties were examined by photoluminescence spectroscopy at room temperature, and the results of fluorescence decay time measurements show non-single-exponential decay behavior and a decrease of the decay time with an increase of the Mn concentration.     

Phase diagrams of binary systems of alkylammonium tetrachlorometallates(II)

The phase diagrams of four binary systems (C₁₀H₂₁NH₃)₂CoCl₄?(C₁₆H₃₃NH₃)₂CoCl₄, (C₁₂H₂₅NH₃)₂CoCl₄?(C₁₆H₃₃NH₃)₂CoCl₄, (C₁₀H₂₁NH₃)₂ZnCl₄?(C₁₆H₃₃NH₃)₂ZnCl₄ and (C₁₂H₂₅NH₃)₂ZnCl₄?(C₁₆H₃₃NH₃)₂ZnCl₄ were investigated by means of DSC. These six compounds and their binary mixtures can retain energies between 74 and 115 J/g during solid-state transformations at temperatures between 70 and 105°C, and they are therefore being considered for potential use in solar energy systems.     

Cation-pi interactions with a model for the side chain of tryptophan: structures and absolute binding energies of alkali metal cation-indole complexes

Threshold collision-induced dissociation techniques are employed to determine bond dissociation energies (BDEs) of mono- and bis-complexes of alkali metal cations, Li+, Na+, K+, Rb+, and Cs+, with indole, C8H7N. The primary and lowest energy dissociation pathway in all cases is endothermic loss of an intact indole ligand. Sequential loss of a second indole ligand is observed at elevated energies for the bis-complexes. Density functional theory calculations at the B3LYP/6-31G level of theory are used to determine the structures, vibrational frequencies, and rotational constants of these complexes. Theoretical BDEs are determined from single point energy calculations at the MP2(full)/6-311+G(2d,2p) level using the B3LYP/6-31G* geometries. The agreement between theory and experiment is very good for all complexes except Li+ (C8H7N), where theory underestimates the strength of the binding. The trends in the BDEs of these alkali metal cation-indole complexes are compared with the analogous benzene and naphthalene complexes to examine the influence of the extended pi network and heteroatom on the strength of the cation-pi interaction. The Na+ and K+ binding affinities of benzene, phenol, and indole are also compared to those of the aromatic amino acids, phenylalanine, tyrosine, and tryptophan to elucidate the factors that contribute to the binding in complexes to the aromatic amino acids. The nature of the binding and trends in the BDEs of cation-pi complexes between alkali metal cations and benzene, phenol, and indole are examined to help understand nature's preference for engaging tryptophan over phenylalanine and tyrosine in cation-pi interactions in biological systems.     

Construction of recombinant Bacillus subtilis for production of polyhydroxyalkanoates

Polyhydroxyalkanoates (PHAs) are polyesters of hydroxyalkanoates synthesized by numerous bacteria as intracellular carbon and energy storage compounds and accumulated as granules in the cytoplasm of cells. In this work, we constructed two recombinant plasmids, pBE2C1, and pBE2C1AB, containing one or two PHA synthse, genes, respectively. The two plasmids were inserted into Bacillus subtilis DB104 to generate modified strains, B. subtilis/pBE2C1 and B. subtilis/pBE2C1AB. The two recombinants strains were subjected to fermentation and showed PHA accumulation, the first reported example of mcl-PHA production in B. subtilis. Gas Chromatography analysis identified the compound produced by B. subtilis/pBE2C1 to be a hydroxydecanoate-co-hydroxydodecanoate (HD-co-HDD) polymer whereas that produced by B. subtilis/pBE2C1AB was a hydroxybutyrate-co-hydroxyde-canoate-co-hydroxydodecanoate (HB-HD-HDD) polymer.     

A new veratramine alkaloid from the bulbs of Fritillaria hupehensis

A new highly conjugated alkaloid of veratramine type, 225,25S,5α-veratramine-7(8),12(14)-diene-3β,13β,23β-triol-6-one (1), was isolated from the bulbs of Fritillaria hupehensis Hsiao et K.C. Hsia. Its structure was determined on the basis of spectroscopic evidences.     

无烟煤结构的高分辨电镜研究

镜质组不仅是煤结构变化最具规律性，也是影响煤质的主要微成分。用点分辨率为２．１Ａ的高分辨电镜对几种不同煤化程度的无烟煤大分子结构进行了研究。结果表明：电镜图像直接表征了无烟煤分子的非均匀性孔隙结构。京西煤分子方向化程度强，主要以芳层平行堆或有序化前结构为主；晋城煤方向化程度弱，主要以粒状嵌晶结构为主。高分辨电镜技术是研究煤分子结构和煤化作用实质的有效方法。     

GMA熔融接枝EPDM的研究

以甲基丙烯酸缩水甘油酯（ＧＭＡ）为接枝单体，过氧化二异丙苯（ＤＣＰ）为引发剂，对三元乙丙胶（ＥＰＤＭ）进行了熔融接枝，在烃链上引入极性基团，以改善ＥＰＤＭ与极性聚合物的相容性。用差示扫描量热计（ＤＳＣ）研究了ＧＭＡ的聚合温度，用富里叶红外（ＦＴ－ＩＲ）、凝胶渗透色谱（ＧＰＣ）对接枝产物进行了表征。实验结果表明，产物的接枝率和凝胶量可以通过反应条件（温度、时间、反应物组成及加料方式）来控制。     

Liquefaction of corn stover and preparation of polyester from the liquefied polyol

This research investigated a novel process to prepare polyester from corn stover through liquefaction and crosslinking processes. First, corn stover was liquefied in organic solvents (90 wt% ethylene glycol and 10 wt% ethylene carbonate) with catalysts at moderate temperature under atmospheric pressure. The effect of liquefaction temperature, biomass content, and type of catalyst, such H₂SO₄, HCl, H₃PO₄, and ZnCl₂, was evaluated. Higher liquefaction yield was achieved in 2 wt% sulfuric acid, 1/4 (w/w) stover to liquefying reagent ratio; 160°C temperature, in 2h. The liquefied corn stover was rich in polyols, which can be directly used as feedstock for making polymers without further separation or purification. Second, polyester was made from the liquefied corn stover by crosslinking with multifunctional carboxylic acids and/or cyclic acid anhydrides. The tensile strength of polyester is about 5 MPa and the elongation is around 35%. The polyester is stable in cold water and organic solvents and readily biodegradable as indicated by 82% weight loss when buried in damp soil for 10 mo. The results indicate that this novel polyester could be used for the biodegradable garden mulch film production.