Quantitative Nanoscale Secondary Ion Mass Spectrometry (NanoSIMS) Imaging of Individual Vesicles to Investigate the Relation between Fraction of Chemical Release and Vesicle Size

We used correlative transmission electron microscopy (TEM) and nanoscale secondary ion mass spectrometry (NanoSIMS) imaging to quantify the contents of subvesicular compartments, and to measure the partial release fraction of ¹³C-dopamine in cellular nanovesicles as a function of size. Three modes of exocytosis comprise full release, kiss-and-run, and partial release. The latter has been subject to scientific debate, despite a growing amount of supporting literature. We tailored culturing procedures to alter vesicle size and definitively show no size correlation with the fraction of partial release. In NanoSIMS images, vesicle content was indicated by the presence of isotopic dopamine, while vesicles which underwent partial release were identified by the presence of an ¹²⁷I-labelled drug, to which they were exposed during exocytosis allowing entry into the open vesicle prior to its closing again. Demonstration of similar partial release fractions indicates that this mode of exocytosis is predominant across a wide range of vesicle sizes.     

Ortho-Alkoxy-benzamide Directed Formation of a Single Crystalline Hydrogen-bonded Crosslinked Organic Framework and Its Boron Trifluoride Uptake and Catalysis

Boron trifluoride (BF₃) is a highly corrosive gas widely used in industry. Confining BF₃ in porous materials ensures safe and convenient handling and prevents its degradation. Hence, it is highly desired to develop porous materials with high adsorption capacity, high stability, and resistance to BF₃ corrosion. Herein, we designed and synthesized a Lewis basic single-crystalline hydrogen-bond crosslinked organic framework (H_COF-50) for BF₃ storage and its application in catalysis. Specifically, we introduced self-complementary ortho-alkoxy-benzamide hydrogen-bonding moieties to direct the formation of highly organized hydrogen-bonded networks, which were subsequently photo-crosslinked to generate H_COFs. The H_COF-50 features Lewis basic thioether linkages and electron-rich pore surfaces for BF₃ uptake. As a result, H_COF-50 shows a record-high 14.2 mmol/g BF₃ uptake capacity. The BF₃ uptake in H_COF-50 is reversible, leading to the slow release of BF₃. We leveraged this property to reduce the undesirable chain transfer and termination in the cationic polymerization of vinyl ethers. Polymers with higher molecular weights and lower polydispersity were generated compared to those synthesized using BF₃ ⋅ Et₂O. The elucidation of the structure–property relationship, as provided by the single-crystal X-ray structures, combined with the high BF₃ uptake capacity and controlled sorption, highlights the molecular understanding of framework-guest interactions in addressing contemporary challenges.     

Scheduling jobs with release dates on parallel batch processing machines

In this paper we consider the problem of scheduling jobs with release dates on parallel unbounded batch processing machines to minimize the maximum lateness. We show that the case where the jobs have deadlines is strongly NP-hard. We develop a polynomial-time approximation scheme for the problem to minimize the maximum delivery completion time, which is equivalent to minimizing the maximum lateness from the optimization viewpoint.     

剥离-共组装法制备葫芦素插层类水滑石纳米杂化物

采用剥离-共组装法制备了电中性疏水药物葫芦素(CA)插层类水滑石(HTlc)纳米杂化物. 先用胆酸钠(Ch)包覆修饰葫芦素, 再与剥离的HTlc薄片共组装, 形成CA-Ch-HTlc纳米杂化物. 采用小角X射线散射、 傅里叶变换红外吸收光谱、 透射和扫描电子显微镜、 Zeta电位和元素分析等技术对样品进行了表征. 所制备纳米杂化物的载药量达到7.06%, 表明该方法可以实现电中性疏水药物在HTlc上的有效负载. 依据胆酸离子和葫芦素尺寸及纳米杂化物通道高度推测, 胆酸离子在HTlc层间为双层排列, 其长轴几乎垂直于HTlc层板; 葫芦素分子插入(或“溶入”)胆酸离子双层中. CA-Ch-HTlc纳米杂化物具有良好的药物缓释效果, 其药物释放过程符合准二级动力学方程.     

Poly(ethylene oxide)-poly(styrene oxide)-poly(ethylene oxide) copolymers: Micellization, drug solubilization, and gelling features

Two new poly(ethylene oxide)-poly(styrene oxide) triblock copolymers (PEO-PSO-PEO) with optimized block lengths selected on the basis of previous studies were synthesized with the aim of achieving a maximal solubilization ability and a suitable sustained release, while keeping very low material expense and excellent aqueous copolymer solubility. The self-assembling and gelling properties of these copolymers were characterized by means of light scattering, fluorescence spectroscopy, transmission electron microscopy, and rheometry. Both copolymers formed spherical micelles (12-14 nm) at very low concentrations. At larger concentration (>25 wt%), copolymer solutions showed a rich phase behavior, with the appearance of two types of rheologically active (more viscous) fluids and of physical gels depending on solution temperature and concentration. The copolymer behaved notably different despite their relatively similar block lengths. The ability of the polymeric micellar solutions to solubilize the antifungal drug griseofulvin was evaluated and compared to that reported for other structurally-related block copolymers. Drug solubilization values up to 55 mg g⁻¹ were achieved, which are greater than those obtained by previously analyzed poly(ethylene oxide)-poly(styrene oxide), poly(ethylene oxide)-poly(butylene oxide), and poly(ethylene oxide)-poly(propylene oxide) block copolymers. The results indicate that the selected SO/EO ratio and copolymer block lengths were optimal for simultaneously achieving low critical micelle concentrations (cmc) values and large drug encapsulation ability. The amount of drug released from the polymeric micelles was larger at pH 7.4 than at acidic conditions, although still sustained over 1 day.     

Application of Short Sequential Extraction Procedure（SSEP） for the Determination of Zn, Cu, and Cd Contents in Riverbed Sludge in Hejiagou, Harbin, China

IntroductionThe environment is contaminated by high concen-trations of metals from different sources such as conta-minated soils[1—10], sediments[11—15], and sewage orindustrial sludge[16—20]. However, there has been noreport on the determination of he…     

STRUCTURAL CHANGES AND RELEASE CHARACTERISTICS OF CROSSLINKED CHITOSAN BEADS IN RESPONSE TO SOLUTION pH

The present investigation describes a novel method for preparing beads based on crosslinked chitosan with glutaraldehyde interpenetrating glycine polymer network. Four type of beads, viz., CHI1 (composed of chitosan, glycine and glutaraldehyde); CHI2 (composed of chitosan and glutaraldehyde); CHI3 (composed of chitosan and glycine) and CHI4 (only chitosan) were prepared and their release characteristics were studied using thyamine hydrochloride (Thy-HCl) as a model drug. Structural changes during swelling of CHI1 beads in solutions of different pH were studied using IR and UV spectroscopy.     

Release kinetics of (−)-menthol from chewing gum

The release kinetics of (−)-menthol from chewing gum was investigated using various encapsulated powder of (−)-menthol. The apparatus of flavor release of chewing gum was made with a glass container of mashing homogenizer. Flavor release behavior could be correlated with Avrami’s equation. Chewing gum containing (−)-menthol/γ-CD complex powder had longer retention of (−)-menthol compared with the β-CD complex powder and the (−)-menthol encapsulated in modified starches. The activation energies of (−)-menthol release from chewing gum were 106 kJ/mol for γ-CD complex and 74 kJ/mol for (−)-menthol/β-CD complex powder and emulsified (−)-menthol encapsulated in HI-CAP, respectively.     

聚(ε-己内酯)-多肽共聚物胶束增强抗生素的抗菌活性

Bacterial infection is a major threat to human health, and can cause several diseases including gastroenteritis, influenza, tetanus, and tuberculosis. As conventional antibiotic treatment may cause various undesirable effects such as stomach disorder and bacterial resistance, it is necessary to improve the antibacterial efficiency of antibiotics. Here, we synthesized a peptide-based copolymer, poly(ε-caprolactone)-block-poly(glutamic acid)-block-poly(lysine-stat-phenylalanine)[PCL₃₄-b-PGA₃₀-b-P(Lys₁₆-stat-Phe₁₂)] by ring-opening polymerization (ROP) of ε-caprolactone and amino acid N-carboxyanhydride (NCA). Successful synthesis of the copolymer was verified by proton nuclear magnetic resonance and size exclusion chromatography. This copolymer can self-assemble into negatively charged micelles (-26.7 mV) under alkaline conditions by solvent switch method. The micelle structure was confirmed by transmission electron microscopy and dynamic light scattering, and revealed to have a diameter of ~42 nm. Antibiotics were loaded into micelles during the self-assembly process, and cell viability assay was conducted to evaluate its cytotoxicity with and without tobramycin. No obvious cytotoxicity was observed for both micelles when the concentration was lower than 300 μg·mL^-1. The antibiotic-loaded micelles demonstrated very low minimum inhibitory concentrations (MICs) against both Gram-negative Escherichia coli (E. coli) (7.8 μg·mL^-1) and Gram-positive Staphylococcus aureus (S. aureus) (18.2 μg·mL^-1), while the MICs of free tobramycin were 3.9 and 1.0 μg·mL^-1, respectively. The drug-loading content and efficiency of the micelles were 5.2% and 24.3%, respectively. Therefore, the MICs of the loaded tobramycin against E. coli and S. aureus were 0.4 and 0.9 μg·mL^-1, respectively, suggesting that the micelle could enhance the antibacterial activity of antibiotics. Tobramycin-loaded micelles demonstrated a sustained release characteristic, with 85% of the antibiotics released after 8 h. In bacteria-induced acidic microenvironment, the coil conformation of PGA blocks transforms and PGA blocks shrink toward the micelle core. Concomitantly, the carboxyl side chains are protonated in an acidic environment, increasing the hydrophobicity of this micelle. Antibiotics will be captured when reaching the outer core to slow down the releasing process. Furthermore, the poly(lysine-stat-phenylalanine) [P(Lys-stat-Phe)] coronas with broad spectrum intrinsic antibacterial activity can penetrate the bacterial cell membrane, leading to leakage of the cellular contents of the bacteria and ultimately their death. Due to the sustained release property of micelle and the intrinsic activity of the antibacterial peptide segments, this micelle can greatly enhance the antibacterial activity of antibiotics. Overall, this antibiotic-loaded micelle provides a novel approach for significantly reducing the antibiotics dosage and avoiding the associated health risks.     

pH-Shifting combined with ultrasound treatment of emulsion-filled β-conglycinin gels as β-carotene carriers: Effect of emulsion concentration on gel properties

In this work, emulsion-filled gels were prepared from natural and pH-shifting combined with ultrasound β-conglycinin (7S) as emulsifiers. The emulsifier modification and emulsion concentrations (5, 10, 15, 20 wt%) were evaluated on the structural and β-carotene release properties of the gels. Compared to the 7S hydrogel, the emulsion-filled gels exhibited better water-holding and textural properties. The 7S modification and the increase in emulsion concentration resulted in altered water distribution and improved microstructure and rheological properties of the emulsion-filled gels. The dense and homogeneous gel network was formed at an emulsion content of 15 wt%. The gels were regulated by different release kinetics in a simulated gastrointestinal environment. M−15 showed the highest bioaccessibility and chemical stability (72.25% and 89.87%) with good slow-release properties of β-carotene. These results will guide the development of encapsulated delivery systems for gel food products.