分级结构CdS QDs/BiOCl复合光催化剂的制备及其对有机污染物的降解

采用简单液相沉积法制备了分级结构Cd S QDs/Bi OCl复合光催化剂,以XRD,SEM,TEM,HRTEM,XPS,EDS,UV-Vis DRS,PL等测试方法分别表征了样品的物相、形貌、组成、元素含量、光吸收性能以及光电特性,并以罗丹明B(Rh B)和苯酚为模型污染物,分别在可见光和紫外光下评价Cd S QDs/Bi OCl复合光催化剂的催化性能。测试结果表明,粒径为5.5μm的Bi OCl微球由大量纳米片有序堆积而成,所负载的粒径为10~20 nm的Cd S QDs均匀分布在Bi OCl纳米片表面。与纯Bi OCl和Cd S QDs/Bi OCl相比,Cd S QDs/Bi OCl-3%表现出最佳的光催化性能,其对Rh B和苯酚的降解速率常数分别是纯Bi OCl的2.6倍和5.3倍。Cd S QDs/Bi OCl复合光催化剂性能的提高可归结于,分级结构Bi OCl有效防止了片层堆积,有助于Cd S QDs的负载,另外,Cd S QDs的负载拓展了复合光催化剂的光吸收性能,均匀分布的Cd S QDs与Bi OCl形成的异质结促进了光生电子-空穴对的有效分离。     

电化学法合成BiOCl薄膜及其光催化活性研究

以金属Bi板为阳极,石墨为阴极,NaClO为电解液,在室温下用电化学法一步合成了BiOCl薄膜光催化剂.采用X射线衍射(XRD)、紫外可见漫反射(DRS)、扫描电镜(SEM)、透射电子显微镜(TEM)对其组成、光学特性和形貌进行表征.以500 W氙灯为光源,磺胺甲恶唑为目标降解物,研究了NaClO用量、电解电流大小、EDTA添加量以及电解溶液初始pH不同制备条件下对所得BiOCl薄膜催化活性的影响.结果表明,合成的BiOCl-0薄膜为组分单一、均匀的片状结构,在模拟太阳光下照射150m in,磺胺甲恶唑的降解率达89.8;,而且该薄膜具有较好的光催化稳定性.     

具有主导晶面的BiOIO3/BiOCl异质结制备与光催化性能

分别以乙二醇/去离子水为溶剂,通过溶剂热/水热法分别制备了具有不同主导晶面的BiOIO₃/{110}BiOCl和BiOIO₃/{001}BiOCl异质结。采用X射线衍射、扫描电子显微镜、能量色散谱和紫外可见漫反射光谱对制备的BiOIO₃/BiOCl光催化剂进行了表征。在可见光照射下,通过对罗丹明B和苯酚水溶液的光催化降解,考察了BiOIO₃/BiOCl异质结的光催化活性。结果显示25%BiOIO₃/{110}BiOCl异质结具有最高的光催化效率。BiOIO₃/{110}BiOCl较好的光催化性能是由于其在可见光区较强的光吸收,以及异质结结构和BiOCl所具有的(110)主导晶面有利于光生载流子的分离。超氧自由基(·O₂^-)和空穴(h⁺)是光催化过程中的主要活性物质。此外,根据实验结果探讨了光催化性能增强的机理。     

Fabrication of FeOOH/BiOCl Nanocomposites with Enhanced Visible Light Photocatalytic Activity

BiOCl as a two‐dimensional layer ternary oxide semiconductor, has been widely used in energy and environmental area due to its non‐toxicity, price and the good photocatalytic performance. However, BiOCl has a wide bandgap and can only absorb ultraviolet light, which limits its solar energy conversion efficiency for practical application. Herein, we report a facile synthesis of FeOOH/BiOCl nanocomposites by hydrothermal method. The results of XPS and FT‐IR indicated that FeOOH has been loaded on the nanocomposites. The chemical and optical properties of the nanocomposite are well‐characterized. The nanocomposite showed much more excellent photocatalytic performance compared with the individual FeOOH and BiOCl single component. Reactive specie trapping experiment indicated that · O^2– and h⁺ were the two main active species during the photocatalytic process of FeOOH/BiOCl nanocomposites.     

BiOCl/ZnO异质结型复合光催化剂的水热合成及其光催化性能

以醋酸锌、氯化钠、硝酸铋和氧氧化钠为原料,利用水热法合成了含BiOCl为1wt;、2wt;、4wt;、8wt;和16wt;的异质结型BiOCl/ZnO复合光催化剂.采用X射线粉末衍射(XRD)、扫描电镜(SEM)、傅里叶变换红外光谱(FT-IR)、紫外可见漫反射光谱(UV-Vis DRS)和光致发光(PL)谱等系列手段对所制备的光催化剂进行了表征.以紫外光(254 nm)为光源,酸性橙Ⅱ为光催化反应降解模型,进行光催化活性测试,考察了复合BiOCl对ZnO光催化剂反应活性和稳定性的影响.研究表明,异质结型BiOCl/ZnO复合光催化剂的光催化性能明显优于纯ZnO.当复合BiOCl的含量为4wt;时,光催化活性最佳,为纯ZnO的3.4倍,同时该催化剂在循环使用中具有更好的稳定性.     

MOF-808/BiOCl复合材料的制备及其光催化性能

将高稳定性的MOF-808与BiOCl结合,采用简便的水热法制备出新型MOF-808/BiOCl复合异质结材料。以环丙沙星(CIP)为污染物,探究复合材料MOF-808/BiOCl对CIP的光催化性能。发现含有10% MOF-808的复合材料(MOF-808/BiOCl-10%)表现出最佳的光催化活性。在紫外光照射20 min内,MOF-808/BiOCl-10%对CIP的光催化降解效率高达94.7%。通过X射线粉末衍射、扫描电镜、红外光谱、荧光光谱、紫外可见漫反射光谱、光电流、电化学阻抗等表征技术来考察材料的物相组成、形貌以及光电化学性质。紫外可见漫反射光谱的结果表明,MOF-808/BiOCl-10%材料光吸收范围得到提高。同时进行了自由基捕获实验。基于以上实验数据,提出了MOF-808/BiOCl复合材料可能的光催化机理。     

BiOCl nanostructures with different morphologies: Tunable synthesis and visible-light-driven photocatalytic properties

BiOCl nanostructures including microspheres,microflowers,microplates,and nanoplates,have been synthesized by a simple solvothermal method using bismuth nitrate and sodium chloride as raw materials without adding any additives.Structure and morphology of the products were characterized by powder X-ray diffraction,scanning electron microscopy,and transmission electron microscopy.The results indicated that the as-prepared microspheres and microflowers were composed of nanosheets.Although with different shape and lateral size,the nanoplates and microplales were all single-crystalline plates with exposed {001) facets.It was found that the volume ratio of polyethylene glycol 400 and H₂O in the solvent played a key role in the morphology of the products,and the possible growth mechanism was also discussed.The photocatalytic measurements indicated that the BiOCl samples exhibit good photocatalytic properties towards Rhodamine B.     

A Facile Controllable Synthesis, Growth Mechanism, and Photocatalytic Properties of Nanoscale BiOCl

Nanoscale tetragonal BiOCl samples have been synthesized using Bi[SC12H25]3 and CHCl3 as bismuth and chlorine sources by solvothermal reactions. The structure, morphology, and formation process have been investigated by SEM, TEM, HRTEM, XRD, and EDX analyses. The layered crystal structure feature of BiOCl may induce the growth of nano plates, which can subsequently aggregate into 3D spherical or flower-like microstructures under the presence of ethanol. The reaction temperature and the identity of secondary solvent influence the morphology. The yield of BiOCl depends on the completeness of the reaction and the degree of a competition reduction of BiOCl to Bi by ethanol. The as-synthesized 3D quasi-spherical BiOCl sample has an optical band gap of 3.15 eV, and shows much better photocatalytic performance on the degradation of methyl orange than that of commercial P25.     

A Novel Electrochemical Sensor Based on FeNi3/CuS/ BiOCl Modified Carbon Paste Electrode for Determination of Bisphenol A

In this study, we used voltammetric method in order to examine the electrochemical behavior of BPA. Hence, we constructed a new electrochemical sensor to detect BPA on the basis of the modified carbon paste electrode using FeNi₃/CuS/BiOCl as a novel nanocomposite. Results showed that when using optimized conditions, the new BPA sensor has a wide linear range between 0.1 μM and 300 μM, lower limit of detection of 0.05 μM, and good reproducibility and stability. Based on the findings, it could be concluded that our sensor can be substantially utilized for detecting BPA in the food samples with reasonable outputs.