Almost-sure path properties of fractional Brownian sheet

The almost sure sample function behavior of the vector-valued fractional Brownian sheet is investigated. In particular, the global and the local moduli of continuity of the sample functions are studied. These results give precise information about the continuity and the oscillation behavior of the sample functions.     

Markov traces on cyclotomic Temperley-Lieb algebras

In this note, we use generalized Tchebychev polynomials to define a trace function which satisfies certain conditions. Such a trace will be called the Markov trace. In particular, we obtain formulae for the weights of the Markov trace. As a corollary, we get a combinatorial identity. This generalizes Jones's 1983 result on Temperley-Lieb algebras.

     

Hydroxyapatite coating on porous silicon substrate obtained by precipitation process

Hydroxyapatite Ca₁₀(PO₄)₆(OH)₂ (HAP) is known as a bioactive and biocompatible material, HAP coatings were used to improve the biocompatible of substrate by many researcher, In this work, HAP thin films on porous silicon (PS) substrates have been prepared by aqueous precipitation method with rapid thermal annealing (RTA) processes. The HAP films had been prepared under the annealing temperature ranging from 300 to 1000 °C. By the measurement of X-ray diffraction (XRD), it was found that for the crystallinity optimization, the heat-treatment at 850–950 °C for 1 h would be favorable. Atomic force microscopy (AFM) and scanning electron microscope (SEM) measurements reveal a dense and smooth surface of the HAP film, and tightly adherence of the coating on porous silicon substrate after sintered. Thus, by this method, porous silicon could be increased its bioactivity and so that could be used in the biomedical area.     

复合结构丝中的电流密度分布和巨磁阻抗效应

提出了由中间为高电导率的非铁磁性金属丝外面包裹一层铁磁材料组成的复合结构丝的电流 密度分布和巨磁阻抗(GMI)效应模型，并对Cu/FeCoNi复合丝进行了数值模拟. 结果表明：在 相同的磁性材料几何尺寸和磁特性时，Cu/FeCoNi复合丝铁磁层内的电流随频率的升高比匀 质FeCoNi铁磁丝内的电流更趋于表面分布，而且开始出现趋肤效应时对应的频率明显降低. 当在比较低的频率下就可以观察到明显的MI变化时，复合结构丝中的电阻和电抗变化主要是 由趋肤效应引起，趋肤效应仍然是引起复合结构材料(包括多层薄膜结构) 关键词： 电流密度 巨磁阻抗效应 趋肤效应     

5 TW/40 fs级台式钛宝石激光系统研究

在TSA-25系统输出35 mJ,800 nm啁啾脉冲的基础上,建立了以钛宝石作为增益介质的二级啁啾脉冲放大(CPA)系统。使用0.6 J和1.6 J,532 nm,10 Hz Nd∶YAG激光抽运,输出脉冲能量达到500 mJ,经压缩脉冲宽度为41 fs,压缩器的能量转换效率为63%,峰值功率可达7.6 TW。通过对放大器系统的钛宝石晶体、抽运密度以及多通结构通道数的选择等实验,有效地提高了能量放大器的萃取效率。其主放大器能量萃取效率达到32%,整个系统占用尺寸不到10 m2。     

一维螺旋状3，6-哒嗪二甲酸镉(Ⅱ)配位聚合物的合成与结构

Using the ligand pyridazine-3，6-dicarboxylate (H₂pzdc)， a coordination polymer [Cd₂(pzdc)₂(H₂O)₄] was synthesized and characterized by elemental analysis， thermal analysis， IR and single-crystal X-ray diffraction. The complex crystallizes in the tetragonal system with space group I4₁/a. The crystallographic data are: a=1.470 6(4) nm， c=1.489 8(6) nm， V=3.222 0(19) nm³， Z=16， μ=2.725 mm^-1， D_c=2.594 g·cm^-3， R₁=0.017 8， wR₂=0.044 6. In the complex， the cadmium(Ⅱ) ions with the eight-coordinated dodecahedral geometry are linked by the pzdc ligands to generate one-dimensional chains， which are associated into the three-dimensional architecture via O-H…O hydrogen bonding. CCDC: 658853.     

荧光光谱法研究十六烷基三甲基溴化铵与牛血清白蛋白的相互作用

十六烷基三甲基溴化铵;牛血清白蛋白;结合反应;热力学参数;荧光光谱     

活化/失活反应对原子转移自由基共聚产物微观结构的影响

提出了一个可以处理原子转移自由基共聚及其产物微结构的模型,采用计算机模拟产生了包括活化/失活反应的ATRcP稳态增长反应链,得到了有关链段分布的信息.模拟发现,含有休眠过程的ATRcP产物与常规的自由基的相比组成结构和序列结构完全一致,即活化/失活反应不影响ATRcP产物的微组成与微序列结构.     

CuZnAl水滑石衍生催化剂上甲醇水蒸气重整制氢Ⅲ.合成水滑石用金属盐的影响

采用共沉淀法,用不同金属盐为Cu源和Zn源合成了一系列CuZnAl水滑石,以此为前体经600℃焙烧后制得相应催化剂.用硝酸盐和醋酸盐合成的水滑石结晶度高,其衍生催化剂比表面积大、Cu的分散性好且易于还原;而用硫酸盐和盐酸盐合成的水滑石结晶度差,其衍生催化剂比表面积小、Cu的分散性差且不易还原.反应评价结果显示,用硝酸盐和醋酸盐制得的催化剂活性高、反应稳定性好;而用硫酸盐和盐酸盐制得的催化剂由于低的Cu表面积以及S和Cl的毒化作用而几乎无催化活性.在醋酸盐制备的催化剂上,产物干气中CO的浓度明显较低,在250℃和WHSV=3.28 h-1的条件下约为0.03%~0.04%,仅为硝酸盐所制催化剂上CO浓度的1/5;在210℃和WHSV=0.5 h-1的条件下,该催化剂上甲醇几乎完全转化,同时CO浓度降至约0.005%.N2O滴定、CO2程序升温脱附和程序升温还原结果显示,用醋酸盐和硝酸盐制备的催化剂具有极相近的Cu表面积和表面碱性,但前者CuO的还原峰温较后者低近70℃,归因于ZnO与CuO间的强相互作用,这是催化剂具有良好选择性的可能原因.     

A concise synthesis of nornitidine via nickel- or palladium-catalyzed annulation

A concise method to synthesize benzo[c]phenanthridine alkaloid, nornitidine, was developed utilizing nickel- or palladium-catalyzed iminoannulation of an internal alkyne. The advantages of this strategy included readily available starting materials, inexpensive reagents, short reaction steps, and good yields.