Phase structure and crystallization behavior of polyethylene in its blends with cis-1,4-butadiene rubber

Phase structure and crystallization behavior of polyethylene(PE) in its blends with cis-1,4-butadiene rubber(BR) at different blend ratios and sample preparation conditions were studied. The PE is finely dispersed in the BR matrix. For samples hot pressed at 145 °C, circular PE microdomains with randomly oriented PE lamellar aggregates were produced. The domain size and number increase with increasing PE content. When the PE content is over 10 wt%, most of the PE domains impinged each other. The separated PE domains are connected by PE stripes with parallel arranged lamellar aggregates. For samples hot pressed at 140 °C, elongated PE microdomains with oriented PE lamellar aggregates were obtained due to the shear flow. The crystallization of PE in the blends depends on the phase structure. Confined crystallization of PE occurs in small microdomains at relatively low temperature. With the increase of domain size, the crystallization ability of PE increases while the confined crystallization decreases.     

One‐Pot Synthesis of Aliphatic Nitro Compounds by Michael/retro‐Claisen Fragmentation Domino Reaction

A novel and concise method for the construction of γ‐nitro ketones and 1,3‐dinitro compounds with chemoselective acyl transfer has been presented under basic conditions via one‐pot reactions. These reactions feature high atom‐ and step‐economic possess, mild condition and simple operation for one‐pot synthesis of aliphatic nitro compounds. This protocol provides the products in good yields. The possible reaction mechanism has also been proposed.     

Efficient Synthesis of Triarylamines Catalyzed by Copper(I) Diazabutadiene Complexes

Cuprous chloride was coordinated by diazabutadiene (DAB‐R) ligands to form Cu(I)‐(DAB‐R) complexes, most of which have a 1:1 ratio of Cu to DAB‐R as reported. In the case of a special DAB‐ⁱPP, N,N′‐bis(2,6‐diisopropylphenyl)‐1,4‐diaza‐1,3‐butadiene, an unexpected composition of complex was found with the formula Cu(I)Cl(DAB)₂. When employed as catalyst for triarylamine synthesis from the coupling of aryl halides with primary and secondary arylamines, the new Cu(I)‐(DAB‐ⁱPP) complex displayed high efficiency.     

One‐pot Two‐Step Cycloaddition Reaction for Convenient Synthesis of Polycyclic Spirooxindole‐fused [1,3]Oxazines

The novel spirooxindoline fused [1,3]oxazines were efficiently synthesized from Diels‐Alder reaction of N‐arylmaleimides with 1,2‐dihydro‐2‐oxospiro[3H‐indole‐3,2′‐[2H,9aH‐pyrido[2,1‐b][1,3]oxazines], which were generated in situ from three‐component reactions of substituted pyridines and isatins with methyl propiolate, or dimethyl acetylenedicarboxylate. The stereochemistry of the products was clearly clarified by the analysis of ¹H NMR data and single crystal structures of the obtained polycyclic compounds.     

Aggregation‐Induced Emission of Hexaphenyl‐1,3‐butadiene

A new type of AIE molecules based on hexaphenyl‐1,3‐butadienes was reported with respect to the synthesis and characterization. This material exhibited different maximum emission wavelength and enhanced emission intensity at different aggregate state (amorphous and crystalline state).     

基于5-磺酸基间苯二甲酸钠和双三唑烷烃的Cu(Ⅱ)配合物的合成、结构和性质

利用5-磺酸基间苯二甲酸钠(NaH₂sip)和双三唑烷烃,合成了3个配合物[Cu_0.5(btm)(H₂O)](H₂sip)·H₂O}_n(1,btm=双三唑甲烷),{[Cu(btp)₂(H₂sip)(H₂O)](NO₃)·4H₂O}_n(2,btp=双三唑丙烷)和{[Cu(btb)₂(Hsip)]_n(3,btb=双三唑丁烷)。化合物1为一维双链结构;化合物2为二维四方网络结构,多个二维层依次叠加形成三维超分子结构;化合物3也具有二维层状结构,其中金属铜离子和双三唑丁烷构成的一维双链结构经双齿μ₂-Hsip^2-配体连接构成了二维层状结构。同时对配合物的热稳定性和顺磁共振特性进行了讨论。     

1,3-双[3-(1-甲氧基-2-羟基丙氧基)丙基]封端聚硅氧烷的合成

以1,3-双[3-(1-甲氧基-2-羟基丙氧基)丙基]四甲基二硅氧烷和八甲基环四硅氧烷(D4)为原料,通过阳离子催化开环聚合制备了1,3-双(3-(1-甲氧基-2-羟基丙氧基)丙基)封端聚硅氧烷,研究了反应温度,反应时间,催化剂种类及加入量对于聚合反应的影响,结果表明,最佳反应条件为:反应温度65℃,反应时间24h,浓硫酸作为催化剂加入量为反应物质量的0.3%,此时反应拥有最高的转化率。通过红外光谱与核磁共振光谱对产物进行了表征。     

Aryne‐Induced Novel Tandem 1,2‐Addition/(3+2) Cycloaddition to Generate Imidazolidines and Pyrrolidines

A new “single‐flask” method was developed for the synthesis of imidazolidines and pyrrolidines with high stereoselectivity. First, a Schiff base was arylated with an aryne. Second, an intramolecular proton transfer took place from the methylene position to the anionic aryne ring. Third, the resultant ylide reacted with a second equivalent of the same Schiff base in situ or an electron‐deficient alkene through a (3+2) cycloaddition. These sequential tandem 1,2‐addition/(3+2) cycloaddition reactions led to the desired heterocycles in 63–88 % yields.     

Highly Conductive PEDOT:PSS Films with 1,3‐Dimethyl‐2‐Imidazolidinone as Transparent Electrodes for Organic Light‐Emitting Diodes

Highly conductive poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) films as transparent electrodes for organic light‐emitting diodes (OLEDs) are doped with a new solvent 1,3‐dimethyl‐2‐imidazolidinone (DMI) and are optimized using solvent post‐treatment. The DMI doped PEDOT:PSS films show significantly enhanced conductivities up to 812.1 S cm⁻¹. The sheet resistance of the PEDOT:PSS films doped with DMI is further reduced by various solvent post‐treatment. The effect of solvent post‐treatment on DMI doped PEDOT:PSS films is investigated and is shown to reduce insulating PSS in the conductive films. The solvent posttreated PEDOT:PSS films are successfully employed as transparent electrodes in white OLEDs. It is shown that the efficiency of OLEDs with the optimized DMI doped PEDOT:PSS films is higher than that of reference OLEDs doped with a conventional solvent (ethylene glycol). The results present that the optimized PEDOT:PSS films with the new solvent of DMI can be a promising transparent electrode for low‐cost, efficient ITO‐free white OLEDs.