升降法确定的疲劳强度估计量的统计特性

当疲劳强度服从正态分布N(μ,σ2)时,文[11]给出了,在特定条件下,Sri=1/2(Si+Si+1)是疲劳强度均值μ的极大似然估计的证明,笔者认为该证明值得商榷.本文将特定条件推广到一般条件,得到了新的结论当疲劳强度服从任何给定的标准差的正态分布N(μ,σ02)时,在一般条件下,Sri=1/2(Si+Si+1)是疲劳强度均值μ的极大似然估计.并给出了严格的证明.     

应变Si1-xGex层中p型杂质电离常温和低温特性

本文采用解析的方法计算了应变Si1-xGex层中p型杂质电离度与Ge组分x、温度T以及掺杂浓度N的关系.发现常温时,在同一Ge组分下,随着掺杂浓度的升高,杂质的电离度的先变小,而后又迅速上升到1.在同一掺杂浓度下,轻掺杂时,杂质的电离度随Ge组分的增加先变大,而后几乎不变;重掺杂时,杂质电离能变为0后,杂质电离度为1.低温下,轻掺杂时,载流子低温冻析效应较为明显,杂质的电离度普遍较小,当掺杂浓度大于Mott转换点时,载流子冻析效应不再明显,电离率迅速上升到1.在同一Ge组分下,随着掺杂浓度的升高,杂质的电离度先变小,后变大,而后又迅速上升到1.在同一掺杂浓度下,轻掺杂时,杂质的电离度随Ge组分的增加变大;重掺杂时,杂质电离能变为0后,杂质电离度为1.     

Nilsson平均场加邻近轨道对力模型对超铀区和稀土区核素的描述

利用严格可解的平均场加邻近轨道对力模型, 在区分质子和中子及冻结质子对激发两种情况下对超铀区核素^226—234Th, ^230—239U, ^236—243Pu, 及稀土区核素^160—170Er, ^166—176Yb, ^172—180Hf的结合能, 对激发能, 奇偶能差及偶偶核最低激发态转动惯量进行了计算并与实验结果进行了比较.     

Effect of Incident Intensity on Films Growth in Pulsed Laser Deposition

Incident intensity, defined by the amount of particles deposited per pulse, is an important parameter in the film growth process of pulsed laser deposition （PLD）. Different from previous models, we investigate the irreversible and reversible growth processes by using a kinetic Monte Carlo method and find that island density and film morphology strongly depend on pulse intensity. At higher pulse intensities, lots of adatoms instantaneously diffuse on the substrate surface, and then nucleation easily occurs between the moving adatoms resulting in more smaller-size islands. In contrast, at the lower pulse intensities, nucleation event occurs preferentially between the single adatom and existing islands rather than forming new islands, and therefore the average island size becomes larger in this case. Additionally, our results show that substrate temperature plays an important role in film growth. In particular, it can determine the films shape and weaken the effect of pulse intensity on film growth at the lower temperatures by controlling the mobility rate of atoms. Our results can match the related theoretical and experimental results.     

各向同性湍流中颗粒引起湍流变动的直接模拟

本文通过直接数值模拟对均匀各向同性湍流中颗粒对湍流的变动作用进行了研究.颗粒相的体积分数很小而质量载荷足够大,以至于颗粒之间的相互作用可以忽略不计,而重点考虑颗粒与湍流间能量的交换。颗粒对湍流的反向作用使得湍动能的耗散率增强,以至于湍动能的衰减速率增大.湍动能的衰减速率随颗粒惯性的增大而增大。三维湍动能谱显示,颗粒对湍动能的影响在不同的尺度上是不均匀的。在低波数段,流体带动颗粒,而高波数段则相反.     

径向剪切干涉法综合诊断光束质量研究

 为了解决高功率激光装置光束质量诊断系统的自验证问题，研究了基于空间相位调制的径向剪切干涉法综合诊断光束质量的实验应用。该方法理论上只需一台干涉仪且从单幅干涉图中获取光束的近场、相位和远场分布信息。实验结果表明，目前可以得到高分辨率的相位分布，由测量近场和相位恢复出的远场同CCD直接测量得到的远场形态相同，环围能量比曲线相当吻合，不足之处在于只能提取近场较低空间频率成分，还达不到CCD直接测量的空间分辨水平。     

钐(Ⅱ)类卡宾CH_3SmCH_2X(X=Cl、Br和Ⅰ)促进乙烯环丙烷化反应途径的理论研究(英文)

用密度泛函B3LYP方法研究了过渡金属钐类卡宾与乙烯的环丙烷化反应的机理。对三种不同的钐的SS试剂CH_3SmCH_2X(其中X=Cl、Br和Ⅰ)分别和CH_2CH_2反应的各反应物、中间体、过渡态和产物构型的全部结构几何参数进行了优化,用内禀反应坐标(IRC)计算和频率分析方法,对过渡态进行了验证。结果表明：CH_3SmCH_2X(其中X=Cl、Br和Ⅰ)与CH_2CH_2环丙烷化反应按亚甲基转移通道(通道A)和卡宾金属化通道(通道B)都可以进行,与锂类卡宾的反应机理相同,只是按亚甲基转移通道(通道A)进行反应较容易一些,而且此反应在较低的温度下就可以发生。     

Effects of Processing Parameters on Microstructure and Properties of Nanoscale ZrC/ZrB2 Multilayered Coatings

ZrC/ZrB2 multilayered coatings with bilayer periods of 3.5-40nm are synthesized by rf magnetron sputtering. Analyses of x-ray diffraction, scanning electron microscopy and nanoindentation indicate that multilayered coatings possess much higher hardness and greater fracture resistance than monolithic ZrC and ZrB2 coatings. A maximum hardness （41.TCPa） and a critical fracture load （73.7mN） are observed in the multilayer with A = 32 nm deposited at the substrate bias -40 V. Higher residual stress built in the ZrC layer can be released by periodic insertion of ZrB2 into the ZrC layer. A clear multilayered structure with mixed ZrB2（001）, ZrB2 （002） and ZrC （111） orientations should be responsible for the enhanced mechanical properties.