The Second Type Singularities of Symplectic and Lagrangian Mean Curvature Flows

This paper mainly deals with the type II singularities of the mean curvature flow from a symplectic surface or from an almost calibrated Lagrangian surface in a Kähler surface. The relation between the maximum of the Kähler angle and the maximum of |H|² on the limit flow is studied. The authors also show the nonexistence of type II blow-up flow of a symplectic mean curvature flow which is normal flat or of an almost calibrated Lagrangian mean curvature flow which is flat.     

熔融制样-X射线荧光光谱法测定高碳铬铁中铬、硅和磷的含量

高碳铬铁是炼钢生产中重要的原料,被广泛应用于生产不锈钢、滚动轴承钢、工具钢、渗氮钢、热强钢、调质钢、渗碳钢和耐氢钢等。其中铬、硅、磷的含量不仅是高碳铬铁价格结算的依据,也是炼钢工艺的重要考核指标。目前,高碳铬铁的检测主要根据国家标准和行业的相关标准进行化学分析[1-3]。可是这些方法复杂难以掌握,且成本高,很难满足现代化的炼钢生产对合金检测提出的快速、准确的要求。X射线荧光光谱法有分析元素范围宽、精度高     

控制图在直读光谱仪期间核查中的应用

期间核查是指在两次校准(或检定)的间隔期内进行的核查,核查对象有仪器设备、标准物质、计量基准、传递标准或工作标准,以判断所使用的设备、标准物质等是否保持检定时的置信度,满足检验工作的需要。此外,ISO/IEC 17025:2005《检测和校准实验室能力的通用要求》中第5.5设备和第5.6测量溯源性两个要素中都提到期间核查[1];CNAS-CL01:2010《检测和校准实验室能力认可     

一种基于物体质心的图像自动化校准方法

图像校准是将任意相邻两图像都具有公共部分的一列图像合成一副全图的图像处理过程.而图像自动化校准的难点在于对一组图像公共部分特征信息的提取和自动匹配,尤其是自动匹配和图像校准的误差分析.本文基于放射变换不变性,给出了一种基于特征信息质心的自动匹配方法,与目前国际上主流特征提取和特征校准方法相比,本文方法较准确,且适用于卫星图片及一些MRI和CT 图片.本文方法的另一优点是具有线性计算复杂度.     

国防科技工业应用化学一级计量站 全国化工标准物质委员会标准物质研究开发中心

<正>国防科技工业应用化学一级计量站(原国防科工委化学计量一级站)是1986年建于中国兵器工业第五三研究所的专业计量技术机构,同时也是兵器非金属材料理化检测中心、国家进出口商品非金属材料认可实验室、国防计量2501校准实验室、全国化工标准物质委员会标准物质研究开发中心。目前,专门从事化学计量的人员196人,其中研究员15人、高级工程师32人。拥有各种分析测试仪器150余台,建有国防计量最高标准30余项。主要承担国防科工委化学计量科研任务;国防系统化学量值传递,计量标准的考核、复查、人员培训;国防大型试验基地现场计量保证;标准物质的研制、定值、发放;进出口非金属材料检验;化学产品测试及未知样品的剖析等。先后完成计量科研课题40余项,有20余项达到国     

A three-step system calibration procedure with error compensation for 3D shape measurement

System calibration, which usually involves complicated and time-consuming procedures, is crucial for any three-dimensional （3D） shape measurement system based on vision. A novel improved method is proposed for accurate calibration of such a measurement system. The system accuracy is improved with considering the nonlinear measurement error created by the difference between the system model and real measurement environment. We use Levenberg-Marquardt optimization algorithm to compensate the error and get a good result. The improved method has a 50% improvement of re-projection accuracy compared with our previous method. The measurement accuracy is maintained well within 1.5% of the overall measurement depth range.     

Calibrating an optical fiber humidity sensor and applying it in real-time monitoring of relative humidity in fresh concrete

A doubly cladding single-mode fiber humidity sensor is fabricated by agarose. The sensor has an insertion loss of -0.08 dB and a power change of -17.83 dB. The responses of the sensor to a relative humidity （RH） range form 30% to 100% at a temperature range form 25 to 34 ~C are validated. The experiments demonstrate that the absorbability of agarose gel to moisture decreases with increasing RH in measured gas. We propose a calibration method that uses lookup tables and construct a corresponding calibration matrix. Using the sensor, we conduct real-time monitoring of RH in fresh concrete during its hardening nrocess.     

Method to accurate calibrate deposition rates of EUV multilayer coatings

Random thickness error is an important factor which effects the calibration accuracies of deposition rates for extreme ultraviolet （EUV） multilayer coatings fabricated by sputter deposition techniques. A least square fitting method is proposed to determine deposition rates and extract random thickness errors accurately. The validity of this method is shown by evaluating two deposition systems with control abilities of -0.1 nm and better than 0.01 nm respectively.     

薄膜电导率法总有机碳分析仪的校准

探索薄膜电导率法总有机碳分析仪的校准方法.对薄膜电导率法总有机碳分析仪的性能参数进行调查统计,从示值误差、测量重复性、线性误差、检出限和记忆效应5个方面对仪器进行校准.采用500μg/L的蔗糖标准溶液、响应值分别达量程50％、80％对应的蔗糖溶液,以测量值的相对误差最大者作为仪器的相对示值误差,该项建议值为±10％;以500μg/L蔗糖标准溶液7次测量值的相对标准偏差反映测量重复性,应小于2％;利用仪器绘制标准曲线,以响应值为50％量程对应的溶液测量结果的相对误差作为线性误差,应小于10％;利用11次空白溶液测定值的3倍标准偏差计算检出限,应低于50μg/L;测量高浓度样品后充分冲洗仪器,以测量高浓度样品前后500μg/L蔗糖溶液的测定值相对偏差作为记忆效应,应在±3％内.该方法适用于企业质量控制和计量部门计量校准.