小试金富集ICP-AES法同时测定试样中的铂、钯、金

文章报道了用小试金富集ICP AES法同时测定试样中的铂、钯和金 ,将 1 0～ 2 0g试样中的铂、钯、金富集在毫克量的银合粒中 ,制成溶液后用ICP AES法同时测定铂、钯和金。该方法的检出限 (μg·mL-1 )Pt,Pd ,Au分别为 0 0 1 ,0 0 0 5 ,0 0 1 ,相对标准偏差 (RSD ,n =1 0 )分别为 0 1 % ,0 1 2 % ,0 0 9% ,标准回收率均在 97%以上。生产实践表明 ,本方法是一种快速、简便、准确的分析方法 ,已被我们应用于测定样品中的铂 ,钯和金     

ICP-AES法测定润滑油中磨损金属元素的含量

提出了用ICP AES直接测定润滑油中主要磨损金属元素的分析方法。对仪器的工作条件进行了优化 ,以多元素油基贮备液配制而成的ConostanS 2 1和Conostan 75油基标样制作校正曲线 ,油样品采用煤油稀释 5倍 ,测定了润滑油中主要磨损金属元素 ,各元素的相对标准偏差RSD %均小于 1%。阐述了LeemanLabs多道ProfileICP的分析效力以及具有多元素同时测定、快速和准确的特点     

胶束电动色谱法分离与测定己烯雌酚片剂中的有效成分

建立了一种用来分离测定己烯雌酚的胶束电动色谱法,。通过对十二烷基硫酸钠、胆酸钠、脱氧胆酸钠3种表面活性剂进行比较,选定以60mmol/LSDS 10mmol/L硼砂的水溶液作为背景电解质溶液,研究了不同pH对分离己烯雌酚的影响。该方法被应用于测定己烯雌酚片剂中有效成分的含量。     

Comparative evolved gas analytical and structural study on trans-diammine-bis(nitrito)-palladium(II) and platinum(II) by TG/DTA–MS, TG–FTIR, and single crystal X-ray diffraction

Detailed study on identification and thermal decomposition of solid title compounds 1 and 2 crystallized from the used aqueous ammonia solutions of Pd(NH₃)₂(NO₂)₂ and Pt(NH₃)₂(NO₂)₂, has been carried out. Beyond the composition of complexes 1 and 2, their trans square planar configuration have already been recognized by reference IR spectra and powder XRD patterns, nevertheless their exact molecular and crystal structure as of trans-Pd(NH₃)₂(NO₂)₂ (1, Pd-NN) and trans-Pt(NH₃)₂(NO₂)₂ (2, Pt-NN) has been determined by single crystal X-ray diffraction (R = 0.0515 and 0.0341), respectively. Despite their compositional and configuration analogy, they crystallize in different crystal systems and space groups. The crystals of 1 (Pd-NN) are triclinic (space group No. 2, P-1, a = 5.003(1) Å, b = 5.419(1) Å, c = 6.317(1) Å, α = 91.34(2)°, β = 111.890(10)°, γ = 100.380(10)°), while those of 2 (Pt-NN) are monoclinic (space group No. 5, C2, a = 7.4235(16) Å, b = 9.130(2) Å, c = 4.4847(10) Å, β = 99.405(7)°).The pyrolytic processes of 1 and 2 (which might be sensitive to shock and heat) have been followed by simultaneous thermogravimetric and differential thermal analysis (TG/DTA), while the evolved gaseous species have been traced in situ by online coupled TG/DTA–EGA–MS and TG–EGA–FTIR instruments in He and air. Pd and Pt powders, forming as final solid products in single step, are captured and checked by TG and XRD. Whilst the unified evolved gas analyses report evolution of N₂, H₂O, NH₃, N₂O, NO, and NO₂ gases as gaseous product components in the exothermic decomposition of both trans-Pd(NH₃)₂(NO₂)₂ (1) and trans-Pt(NH₃)₂(NO₂)₂ (2) starting from ca. 230 and 220 °C, in sealed crucibles with a pinhole on the top, respectively.     

Monolithic chromatography for elemental and speciation analysis

Monolithic supports are increasingly used in the field of chromatography. They are appropriate for different applications (e.g., separation of biomolecules, organic acids and inorganic anions). However, only a few research groups are investigating the potential of using monolithic phases for rapid separation of metal cations and elemental speciation analysis.Monolithic supports based on porous monolithic silica have been successfully applied in separation of alkaline-earth and transition-metal cations in environmental waters and high ionic-strength samples.The present review covers applications of monolithic supports for chromatographic separation of metal cations and the potential for using monolithic chromatography in elemental speciation analysis. We critically evaluate the performances and the advantages of monolithic supports and compare them to conventional particle-packed chromatographic supports.     

Modified iron oxide nanoparticles as solid phase extractor for spectrophotometeric determination and separation of basic fuchsin

This study presents a novel separation, preconcentration and determination of basic fuchsin (BF) in an aqueous solution by sodium dodecyl sulfate (SDS)-bounded iron oxide nanoparticles (S-IONPs). It is shown that the novel magnetic nano-adsorbent is quite efficient for the adsorption and desorption of BF at 25 °C. Different parameters such as pH, temperature, ionic strength and composition of desorbent solvent were optimized. The effect of some co-existing ions on the determination was investigated. The nanoparticles were analyzed by transmission electron microscopy (TEM) and the sizes of S-IONPs were in the range of 20-100 nm. The method showed good linearity for the determination of BF in the range of 10-300 ng mL⁻¹ with a regression coefficient of 0.9989. The limit of detection (LOD) (signal-to-noise ratio of 3:1) was 0.0073 μg L⁻¹ and the relative standard deviation (RSD) for 0.03 μg mL⁻¹ and 0.2 μg mL⁻¹ of BF were 4.53% and 4.73%, respectively. The BF was determined successfully in spiked samples of Karoon River water.     

优氯净的分析测定新方法研究

本文利用优氯净对紫外光有吸收的特性,采用紫外分光光度法对优氯净的含量进行测定.实验考察了测定过程中可能存在的各种影响因素,证明此方法是一种简便的、高效可行的优氯净的分析方法.     

Uncertainty in the determination of glucose in aqueous solutions by high‐performance liquid chromatography with evaporative light scattering detection

The determination of glucose and other carbohydrates is the most widespread chemical analysis that is performed within the industries of food, beverage, forage, biomass, pulp and paper, pharmaceuticals among others. Besides that, sugar refineries need to control their products, by‐products and effluents, and furthermore, glucose in the sucrose refining process, is considered an impurity, which shall be controlled. Being HPLC the most currently instrumental technique used for glucose analysis, the evaporative light scattering detector (ELSD) offers advantages (sensitivity, possibility for operating in gradient mode) over the also used refractive index detector. In this work, an HPLC‐ELSD methodology was optimised and validated, aiming the estimate of the uncertainty associated with the results at low levels of concentration of glucose to be measured. Linearity of the response was obtained in the range of glucose concentrations from 20 to 300 mg/L, with an analysis time of 10 min. The global uncertainty was estimated accordingly to the bottom‐up approach used by Eurachem. It was 13% on average for concentrations from 100 to 300 mg/L. For lower concentrations, uncertainty increased significantly up to 30% in the vicinity of the LOD of the method.     

Combination of mid- and near-infrared spectroscopy for the determination of the quality properties of beers

The combination of infrared (MIR) and near-infrared (NIR) spectroscopy has been employed for the determination of important quality parameters of beers, such as original and real extract and alcohol content. A population of 43 samples obtained from the Spanish market and including different types of beer, was evaluated. For each technique, spectra were obtained in triplicate. In the case of NIR a 1 mm pathlength quartz flow cell was used, whereas attenuated total reflectance measurements were used in MIR. Cluster hierarchical analysis was employed to select calibration and validation data sets. The calibration set was composed of 15 samples, thus leaving 28 for validation. A critical evaluation of the prediction capability of multivariate methods established from the combination of NIR and MIR spectra was made. Partial least squares (PLS) and artificial neural networks (ANN) were evaluated for the treatment of data obtained in each individual technique and the combination of both. Different parameters of each methodology were optimized. A slightly better predictive performance was obtained for NIR-MIR combined spectra, and in all the cases ANN performs better than PLS, which may be interpreted from the existence of some non-linearity in the data. The root-mean-sqare-error of prediction (RMSEP) values obtained for the combined NIR-MIR spectra for the determination of real extract, original extract and ethanol were 0.076% w/w, 0.14% w/w and 0.091% v/v.     

CdSe quantum dots as luminescent probes for spironolactone determination

Based on the quenching of the fluorescence of CdSe quantum dots (QDs) by spironolactone, a simple, rapid and specific method for spironolactone determination was proposed. In the optimum conditions, spironolactone concentration versus quantum dot fluorescence gave a linear response with an excellent 0.997 correlation coefficient, between 2.5 and 700 mg/mL (6.0-1680 μmol/L) and the limit of detection (S/N = 3) was 0.2 μg/mL (0.48 μmol/L). The contents of spironolactone in pharmaceutical tablets were determined by the proposed method and the results agreed with the claimed values. The possible mechanism for the reaction was also discussed.