基于炉口火焰辐射测温的转炉终温预测研究

转炉炼钢的铁水终点温度是衡量铁水是否符合出钢要求的一个重要指标,目前仍主要依靠人工经验进行控制,其预测精度难以保证。为了能够有效的预测终点铁水的温度,并能满足不同的转炉炉口尺寸的要求,提出了一种基于炉口火焰温度测量的转炉终点铁水温度预测的新方法。利用可以采集可见光和近红外波段的微型光谱仪作为关键器件构建了炉口火焰辐射信息的采集系统,实现对转炉炼钢现场的炉口火焰辐射信息进行实时、有效的采集。同时综合考虑了炉口火焰的实际温度范围和现场的测量距离,通过改进的系统标定方法,对所构建的辐射信息采集系统进行标定,并利用双波长法获得了炉口火焰的辐射温度。鉴于炉口的火焰温度与炉内的铁水温度之间存在着一定的联系,还利用所测得的火焰温度以及与铁水温度相关的转炉吹炼过程参数,建立了基于支持向量机的炉内铁水温度的回归预测模型。对68炉现场采集到的转炉吹炼数据进行验证实验后表明该方法的预测精度要优于人工经验,且接近采用副枪的铁水温度测量方式,可为中小型转炉的终点温度预测提供一种有效可行的方案。     

Radiation Vulcanization of Magnetorheological Elastomers Based on Silicone Rubber

介绍了两种制备磁流变弹性体的硫化方法即高温硫化和辐射硫化. 研究中采用动态力学分析仪(DMA)测量了样品的动态力学特性.特别是对样品的磁流变效应和耐久性进行了详细的测试. 实验结果表明,经过辐射硫化的样品具有更大的零场模量和磁致模量,以及更好的磁流变效应和耐久性. 为了解释这些结果,文章对样品的体积形变和增塑剂渗出都作了详细的分析. 在硫化过程中样品的体积保持稳定是辐射硫化样品具有大磁致模量的重要原因,而增塑剂渗透性小也是辐射硫化样品具有高磁流变效应和耐久性的重要因素.     

Soft X-ray induced chemical modification of polysaccharides in vascular plant cell walls

Scanning transmission X-ray microscopy and micro carbon X-ray Absorption Near Edge Spectroscopy (C-XANES) can provide quantitative information regarding the distribution of the biopolymers cellulose, hemicellulose, and lignin in vascular plant cell walls. In the case of angiosperms, flowering plants, C-XANES may also be able to distinguish variations in lignin monomer distributions throughout the cell wall. Polysaccharides are susceptible to soft X-ray irradiation induced chemical transformations that may complicate spectral analysis. The stability of a model polysaccharide, cellulose acetate, to variable doses of soft X-rays under conditions optimized for high quality C-XANES spectroscopy was investigated. The primary chemical effect of soft X-ray irradiation on cellulose acetate involves mass loss coincident with de-acetylation. A lesser amount of vinyl ketone formation also occurs. Reduction in irradiation dose via defocusing does enable high quality pristine spectra to be obtained. Radiation induced chemical modification studies of oak cell wall reveals that cellulose and hemicellulose are less labile to chemical modification than cellulose acetate. Strategies for obtaining pristine C-XANES spectra of polysaccharides are presented.     

Radiation damage from EELS and NEXAFS in diesel soot and diesel soot extracts

Carbon NEXAFS and EELS spectra of soot, and NEXAFS spectra of soot extracts, are presented. The EELS spectra of solid soot particles from a TEM-EELS show fewer structures than the corresponding NEXAFS spectra obtained at two different synchrotron beamlines. We attribute radiation damage in the TEM-EELS to the failure at resolving structures of surface functional carbon groups in or on soot. NEXAFS spectra of soot extracts studied with a scanning transmission X-ray microscope show alterations during X-ray exposure, which can be explained by a simple chemical model where oxygen apparently reacts with the sample. When the same extract is studied in an ultrahigh-vacuum beamline, no such alterations are observed.     

Wavenumber space and physical space responses of a periodically ribbed plate to a point drive: A discrete approach

An efficient technique to estimate the vibration of and sound radiation from a stiffened fluid-loaded plate excited by a mechanical point force is presented. The process is based on the formulation in the wavenumber domain of the transversal displacement of the plate and of the acoustic pressure in the fluid domain. Analytical expressions can be easily obtained for these fields in the case of an infinite plate with stiffeners uniformly spaced. The approach consists then on using the discrete Fourier Transform to deduce the associated fields in the physical space. This transform necessitates truncation of the wavenumber domain and sampling of these wavenumber fields with adequate criterions to avoid loss of information and aliasing. These criterions are discussed in this paper concerning displacement point results on the plate and pressure point results in a part of the fluid domain “close to” the plate. This technique requires relatively small computing time and provides an efficient tool to analyse the vibro-acoustic behaviour of the stiffened plate, both, in the physical and the wavenumber spaces. A comparison between a case discussed in the literature and some examples are presented to illustrate the validity and interests of this approach.     

Controlled Space Radiation concept for mesh-free semi-analytical technique to model wave fields in complex geometries

Numerical modelling of the ultrasonic wave propagation is important for Structural Heath Monitoring and System Prognosis problems. In order to develop intelligent and adaptive structures with embedded damage detector and classifier mechanisms, detailed understanding of scattered wave fields due to anomaly in the structure is inevitably required. A detailed understanding of the problem demands a good modelling of the wave propagation in the problem geometry in virtual form. Therefore, efficient analytical, semi-analytical or numerical modelling techniques are required. In recent years a semi-analytical mesh-free technique called Distributed Point Source Method (DPSM) is being used for modelling various ultrasonic, electrostatic and electromagnetic wave field problems. In the conventional DPSM approach point sources are placed along the transducer faces, problem boundaries and interfaces to model incident and scattered fields. Every point source emits energy in all directions uniformly. Source strengths of these 360° radiation sources are obtained by satisfying interface and boundary conditions of the problem. In conventional DPSM modelling approach it is assumed that the shadow zone does not require any special consideration. 360° Radiation point sources should be capable of properly modelling shadow zones because all boundary and interface conditions are satisfied. In this paper it is investigated how good this assumption is by introducing the ‘shadow zone’ concept at the point source level and comparing the results generated by the conventional DPSM and by this modified approach where the conventional 360° radiation point sources are replaced by the Controlled Space Radiation (CSR) sources.     

BPM-FSRM混合法分析SOI脊形波导与光纤耦合

用束传播-自由空间辐射模（BPM-FSRM）混合法计算了SOI脊形波导和光纤耦合时的透射率, 提出计算反射率的积分公式. 将该混合法和一般FSRM、菲涅尔公式-重叠积分法的计算结果相比较, 提出只有在弱导条件下, 传统的菲涅尔公式法和重叠积分法才可以同时使用.     

激光诱导等离子体的实验研究及其在光谱分析中的应用

综述了近几年国内外在激光诱导等离子体方面的实验研究进展 ,及其在光谱分析中的应用。着重阐明了在不同的条件下 (气体种类、环境气压、激光能量、波长、脉宽、功率密度、观测高度 )激光诱导等离子体的形成、辐射、电子温度、电子密度和扩散速度方面的实验研究 ;另外 ,激光诱导等离子体用于物质成分分析中 ,主要阐述了直接采集等离子体的辐射进行固态、液态和气态样品的分析以及激光烧蚀与ICP光源联用进行的光谱化学分析两个方面 ,并对影响分析精确度和检出限的因素进行了简要讨论     

上层大气中铁质流星尾迹的紫外光谱模拟

基于 Sparrow理论 ,计算了海拔 90— 95 km高空的不同初始地心坐标速度的典型铁质流星的有效温度 ,获得初速 72 km/ s的该类流星尾迹主要成分的粒子数密度 ,以 Cloudy程序模拟了该流星尾迹的 2 0 0—4 0 0 nm波段紫外辐射 ,给出了若干预期的强谱线的相对强度     

Quantification of radiation induced crosslinking in a commercial, toughened silicone rubber, TR55 by H MQ-NMR

Radiation induced degradation in a commercial, filled silicone composite has been studied by SPME/GC-MS, DMA, DSC, swelling, and multiple quantum NMR. Analysis of volatile and semi-volatile species indicates degradation via decomposition of the peroxide curing catalyst and radiation induced backbiting reactions. DMA, swelling, and spin-echo NMR analysis indicate an increase in crosslink density of near 100% upon exposure to a cumulative dose of 250 kGray. Analysis of the sol fraction via Charlesby-Pinner analysis indicates a ratio of chain scission to crosslinking yields of 0.38, consistent with the dominance of the crosslinking observed by DMA, swelling and spin-echo NMR and the chain scissioning reactions observed by MS analysis. Multiple quantum NMR has revealed a bimodal distribution of residual dipolar couplings near 1 krad/s and 5 krad/s in an approximately 90:10 ratio, consistent with bulk network chains and chains associated with the filler surface. Upon exposure to radiation, the mean 〈Ω_d〉 for both domains and the width of both domains increased. The MQ-NMR analysis provided increased insight into the effects of ionizing radiation on the network structure of silicone polymers.