一种用于空气中二氧化碳现场测定的新方法

一种用于空气中二氧化碳现场测定的新方法于爱民，杨广德，王锐，金钦汉（吉林大学化学系，长春１３００２３）关键词微波诱导等离子体，离子化检测器，气相色谱仪，二氧化碳二氧化碳在植物生长代谢及其生态平衡过程中起着重要作用，现场测定二氧化碳是目前农业、环境科学...     

Process study of thermal plasma chemical vapor deposition of diamond,part II: Pressure dependence and effect of substrate pretreatment

The effect of pressure during thermal plasma chemical vapor deposition of diamond films has been investigated for a pressure range from 100 to 760 Torr. The maximum growth rate in our experiments occurs at 270 Torr for substrate temperatures around 1000°C. The existence of an optimum pressure for diamond deposition may he related to the balance between generation and recombination of atomic hydrogen and carbon-containing active species in front of the substrate. To estimate the concentrations of atomic hydrogen and methyl radicals under thermal plasma conditions, calculations based on thermodynamic equilibrium have been performed. This approximate evaluation provides useful guidelines because rapid diffusion results in a near frozen chemistry within the boundary layer. The effect of substrate pretreatment on diamond deposition depends on the type of substrate used. Two growth modes have been observed-layer growth and island growth of diamond crystals on various substrates. Screw dislocations have been observed in diamond deposition in thermal plasmas, and defects such as secondary nucleations are more concentrated along (III) directions than along (100) directions.     

Effects of polymer architecture and composition on the adhesion of poly(tetrafluoroethylene).

Poly(glycidyl methacrylate), PGMA, chains in linear and arborescent structures were incorporated onto surfaces of poly(tetrafluoroethylene), PTFE, films by hydrogen plasma and ozone treatment and atom transfer radical polymerization. The epoxide groups of the PGMA chains were further reacted with acetic acid (AAc), oxalic acid (XAc), allyl amine (AA), and ethylenediamine (EDN) to introduce hydroxyl and amine groups to the surfaces of the PTFE films. Surface characterizations performed by Fourier Transform infrared attenuated total reflectance (FTIR-ATR) spectroscopy and X-ray photoelectron spectroscopy (XPS) confirmed the surface modification and the chemical structure. The PGMA chains in arborescent structures show a high effectiveness for the enhancement of the adhesion of PTFE films. The adhesion of PTFE films was also significantly enhanced by ring-opening reactions of the PGMA epoxide groups with acetic acid and amine compounds. A high value of 9.5 N cm(-1) in the optimum 180 degrees peel strength test was observed with PTFE/copper assemblies.     

New Method to Calculate Thermodynamic and Transport Properties of a Multi-Temperature Plasma: Application to N2 Plasma

Multi-temperature thermal plasmas have often to be considered to account for the nonequilibrium effects. Recently André et al. have developed the calculation of concentrations in a multi-temperature plasma by artificially separating the partition functions into a product by assuming that the excitation energies are those of the lower levels (electronic, vibration, and rotation). However, at equilibrium, differences, increasing with temperature, can be observed between partition functions calculated rigorously and with their method. This paper presents a modified method where it has been assumed that the preponderant rotational energy is that of the vibrational level v=0 of the ground electronic state and the preponderant vibrational energy is that of the ground electronic state. The internal partition function can then be expressed as a product of series expressions. At equilibrium for N ₂ and N ₂ ⁺ partition functions the values calculated with our method differ by less than 0.1% from those calculated rigorously. The calculation has been limited to three temperatures: heavy species T_h , electrons T_e , and vibrational T _v temperatures. The plasma composition has been calculated by minimizing the Gibbs free enthalpy with the steepest descent numerical technique. The nonequilibrium properties have been calculated using the method of Devoto, modified by Bonnefoi and Aubreton. The ratio =T_e/T_h was varied between 1 and 2 as well as the ratio _v =T _v /T _h for a nitrogen plasma. At equilibrium the corresponding equilibrium transport properties of Ar and N ₂ are in good agreement with those of Devoto and Murphy except for T>10,000 K where we used a different interaction potential for N–N ⁺ . The effects of _v and _e on thermodynamic and transport properties of N ₂ are then discussed.     

Two-Temperature Transport Coefficients in Argon–Hydrogen Plasmas—I: Elastic Processes and Collision Integrals

The calculation of two-temperature transport coefficients in an argon–hydrogen plasma at atmospheric pressure is performed using a new theory of two-temperature transport properties recently presented. The latter takes into account the coupling between electrons and heavy species, coupling neglected in the already existing theories of Devoto and Bonnefoi. Transport coefficients are calculated at two-temperatures, the kinetic temperature of electrons T_e being different from that of heavy species T_h. This paper is divided into two parts. The first one is related to elastic processes and its aim is to compare the results obtained with this new theory for viscosity , translational thermal conductivities ^tr _e and ^tr _h and electrical conductivity with the previous results of Bonnefoi. The composition is calculated with the modified equilibrium constant of van de Sanden et al. and the most recent interaction potential are discussed. As it could be expected the electron translational thermal conductivity and the electrical conductivity calculated when taking into account or not the coupling between electrons and heavy species show non-negligible discrepancies. Besides this comparison, the results also show the drastic influence of the non-equilibrium parameter =T_e/T_h on the values of , , ^tr _e, and ^tr _h.     

A Three-Dimensional Two-Phase Model for Thermal Plasma Chemical Vapor Deposition with Liquid Feedstock Injection

In this paper, a comprehensive model for thermal plasma chemical vapor deposition (TPCVD) with liquid feedstock injection is documented. The gas flow is assumed to be steady, of a single temperature. Radiation and charged species contributions are excluded, but extensive homogeneous and heterogeneous chemistry is included. The liquid phase is traced by considering individual droplets. Discussion on the model's application to diamond production from acetone in a hydrogen–argon plasma is included. The major conclusions are: (1) Liquid injection possesses a capability to deliver the hydrocarbon precursor directly onto the deposition target. (2) For the case of complete evaporation of the droplet before reaching the substrate, the deposition rate is similar to that obtained with gaseous precursors. (3) The computational results compare well with experimental data. The modeling results can be used to optimize the injection parameters with regard to the deposition rate.     

Neutral oxygen atom density in the MESOX air plasma solar furnace facility

The density of neutral oxygen atoms in the MESOX set-up, one device of the PROMES-CNRS solar facilities, was determined by a fiber-optics catalytic probe (FOCP). Plasma was created in a flowing air within a quartz tube with the outer diameter of 5 cm by a 2.45 GHz microwave generator with the output power up to 1000 W. The flow of air was varied between 4 and 20 l/h. The O-atom density was found to increase monotonously with the increasing discharge power, and it decreased with the increasing flow rate. The degree of dissociation of oxygen molecules in the plasma column depended largely on the flow rate. At the air flow of 4 l/h it was about 80% but it decreased to about 20% at the flow of 20 l/h.     

C_πB~-的激光等离子体产生与质谱分析

随着“足球烃”C_(60)及其他“球碳烃”的发现,以及对它们奇妙的结构与化学行为的不断揭示,碳原子簇的产生与研究已成为当前化学界的一个热门课题.Smalley等最近又将C_(60)中的一个碳原子以硼原子取代,成为Lewis酸,使这方面的研究更加深入。近二年来,我们在自制的装置上对碳原子簇的结构作了较为充分的研究后,又以独特的方式产生了链状构型的C_nB~-,记录了它们的负离子质谱。