Simultaneous measurement of SO2 and NO2 concentration using an optical fiber-based LP-DOAS system

SO2 and NO2 are the most important pollution in atmosphere.An optimized long path(LP)differential optical absorption spectroscopy(DOAS)system of high light intensity at an ultraviolet(UV)wavelength is proposed and used to measure the concentration of SO2 and NO2 simultaneously.In contrast to the traditional DOAS,the system adopted a Y-type optical fiber structure instead of a combination of mirrors in the telescope.The UV light intensity test shows that the light intensity of UV can arrive to above 80% of the max measuring range when the light path reaches 135 m,and the integral time of the spectrograph is only 15 ms.The system is proved to be efficacious through laboratory calibration.The maximum error of SO2 calibration is 4.19%,and is 5.22% for NO2.The error of the SO2 and NO2 mixture calibration is within 10%.Field measurement is implemented in a wastewater treatment plant in winter.The measurement light path is 738 m.The concentration of SO2 varies from 6μg/m^3(2.26 ppb)to 20μg/m^3(7.52 ppb),and the concentration of NO2varies from 100μg/m^3(53.2 ppb)to 200μg/m^3(106.4 ppb)approximately.The results are in accordance with the data from a monitoring station nearby in magnitude order and variation tendency mostly.     

基于CEEMD的重大事件对香港住宅价格影响的实证分析

应用互补集成经验模态分解（CEEMD）方法对香港1997―2018年的住宅价格月度数据进行了分解，将经过重构后的数据分成高频序列、低频序列与残差项。将BP多断点检测应用于低频序列，并结合样本时段内的重大事件进行实证分析。结果表明：1997年亚洲金融风暴对房价的影响大于2008年金融危机；外部经济体的救市政策间接地影响香港房价；在经济不景气的大环境下“孙九招”政策没有立即见效；资本投资者入境计划、住房供给调整与按揭贷款调整对房价的影响较为显著；税收调整对房价影响不显著、对交易量影响显著；SARS爆发使住宅价格下降约1%。     

高效液相色谱手性固定相法拆分BETTI碱及其衍生物对映体

在纤维素三（3,5-二甲基苯基氨基甲酸酯）（Chiralcel OD-H）和Pirkle型(R, R)-Whelk-O1手性柱上对手性氨基酚1-(α-氨基苄基)-2-萘酚（Betti 碱）及其衍生物1-(α-苄氨基苄基)-2-萘酚和1-(α-哌啶基苄基)-2-萘酚对映体分离进行了研究，分别考察了在正己烷流动相中，碱性添加剂、醇类添加剂的种类和浓度对手性拆分的影响。结果表明：溶质在Chiralcel OD-H柱上的分离效果好，而在(R, R)-Whelk-O1手性柱上只有1-(α-苄氨基苄基)-2-萘酚部分分离。研究了空间立体结构因素对手性分离的影响，初步探讨和比较了溶质在这2种手性柱上的手性识别机理。发现对(R, R)-Whelk-O1柱，溶质与固定相之间的吸引作用很小，而对于Chiralcel OD-H柱，溶质在手性空腔中的空间适应性很可能是手性识别的关键。     

基于图像的二维剪纸自动生成方法

中国剪纸的设计极具挑战性, 要求画面简洁、直观, 还需要表达特定的文化内涵, 且整张剪纸须整体连通。提出了一种基于图像的二维剪纸自动生成方法, 能够将任意数码照片自动转化为剪纸图形。首先，利用图像分割方法建立区域连接图; 接着, 基于该连接图对颜色、边界对比度和区域连通性进行数学建模, 并获得优化目标函数; 最后, 通过模拟退火算法求解目标方程, 自动生成保持图像内容的剪纸图形。还开发了连通性后处理和区域指定等用户交互工具, 允许用户在自动生成的剪纸图形中方便地加入个人设计。实验表明, 所生成的剪纸图形画面简洁、整体连通。 本方法在降低剪纸设计难度的同时还可满足个性化的设计需求, 有助于传播和传承我国的民间剪纸艺术。     

基于故事情景链语法的偶动画短片分析与建模

偶动画是动画领域一个重要的分支，与传统手绘动画同步出现，甚至更早。偶动画作品以其独特的拍摄方法和艺术魅力，为众多艺术家和观众所喜爱。偶动画影片设计周期长、工作量大、生产过程复杂、经济风险高，用传统手工工艺制作完成一部5 min的定格动画影片，通常需要数年。本文以丹麦知名动画导演克里多夫·皮拉丹的《柏树山上的风》及德国格里高利·祖坎导演的《龙焰火枪》为例，提出以故事情节(storyline(i)),?i∈1,2,…,n?与情景链（scenario?chain）语法有限集的形式语言表达式分解偶动画电影的故事元素，通过叙事空间（narrative?space）中镜头画面的组接逻辑，形成不同叙事结构，以分析定格动画电影的故事寓意（implied?meaning），从故事计算的角度将其转化为标准化设计流程，为构建偶动画电影故事建模理论以及辅助智能计算提供思路，方法提高了偶动画电影的设计与制作效率，为多学科协同创作提供了新模式，使普通偶动画爱好者也能参与创作。     

Free control of far-field scattering angle of transmission terahertz wave using multilayer split-ring resonators’ metasurfaces

To enhance transmission efficiency of Pancharatnam–Berry (PB) phase metasurfaces, multilayer splitring resonators were proposed to develop encoding sequences. As per the generalized Snell’s law, the deflection angle of the PB phase encoding metasurfaces depends on the metasurface period’s size. Therefore, it is impossible to design an infinitesimal metasurface unit; consequently, the continuous transmission scattering angle cannot be obtained. In digital signal processing, this study introduces the Fourier convolution principle on encoding metasurface sequences to freely control the transmitted scattering angles. Both addition and subtraction operations between two different encoding sequences were then performed to achieve the continuous variation of the scattering angle. Furthermore, we established that the Fourier convolution principle can be applied to the checkerboard coded metasurfaces.     

Preparation of two-dimensional molybdenum disulfide for NO2 detection at room temperature

In this work, the two-dimensional MoS₂ film was prepared by sulfuring the molybdenum atomic layer on SiO₂/Si substrate. The reaction temperature, heating rate, holding time and carrier gas flow rate were investigated comprehensively. The quality of MoS₂ film was characterized by optical microscopy, atomic force microscopy, Raman and photoluminescence spectroscopy. The characterization results showed that the optimum synthesis parameters were heating rate of 25 °C/min, reaction temperature of 750 °C, holding time of 30 min and carrier gas velocity of 100 sccm. The MoS₂ gas sensor was fabricated and its gas sensing performance was tested. The test results indicated that the sensor had a good response to both reducing gas (NH₃) and oxidizing gas (NO₂) at room temperature. The sensitivity to 100 ppm of NO₂ was 31.3%, and the response/recovery times were 4 s and 5 s, respectively. In addition, the limit of detection could be as low as 1 ppm. This work helps us to develop low power and integrable room temperature NO₂ sensors.     

Tuning the Reactivities of the Heteronuclear [AlnV3−nO7−n]+ (n=1, 2) Cluster Oxides towards Methane by Varying the Composition of the Metal Centers

The thermal gas-phase reactions of [Al₂VO₅]⁺ and [AlV₂O₆]⁺ with methane have been explored by using Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometry complemented by high-level quantum chemical calculations. Both cluster ions chemisorbed methane as the major reaction channels at room temperature. [Al₂VO₅]⁺ could break only one C−H bond to liberate CH₃, whereas [AlV₂O₆]⁺ exhibited higher oxidizing ability such that it brings about the selective generation of formaldehyde. Mechanistic aspects are revealed and the crucial roles of the metal centers are discussed.     

Substituent engineering in g-C3N4/COF heterojunctions for rapid charge separation and high photo-redox activity

Science China Chemistry - The heterojunction constructed of covalent organic frameworks (COFs) with adjustable structure and other photocatalysts has great potential in the field of photocatalysis....     

Double-Shelled C@MoS2 Structures Preloaded with Sulfur: An Additive Reservoir for Stable Lithium Metal Anodes

The growth of Li dendrites hinders the practical application of lithium metal anodes (LMAs). In this work, a hollow nanostructure, based on hierarchical MoS₂ coated hollow carbon particles preloaded with sulfur (C@MoS₂/S), was designed to modify the LMA. The C@MoS₂ hollow nanostructures serve as a good scaffold for repeated Li plating/stripping. More importantly, the encapsulated sulfur could gradually release lithium polysulfides during the Li plating/stripping, acting as an effective additive to promote the formation of a mosaic solid electrolyte interphase layer embedded with crystalline hybrid lithium-based components. These two factors together effectively suppress the growth of Li dendrites. The as-modified LMA shows a high Coulombic efficiency of 98 % over 500 cycles at the current density of 1 mA cm⁻². When matched with a LiFePO₄ cathode, the assembled full cell displays a highly improved cycle life of 300 cycles, implying the feasibility of the proposed LMA.