双矿化剂对合成ZSM-5分子筛酸性和织构特征及其甲醇转化制丙烯催化性能的影响

采用静态水热法在F^--OH^-体系中,以四丙基氢氧化铵为模板剂、偏铝酸钠为铝源、正硅酸乙酯为硅源,合成了纳米SiO₂-ZSM-5分子筛,考察了F^-/Al₂O₃物质的量比对所合成的ZSM-5分子筛织构性质和甲醇转化制丙烯催化性能的影响。结果发现,随着初始溶胶F^-/Al₂O₃物质的量比的增大,产物中SiO₂的含量增大,ZSM-5分子筛的相对结晶度有所降低;同时,分子筛的比表面积和孔容减小、酸强度降低、酸量减少。对于甲醇转化制丙烯,最佳F^-/Al₂O₃物质的量比为12;此时,丙烯选择性高于45%,丙烯/乙烯（P/E）比值大于10。反应机理分析表明,过渡态择形选择性是控制烯烃选择性的重要因素。     

High electro-catalytic graphite felt/MnO<Subscript>2</Subscript> composite electrodes for vanadium redox flow batteries

A mild and simple synthesis process for large-scale vanadium redox flow batteries (VRFBs) energy storage systems is desirable. A graphite felt/MnO₂ (GF-MNO) composite electrode with excellent electrocatalytic activity towards VO²⁺/VO₂⁺ redox couples in a VRFB was synthesized by a one-step hydrothermal process. The resulting GF-MNO electrodes possess improved electrochemical kinetic reversibility of the vanadium redox reactions compared to pristine GF electrodes, and the corresponding energy efficiency and discharge capacity at 150 mA cm^?2 are increased by 12.5% and 40%, respectively. The discharge capacity is maintained at 4.8 A h L^?1 at the ultrahigh current density of 250 mA cm^?2. Above all, 80% of the energy efficiency of the GFMNO composite electrodes is retained after 120 charge-discharge cycles at 150 mA cm^?2. Furthermore, these electrodes demonstrated that more evenly distributed catalytic active sites were obtained from the MnO₂ particles under acidic conditions. The proposed synthetic route is facile, and the raw materials are low cost and environmentally friendly. Therefore, these novel GFMNO electrodes hold great promise in large-scale vanadium redox flow battery energy storage systems.     

N-type doping of GaN/Si(1 1 1) using Al0.2Ga0.8N/ALN composite buffer layer and Al0.2Ga0.8N/GaN superlattice

The characteristics of Si-doped and undoped GaN/Si(1 1 1) heteroepitaxy with composite buffer layer (CBL) and superlattice are compared and discussed. While as-grown Si-doped GaN/Si(1 1 1) heteroepitaxy shows lower quality compared to undoped GaN, crack-free n-type and undoped GaN with the thickness of 1200 nm were obtained by metalorganic chemical vapor deposition (MOCVD). In order to achieve the crack-free GaN on Si(1 1 1), we have introduced the scheme of multiple buffer layers; composite buffer layer of Al_0.2Ga_0.8N/AlN and superlattice of Al_0.2Ga_0.8N/GaN on 2-in. Si(1 1 1) substrate, simultaneously. The FWHM values of the double-crystal X-ray diffractometry (DCXRD) rocking curves were 823 arcsec and 745 arcsec for n-GaN and undoped GaN/Si(1 1 1) heteroepitaxy, respectively. The average dislocation density on GaN surface was measured as 3.85×10⁹ and 1.32×10⁹ cm⁻² for n-GaN and undoped GaN epitaxy by 2-D images of atomic force microscopy (AFM). Point analysis of photoluminescence (PL) spectra was performed for evaluating the optical properties of the GaN epitaxy. We also implemented PL mapping, which showed the distribution of edge emission peaks onto the 2 inch whole Si(1 1 1) wafers. The average FWHMs of the band edge emission peak was 367.1 and 367.0 nm related with 3.377 and 3.378 eV, respectively, using 325 nm He-Cd laser as an excitation source under room temperature.     

On the equivalence of acidic centers in H-beta zeolites tested by Fries rearrangement of phenyl acetate

The heterogeneously catalyzed liquid phase Fries rearrangement reaction of phenyl acetate was carried out on Beta zeolites reexchanged with different amounts of metal cations. The aim of this work was to determine the influence of the amount of Brønsted acid sites as the catalytic active centers on the conversion. Sodium and potassium ions as well as divalent calcium and zinc ions were used in the reexchange procedure. The conversion shows a linear dependency on the degree of ion reexchange following the theoretically expected values. So the results prove that the bridged hydroxyl groups are indeed the dominating active centers and that their strength seems to be independent of the degree of reexchange; consequently, their acidic strength should be identical. A special emphasis was placed on the reexchange with divalent metal ions. It was shown that one divalent ion is not able to replace two protons as is supposed to be necessary for the charge balance—so a 1:1 stoichiometry is needed to assume to explain the catalytic results.     

Multiple Dynamic Bonds-Driven Integrated Cathode/Polymer Electrolyte for Stable All-Solid-State Lithium Metal Batteries

All-solid-state lithium metal batteries (LMBs) are considered as the promising higher-energy and improved-safety energy-storage systems. Nevertheless, the electrolyte-electrodes interfacial issues due to the limited solid physical contact lead to discontinuous interfacial charge transport and large interfacial resistance, thereby suffering from unsatisfactory electrochemical performance. Herein, we construct an integrated cathode/polymer electrolyte for all-solid-state LMBs under the action of polymer chains exchange and recombination originating from multiple dynamic bonds in our well-designed dynamic supramolecular ionic conductive elastomers (DSICE) molecular structure. The DSICE acts as polymer electrolytes with excellent electrochemical performance and mechanical properties, achieving the ultrathin pure polymer electrolyte thickness (12 μm). Notably, the DSICE also functions as lithium iron phosphate (LiFePO₄, LFP) cathode binders with enhanced adhesive capability. Such well-constructed Li|DSICE|LFP-DSICE cells generate delicate electrolyte-electrodes interfacial contact at the molecular level, providing continuous Li⁺ transport pathways and promoting uniform Li⁺ deposition, further delivering superior long-term charge/discharge stability (>600 cycles, Coulombic efficiency, >99.8 %) and high capacity retention (80 % after 400 cycles). More practically, the Li|DSICE|LFP-DSICE pouch cells show stable electrochemical performance, excellent flexibility and safety under abusive tests.     

Novel hot-melting hyperbranched poly（ester-amine） bearing self-complementary quadruple hydrogen bonding units

Hyperbranched poly（amine-ester）s bearing self-complementary quadruple hydrogen bonding units display excellent mechanical and temperature-dependent melt rheological properties, which make them suitable as novel hot-melting materials.     

Dehydration performance of a hydrophobic DD3R zeolite membrane

The all silica DDR membrane turns out to be well suited to separate water from organic solvents under pervaporation conditions, despite its hydrophobic character. All-silica zeolites are chemically and hydrothermally more stable than aluminum containing ones and are therefore preferred for membrane applications, including for dehydration, even though these type of membranes are hydrophobic. Permeation of water, ethanol and methanol through an all-silica DDR membrane has been measured at temperatures ranging from 344 to 398 K. The hydrophobic membrane shows high water fluxes (up to 20 kg m⁻² h⁻¹). The pure water permeance is insensitive to temperature and is well described assuming weak adsorption. Excellent performance in dewatering ethanol (N=2$N=2$ kg m⁻² h⁻¹and _αw=1500${\alpha }_{\text{w}}=1500$ at 373 K and _xw=0.18$x_{\text{w}}=0.18$) is observed and the membrane is also able to selectively remove water from methanol (N=5$N=5$ kg m⁻² h⁻¹ and _αw=9${\alpha }_{\text{w}}=9$). Water could also be removed from methanol/ethanol/water (_αwater_/EtOH=1500${\alpha }_{\text{water}/\text{EtOH}}=1500$, _αMeOH_/EtOH=70${\alpha }_{\text{MeOH}/\text{EtOH}}=70$ at 373 K) mixtures, even at water feed concentrations below 1.5 mol%.     

Porous carbon-coated graphite electrodes for energy production from salinity gradient using reverse electrodialysis

Performance of graphite foil electrodes coated by porous carbon black (i.e., Vulcan) was investigated in comparison with metal electrodes for reverse electrodialysis (RED) application. The electrode slurry that was used for fabrication of the porous carbon-coated graphite foil is composed of 7.2 wt% of carbon black (Vulcan X-72), 0.8 wt% of a polymer binder (polyvinylidene fluoride, PVdF), and 92.0 wt% of a mixing solvent (dimethylacetamide, DMAc). Cyclic voltammograms of both the porous carbon (i.e., Vulcan)-coated graphite foil electrode and the graphite foil electrode without Vulcan showed good reversibility in the hexacyanoferrate(III) (i.e., Fe(CN)₆³⁻) and hexacyanoferrate(II) (i.e., Fe(CN)₆⁴⁻) redox couple and 1 M Na₂SO₄ at room temperature. However, anodic and cathodic current of the Vulcan-coated graphite foil electrode was much higher than those of the graphite foil electrode. Using a bench-scale RED stack, the current–voltage polarization curve of the Vulcan-coated graphite electrode was compared to that of metal electrodes such as iridium (Ir) and platinum (Pt). From the results, it was confirmed that resistance of four different electrodes increased with the following order: the Vulcan-coated graphite foil<the Ir-coated titanium (Ti) mesh<the Pt-coated Ti plate<the graphite foil. Moreover, the Vulcan-coated graphite foil showed 5–10% higher power density than the metal mesh electrodes. From the polarization curve of the Vulcan-coated graphite foil electrode, it was found that total resistance decreased as thickness and geometric surface area of the electrode increased.     

Luminescent Properties of a Polymer Photoluminescent Composite Containing the Binuclear (EU,TB) Complex as an Emitter

Uninuclear europium (Eu), as well as binuclear Eu and terbium (Tb), complexes were synthesized using acrylic acid (AA) as the first ligand and 1,10-phenanthroline (Phen) as the second ligand. The relative weight ratio of the europium (III) (Eu³⁺) to terbium (III) (Tb³⁺) ions of the binuclear complex was 1:1 as determined via energy dispersive X-ray analysis. The structures of the Eu(AA)₃Phen and Eu_0.5Tb_0.5(AA)₃Phen complexes were characterized by Fourier transform infrared spectroscopy. A series of tri-cellulose acetate (TCA)/ the Eu(AA)₃Phen and TCA/Eu_0.5Tb_0.5(AA)₃Phen composites were prepared by solution blending, and their luminescent properties were investigated by fluorescence spectrophotometry. The excitation spectra of all composites indicated that the TCA matrix probably affected the energy absorption and transfer of organic ligands. In TCA/Eu_0.5Tb_0.5(AA)₃Phen composites the introduced Tb³⁺ ions had some influence on energy absorption and transfer of organic ligands; the energy transfer process of the complex is suggested to be as follows: Phen→AA→Tb³⁺ion→Eu³⁺ion. The emission spectra indicated that the luminescent intensity of the TCA/Eu_0.5Tb_0.5(AA)₃Phen composites was noticeably stronger than that of the TCA/Eu(AA)₃Phen composites, suggesting that the comparatively stable and high-efficiency energy transfer process was only slightly influenced by the TCA matrix. In summary, the TCA/Eu_0.5Tb_0.5(AA)₃Phen (90/10) composite possesses fine luminescent properties for potential usage as red fluorescent materials.     

<Emphasis Type="Italic">N</Emphasis>-(4-(quinazolin-2-yl)phenyl)benzamide derivatives with potent anti-angiogenesis activities: synthesis and evaluation

Expanding our studies on the anti-angiogenesis activities of 2,4-disubstituted quinazoline derivatives [8], a series of novel N-(2-(quinazolin-2-yl)phenyl)benzamide (SZ) derivatives were designed and synthesized. Cytotoxicity assays indicated that most of these compounds displayed similar cytotoxicity against tumor cells in comparison with our previously reported, but showed a higher cytotoxicity against HUVECs. The SZ derivatives showed a remarkable inhibitive effect against the migration and adhesion of HUVECs, in addition to demonstrating significant in vivo anti-angiogenesis activities in the chick embryo chorioallantoic membrane (CAM) assay. The results proved that the introduction of an aryl group with a basic amide side chain on the 4′ position linked to the amide of the C-2 substituted quinazoline scaffold is an effective approach to improve the anti-angiogenic activity of quinazoline derivatives.