用光栅衍射法测试液体表面张力

利用π型直线状振源，在待测液面产生正弦形表面驻波，将其作为一种理想的反射式光栅，通过对激光束的衍射，形成线阵衍射光斑．借助LCCD等硬件测试系统及相应的数据采集与处理系统，实时准确地测量液体表面张力。     

热传导型半导体瞬态问题特征变网格有限元法及其分析

热传导型半导体器件的瞬时状态由四个方程的非线性偏微分方程组的初边值问题所决定，其中电子位势方程是椭圆型的，电子和空穴浓度方程是对流扩散型的，温度方程为热传导型的。本文提出解这类问题的特征变网格有限元法，并进行了理论分析，在一定条件下，得到了某种意义下的最佳L^2误差估计结果。     

Efficient Visible Electroluminescence from Porous Silicon Diodes Passivated by Carbon Films

By using n-butylamine as a carbon resource,carbon film is deposited on the p-n porous silicon (PS) surface with a radio-frequency glow discharge plasma system.Raman spectra and infrared reflection (IR) spectra of the carbon films indicate that there are amine-group and hydrogen atoms therein.The IR spectra of the passivated PS samples exhibit that the PS surfaces are mainly covered with Si-C,Si-N and Si-O bonds.Electroluminescence (EL) spectra show that the EL intensity of the passivated PS diodes increases greatly and the blueshift of the EL peak occurs compared with the diodes without treatment.Both of these are stable while the passivated diodes are exposed to the air indoors.The I-V characteristics reveal that the passivated diodes have a smaller series resistance and a lower onset voltage.The influence of the carbon film passivation on EL properties of PS has also been discussed.The results have proven that carbon film passivation is a good way to enhance the PS luminescent intensity and stability.     

Photoluminescence Characterization of Silicon Nanoparticles Hybridized Europium Complex

A europium complex Eu (DBM)3 TPPO (Eu tris(benzoylmethide)-(triphenylphosphine oxide)) and silicon nanoparticles have been hybridized.The hybridization can evidently change the photoluminescence (PL) characteristics of the Eu complex in the following aspects:under an excitation of 390nm,the intensity of the PL peak at 611nm due to the ^5Du-^7F2 transition of the Eu^3 ions has been increased by 30%,and thc integrated PL intensity in the visible range has been increased by nearly 3 times;the PL excitation efficiency beyond 440nm has been improved cvidently;the peak in the PL excitation spectrum shifts from 408nm to 388nm,and the PL decay time decreases from 2.07 to 0.96μs,The experimental results indicatde that in the PL process,the photoexcited energy may transfer from the silicon nanoparticlcs to the Eu^3 ions.     

Ⅱ型平面动力裂纹线场的弹塑性精确解

本采用线场分析方法对理想弹塑性Ⅱ型平面应力裂纹裂纹线附近的应力场及弹塑性边界进行了精确分析，本完全放弃了小范围屈服条件，探讨了弹塑性边界上弹塑性应力场匹配条件的正确提法，通过将裂纹线附近塑性区应力场的通解（而不是过去采用的特解）与弹性应力场的精确解（而不是通常的裂尖应力强度因子Ｋ场）在裂纹线附近的弹塑性边界上匹配，本得出了塑性区应力场，塑性区长度及弹塑性边界的单位法向量在裂纹线附近的足够精确     

类锂硅离子软X射线激光研究

在激光等离子体典型参数条件下，利用碰撞－辐模型计算了类锂硅离子５ｆ－３ｄ和４ｆ－３ｄ跃的粒子数反转比率和激光增益系数。讨论了不同热带条件和不同冷却速度下，激光增益系统数的变化。计算结果表明，高功率，短脉冲激光生产的高温等离子体在快速冷却条件下能产生软Ｘ射的线激光增益。     

多孔硅制备过程中B,P杂质原子的作用

采用DV-Xα方法对多孔硅形成过程中位于表层的B和P杂质原子的作用进行研究,结果表明位于顶层硅原子层中的B和P杂质原子均可削弱其邻近的Si-Si键强度,因而可能导致出现腐蚀的突破点,再通过分析杂质对表面区势场的改变,可以认为位于顶层硅原子层中的B杂质原子产生腐蚀的突破点的可能性更大。 关键词：     

SrO－La_2O_3／CaO催化剂表面的碱性和催化行为Ⅰ．CO_2－TPD及进料中CO_2对催化行为的影响

添加ＳｒＯ使Ｌａ２Ｏ３／ＣａＯ催化剂的碱性增强及甲烷氧化偶联反应的Ｃ２产率提高，但反应温度随ＳｒＯ含量增加而升高．反应活性高的ＳｒＯ－Ｌａ２Ｏ３／ＣａＯ催化剂，容易被ＣＯ２中毒．催化剂失活的主要原因是表面活性位被碳酸盐覆盖．催化剂失活之前，反应气中添加ＣＯ２可抑制产物中ＣＯ２的生成，提高Ｃ２产率