应用于近距空空导弹惯导系统的传递对准技术

对应用于近距空空导弹捷联惯导系统的“长时”传递对准问题进行了讨论,分析了机载火控系统中建立“长时”惯性坐标系的原理和方法,并进行了长时传递对准卡尔曼滤波器的设计,在此基础上完成了初步的数学仿真.     

PARTICLE PROPERTIES—PROMISE AND NEGLECT

We see two major trends in Particle Technology. First, the focus is shifted from unit operations towards functional products, i.e. towards product engineering. Second, modeling will become more and more important. Processes cannot yet be designed from basic molecular understanding. Nanotechnology, however, begins to bridge this gap between molecules and particles and may thus open new ways not only for the production and handling of particulate matter but also for the engineered design of advanced material properties. Starting from the concept of product engineering we investigate the basic preconditions for tailoring nanoparticulate properties, i.e. the control of the particle interactions. Nanotechnology can only be transferred to industrial production if the interactions are effectively controlled. Material and particle properties are essential for predictive models. Although strong tools like MD, DEM or population balance models are available, these models are only predictive if realistic material and particle properties are available which is often not the case. We show for selected examples how particle properties can be obtained by studying the physically relevant elementary processes. The impact breakage behavior of many different materials is described by a master curve. Particle adhesion can be modeled if the roughness of particle and substrate and the Hamaker constant are known. The latter is obtained from adsorption studies.     

用于先进半导体制程的光刻反向计算技术(ILT)

此篇论文将介绍一个用于半导体光罩上图样设计以及可用于实际生产的光刻反向计算技术（ILT）。在论文中将讨论有关ILT的最新发展，包括在超成像极限协助图样（SRAF）的生成，可增加制程宽容度的ILT，以及如何生成满足光罩生产标准的图样等方面。从内部的研究结果和客户的使用结果可以看出，ILT已经不再只是一种用于研究的工具，而是已经可以用于先进半导体制程的大规模生产。在对各个环节优化之后，ILT可以增加制程的宽容度，同时将光罩的成本控制在可以接受的水平。     

飞机风挡结构抗鸟撞一体化设计技术研究

结合大型非线性有限元分析软件，实践了飞机风挡结构由初步设计、数值仿真以及实验验证的一体化设计过程，建立了适于风挡结构材料的非线性黏弹性本构计算接口程序，对合理选取单元类型、材料模型、边界条件影响以及试验设计等工作细节进行了深入研究，通过实验与仿真计算结果的对比，验证了数值仿真计算模型的精度．为飞机风挡的抗鸟撞结构设计-数值仿真-实验验证一体化技术提供了支持论证．     

PVDF应力测量技术及在混凝土冲击实验中的应用

介绍了使用PVDF(polyvinylidene fluoride,聚偏二氟乙烯)应力计的应力直接测量技术。在SHPB装置上进行自制PVDF应力计动态压电系数的标定实验,分析了应力集中、横向泊松效应、摩擦效应对PVDF应力计信号及动态压电系数的影响。用PVDF应力计进行了混凝土的冲击压缩实验。利用混凝土前后端面PVDF应力计信号分析了实验过程中混凝土试样的应力均匀性。与应变计直测应变技术相结合得到了混凝土的动态应力-应变关系。     

石英光纤探针在非金属材料冲击实验中的应用

使用石英光纤探针成功测量了Teflon样品中的冲击波速度和电炮加载的厚度为75 m的Mylar膜飞片的平均速度和到达时间一致性。实验证明,石英光纤探针技术为非金属材料的冲击实验提供了一种直接的、不受电磁干扰的、精确的测量手段。     

三维双材料结构的应力奇异性分析

应用有限单元法子模型技术，对具有不同界面角的三维双材料结构的应力奇异性进行了分析。结果表明，应用子模型技术估算三维双材料结构的应力奇异性指数是有效的。然后分析了界面端线和界面端点处附近奇异性指数，得到了一些重要而有趣的结果。最后对消除三维双材料结构应力奇异性的几何条件进行了讨论。     

机车曲轴镀铁修复疲劳对比试验研究

通过对镀铁修复后的机车曲轴的疲劳性能进行检测试验，同时给出参照的新曲轴的疲劳性能参数，比较分析原件性能和镀铁修复后的疲劳性能的差异，从而判断在原工作环境下镀铁修复后机车曲轴的工作寿命如何变化，试验中采用42CrMoA棒材及其镀铁修复件进行比较，给出了最大应力—疲劳寿命的S—N曲线，从实验数据可以分析，因长期使用轴径磨损的曲轴镀铁修复后，其疲劳性能将有部分损失，疲劳极限下降9．68%，这意味着在较大的疲劳应力下工作的镀铁修复后曲轴，其疲劳寿命低于原件，因此应进一步研究镀铁修复的曲轴在实际工况下的疲劳极限，并改善镀铁工艺，提高疲劳极限，使镀铁修复技术更好地应用于工程实际。     

第十四届国际近海与极地工程学术会议简介

国际近海与极地工程学术会议(International Offshore and Polar Engineering Conference)是每年一度由国际近海与极地工程学会主办的旨在促进近海工程、极地工程等领域的科技进步以及国际间学术交流与合作的大型国际学术会议．自1991年起，此会议相继在爱丁堡、旧金山、新加坡、大阪、海牙、洛杉矶、檀香山、蒙特利尔、法国的布雷斯特     

EFFECTS OF FINELY DISPERSED METALLIC PALLADIUM ON MICROSTRUCTURE AND PROPERTIES OF NANOCOMPOSITES PRODUCED BY SOL-GEL TECHNIQUE

Nanosized palladium particles were incorporated into mesoporous silica matrix to obtain nanocomposites using the sol-gel technique. Effects of the finely dispersed metallic palladium on the microstructure and properties of the nanocomposites were investigated. By means of X-ray diffraction and optical absorption, it was found that palladium particles were 5-9 nm in diameter and their uniform dispersion in the mesoporous silica depended on both the content of the palladium and the structural features of the silica matrix. The results showed that the mixing method of preparation led to wider size distribution of the nanosized particles as compared to the immersion method, but dispersed degree was reduced. Although the incorporation of nanosized palladium particles could not substantially induce significant structural changes of the matrix, the apparent red-shifted optical absorptions for the nanocomposites were observed as compared to the parent monolithic silica, particularly with increase in palladium loading and calcination temperature.