直线加速器中的非线性空间电荷效应和发射度增长

直线加速器中束团的非线性空间电荷效应是引起发射度增长的重要原因之一．根据计算在屏蔽筒中非均匀分布京团的空间电荷效应的普遍方法，推导了直线加速器圆波导中几种非均匀分布束团的非线性场能公式，并给出数值计算结果．讨论了由非线性所引起发射度增长．     

60微弧度激光发射天线模拟设计及测试

为了实现远距离激光能量传输,根据光学相差理论和优化的组合透镜设计,着重研究了影响激光发射天线发射的激光光束随望远光学系统离焦量的变化规律和初步的实验测试.实验中利用三级像差理论消除激光天线系统像差对离焦量控制精度的影响,在不同的距离,实现了远场激光光斑的测量.采用高斯曲线拟合法,消除CCD探测器的饱和影响,提高了远场激...     

Projectile fragment emission in the fragmentation of 56Fe on C,Al and CH2 targets at 471 A MeV

The emission angle and the transverse momentum distributions of projectile fragments produced in the fragmentation of 56Fe on CHs, C and A1 targets at 471 A MeV are measured. It is found that for the same target, the average value and width of the angular distribution decrease with an increase of the projectile fragment charge; for the same projectile fragment, the average value of the distribution increases and the width of the distribution decreases with increasing the target charge number. The transverse momentum distribution of a projectile fragment can be explained by a single Gaussian distribution and the averaged transverse momentum per nucleon decreases with the increase of the charge of projectile fragment. The cumulated squared transverse momentum distribution of a projectile fragment can be explained well by a single Rayleigh distribution. The temperature parameter of the emission source of the projectile fragment, calculated from the cumulated squared transverse momentum distribution, decreases with the increase of the size of the projectile fragment.     

可控偏振的量子点光发射

正瑞典研究人员已公布了一项计划,准备制造能发射线性偏振光的量子点。林雪平大学的Anders Lundskog及其同事通过在基部已加长的微型六角形氮化镓金字塔的顶部"种植"量子点,使氮化铟镓量子点所发射的光处于受控状态。他们发现,发射光的偏振方向与基部延长轴是一致的。通过调节氮化铟镓中的铟含量,原则上就可将由量子点发射的光从紫外线波长调到红外线波长。这种方法的好     

2D-C/SiC拉伸损伤的声发射信号聚类分析

摘要：对2D-C/SiC复合材料进行常温拉伸试验,利用声发射（AE）仪在线监测其损伤过程。应用K-均值聚类算法对AE信号进行模式识别,结合扫描电镜观察,发现2D-C/SiC复合材料拉伸过程的损伤模式包括基体开裂、界面层脱粘、层间剥离、纤维断裂以及纤维束断裂等,并得到了各种损伤模式AE信号参数的中心值。通过对不同损伤模式AE累积事件数和累积能量随时间变化的统计分析,描述了2D-C/SiC复合材料拉伸损伤演化过程。     

宽带磁共振T/R开关的设计与实现

磁共振系统中的发射/接收（transmit/receive,T/R）开关用于收发通路的切换,要求在隔离大功率信号的同时具有较小的插入损耗;另外,在宽带磁共振谱仪中,一般的窄带T/R开关也不再适用.本文基于PIN（positive-intrinsic-negative）二极管设计了工作频率为10~100 MHz的宽带磁共振T/R开关.通过减小电平跳变、优化开关过冲和解决二极管被动导通等问题,获得了插入损耗小于1 dB、大功率信号隔离度大于75 dB、开关时间1 μs的整体性能.用本文设计的宽带T/R开关替代一般探头中的窄带T/R开关,在0.5 T核磁共振（NMR）波谱仪上测得了氢核和氟核两个不同频率的磁共振信号,验证了宽带T/R开关的宽带性能.     

新型超支化聚(芴-co-吡啶并[3,2-b]吡嗪)共聚物的合成与发光性能

合成了新型三溴代的含有吡啶并[3,2-b]吡嗪的化合物, 通过Suzuki缩聚反应合成了以吡啶并[3,2-b]吡嗪为核, 以9,9-二辛基芴为枝的超支化共聚物. 该共聚物在甲苯和四氢呋喃等有机溶剂中具有较好的溶解性能. 采用共聚物制备了结构为ITO/PEDOT/polymer/Ca/Al的发光器件, 其中基于共聚物PFPQ-2的器件在电流密度为3.8 mA/cm²时得到蓝光发射, 最大外量子效率为1.29%, 最大亮度为1173 cd/m², 色坐标为(0.16, 0.11).     

A low-threshold and high-power oxide-confined 850-nm AlInGaAs strained quantum-well vertical-cavity surface-emitting laser

A low-threshold and high-power oxide-confined 850-nm AlInGaAs strained quantum-well (QW) vertical-cavity surface-emitting laser (VCSEL) based on an intra-cavity contacted structure is fabricated. A threshold current of 1.5 mA for a 22 μm oxide aperture device is achieved, which corresponds to a threshold current density of 0.395 kA/cm². The peak output optical power reaches 17.5 mW at an injection current of 30 mA at room temperature under pulsed operation. While under continuous-wave (CW) operation, the maximum power attains 10.5 mW. Such a device demonstrates a high characteristic temperature of 327 K within a temperature range from -12℃ to 96℃ and good reliability under a lifetime test. There is almost no decrease of the optical power when the device operates at a current of 5 mA at room temperature under the CW injection current.     

PEPT study of particle motion for different riser exit geometries

Laboratory and industrial risers are equipped with exits of many different layouts, and numerous publications discuss the influence of riser exit geometry on local and overall solids hydrodynamics in the riser. The present paper reviews literature findings--mostly based upon indirect experimental techniques and often somewhat contradictory, Direct measurement of particle velocity and particle occupancy near and in the riser exit provide a better indication of the effect of riser exit geometry. Positron Emission Particle Tracking （PEPT） was used in this work for the first time to investigate the exit region of the riser, An abrupt or sharp exit causes particles to be knocked out of the gas flow, so forming a recirculation or reflux region in the upper part of the riser. This is much less pronounced with a curved or gradual exit.