Naturally derived green bio-additives

During the last few years, special attention has been paid by the lubricant industry towards vegetable oil-based lubricants due to their biodegradability, renewability and excellent tribological properties. But to maintain the biodegradability of the final lubricants, the additive in the lubricants must also be biodegradable. Hence, in our present work, multifunctional lubricating oil additive based on castor oil has been investigated as a less toxic, feasible alternative to traditional petroleum based additives. Homopolymer of castor oil and its copolymer with α-pinene were synthesized by a thermal method using azobisisobutyronitrile as a radical initiator. Characterization of the prepared polymers was performed by spectral analysis and gel permeation chromatography (GPC). Additive performances of each of the prepared polymers as viscosity index improvers/viscosity modifiers and pour point depressants were carefully evaluated. Photo micrographic image was used to study the effectiveness of the additives as pour point depressants. Thermogravimetric analysis (TGA) was conducted to investigate the thermal response of the additives at high temperature. Finally, biodegradability of all the polymers was tested against fungal pathogen by the disc diffusion method and soil burial test. The study illuminated excellent additive performances of the polymers and thus their potential for acting as entirely naturally derived green bio-additives for lube oil.     

Density and Viscosity of Methanol + Trichloroethylene,n-Propanol + Trichloroethylene and n-Butanol + Trichloroethylene Mixtures

Abstract

Density and Viscosity measurements on the binary mixtures of methanol + trichloro-ethylene, n-propanol + trichloroethylene, and n-butanol + trichloroethylene binary mixtures at 303.15, 313.15 and 323.15K are reported. The representation of the data by simple mixing rules is also studied.     

基于油藏实际的稠油层内水热催化裂解机理研究

开展了稠油层内水热催化裂解技术在胜利油田的先导实验,五口井平均周期单井增油653 t,稠油初期降黏率达79.8%,措施14周后降黏率仍大于62%。利用Brookfield DV-Ⅲ黏度计、ElementarVario EL III元素分析仪、Knauer K-700蒸气压渗透仪、Agilent 6890N气相色谱仪和EQUINOX 55傅里叶变换红外光谱仪等,对措施前后稠油的物化性质进行分析。结果表明,层内水热催化裂解后稠油黏度及平均分子量减小、轻烃含量增加、重质组分含量减少、氢碳原子比增加、杂原子含量减小。稠油层内裂解反应受催化剂体系、高温水及储层矿物因素控制,催化剂是促进稠油裂解的主要因素,供氢剂及分散剂等助剂有助于提高裂解效果,高温水的酸碱性质及储层矿物对稠油具有催化裂解作用。多因素协同作用下使稠油发生脱侧链、分子链异构、断链、加氢、开环、成环、脱硫等系列反应,使得稠油大分子分解成小分子物质,降低了稠油黏度,改善了稠油品质,证实该技术在现场应用中具有可行性。     

On power-law fluids with the power-law index proportional to the pressure

In this short note we study special unsteady flows of a fluid whose viscosity depends on both the pressure and the shear rate. Here we consider an interesting dependence of the viscosity on the pressure and the shear rate; a power-law of the shear rate wherein the exponent depends on the pressure. The problem is important from the perspective of fluid dynamics in that we obtain solutions to a technologically relevant problem, and also from the point of view of mathematics as the analysis of the problem rests on the theory of spaces with variable exponents. We use the theory to prove the existence of solutions to generalizations of Stokes’ first and second problem.     

广义黏性逼近方法及其应用

黏性逼近方法在非扩张映射不动点问题的研究中扮演着重要的角色。提出了一类广义黏性逼近方法，在一定条件下，证明了该算法的收敛性.作为应用，将所得的收敛性结果应用于求解约束凸优化问题与双层优化问题。     

Solution properties,unperturbed dimensions,and chain flexibility of poly(1‐adamantyl acrylate)

Poly(1‐adamantyl acrylate) (PAdA) exhibits much higher glass transition and degradation temperatures than other polyacrylates. However, the quantitative evaluation of the stiffness of this polymer chain has not been reported previously. In this study, the dilute solution properties and conformational characteristics of PAdA were evaluated using viscometry and scattering techniques. The unperturbed dimensions of this polymer were evaluated using the Burchard–Stockmayer–Fixman extrapolation and the touched‐bead wormlike chain model. The PAdA chain has a comparable persistence length, diameter per bead and characteristic ratio to poly(methyl methacrylate) and polystyrene. All these results indicate that PAdA is less flexible than common polyacrylates. In addition, the second virial coefficients (A₂) of PAdA in different solvents obtained by static light scattering were compared. Among the solvents investigated, tetrahydrofuran is a moderate solvent. Radius of gyration of a polymer sample in the various solvents ranged from 16.8 to 30.3 nm. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1526–1531     

Viscosity-Temperature Behavior of Hydroxypropyl Cellulose Solution in Presence of an Electrolyte or a Surfactant: A Convenient Method to Determine the Cloud Point of Polymer Solutions

The viscosity of hydroxypropyl cellulose (HPC) solution with or without an additive has been measured continuously as a function of temperature with the help of a vibro-viscometer. The viscosity of the polymer solution showed a gradual decrease initially with increase in temperature until a particular point beyond which there was a sharp decrease in the viscosity, which coincided with the clouding of the solution. The cloud point temperature (CP) of the polymer solution was determined from the first derivative plot of viscosity vs. temperature. Effect of addition of an electrolyte or a surfactant on the CP of HPC solution has also been studied. While a decrease in CP of HPC solution in presence of fluoride, chloride, or bromide ions was observed, presence of iodide or thiocyanide ions led to an increase in the CP. However, presence of an ionic surfactant initially lowered the CP but beyond a particular surfactant concentration a sharp increase in cloud point was observed due to interaction of the surfactant with the polymer. The results suggest that surfactants with longer hydrophobic tail or more hydrophobic groups have more affinity for HPC.     

Miscibility and Thermal Behavior of Pullulan/Polyacrylamide Blends

Blends of Pullulan (PU) and Polyacrylamide (PAM) having biomedical applications were prepared and characterized in order to evaluate the miscibility of natural component with the synthetic one. Blends with different composition ratios were prepared using water as common solvent. Viscosity, ultrasonic velocity and density were measured at 30 and 40°C. Furthermore, the blend films were prepared by a solution casting method and analyzed by DSC, FTIR and TGA methods. Results of ultrasonic and density methods revealed the semi-miscibility of the blend. Using viscosity data, interaction parameters (Chee's ‘μ’ and Sun's ‘α’) were computed. The values confirmed that the blend is miscible when the Pullulan content is less than 20% in the blend. Change in temperature had no effect on the miscibility nature of the blends. Intermolecular interactions of hydrogen bonding type were confirmed by DSC and FTIR methods. Thermal behavior of blends was investigated using TGA method.     

A New Polymer Flooding Agent Prepared Through Intermacromolecular Complexation

Abstract

This paper reports a new polymer flooding agent used for enhanced oil recovery (EOR), poly(acrylamide-acrylic acid) [P(AM-AA)]/poly(acrylamide-dimethyldiallylammonium chloride) [P(AM-DMDAAC)] polyelectrolyte complex. The solution viscosity of prepared P(AM-AA)/P(AM-DMDAAC) complex is enhanced due to the strong interaction between the two oppositely charged copolymers, i.e., P(AM-AA) and P(AM-DMDAAC), which were prepared through radical copolymerization. The ionic content could be controlled by changing the reaction conditions. The structures of the two copolymers were characterized through FT-IR, ¹H NMR, and acidic and precipitation titration. The formation as well as the factors affecting the P(AM-AA)/P(AM-DMDAAC) polyelectrolyte complex were investigated by means of viscosity measuring and light transmittance testing. The experimental results show that the composition of the copolymers, the pH value, and the concentration of the polymer solutions have remarkable effects on the formation of P(AM-AA)/P(AM-DMDAAC) polyelectrolyte complex and the solution viscosity. When DMDAAC content in P(AM-DMDAAC) is 3.2 mol%, AA content in P(AM-AA) is 48–58 mol%, the weight ratio of P(AM-AA) to P(AM-DMDAAC) is 70/30–30/70, the pH value of the solution is 6–10, and the concentration of solution is 1000–3500 ppm, then a homogeneous solution of P(AM-AA)/P(AM-DMDAAC) poly-electrolyte complex could be obtained which exhibits a much higher solution viscosity compared with its components.     

Functions of Acyclic Poly(ethylene Oxide) Homologs: Acceleration of Nucleophilic Reactions and Selective Ion Transport through Membranes

The acceleration effect of poly(ethylene oxide) on nucleophilic reactions was investigated. The enhancement of the reaction rate was interpreted by the cooperative solvation of alkali metal ions with ethereal oxygens of PEO resulting in active nucleophilic anions. In relation to the complex formation of alkali metal ions with PEO, the oligo(ethylene oxide) derivatives were prepared as the synthetic ionophores, which were able to transport alkali metal ions selectively through a liquid membrane against the alkali metal ion concentration.