Zn2SiO4基体掺杂稀土离子纳米粉体的制备和光谱特性

采用sol-gel法在Zn2SiO4基体中掺杂稀土离子Eu^3 和Y，制备了Zn2SiO4:Eu及Zn2SiO4:Eu,Y纳米粉体，研究不同稀土离子浓度对荧光强度的影响，并采用热重－差热分析，X射线粉末衍射，荧光光谱分析等技术手段进行表征，目标产物的平均粒径分别为31nm和27nm。     

A Systematic Study of the Use of DL-Tartaric Acid in the Synthesis of Silica Materials Obtained by the Sol-Gel Method

DL-tartaric acid was used as a template for the formation of silica nanotubes and spheres by the sol-gel method from tetraethylorthosilicate (TEOS) as silica source. The reactions were carried out in ethanol/water mixtures in the presence of aqueous ammonia, between 0°C and 75°C, using both stirred and non-stirred conditions. TEM and SEM images show that the yield and microstructure of the silica is influenced by the synthetic conditions (temperature, ammonia (aq) concentration, gelation time, solvent mixture). It was observed that the chiral form of the tartaric acid used and the diffusion of TEOS to the template determines the eventual silica structure.     

Sulfide Gels and Films: Products of Non-Oxide Gelation

The preparation of concentrated sols and transparent stiff gels of II-VI semiconductors nanocrystals is reported. A two-step process for the production of cadmium sulfide is reported. Sol stabilization and gelation control are achieved through successive passivation and depassivation of the surface of the nanocrystals which are complexed with thiols. The mechanisms driving the aggregation and the gelation are explained on the basis of NMR and SAXS experiments. Thin films as well as monoliths can be produced. The general principles of the method presented are not restricted to chalcogenide systems and thus enlarge the domain of application of the inorganic sol-gel process.     

硼离子对铕掺杂SiO2干凝胶发光性能的影响

采用溶胶-凝胶法制备了Al单掺和B，Al共掺的Eu掺杂SiO2干凝胶。利用荧光光谱、IR，XRD，DSC，TG／DTG等技术研究了硼离子、退火温度对样品发光性质的影响。经500℃以上退火处理用248nm激发的样品，产生Eu^3＋离子^5D0→^7FJ的特征发射，^5D0→^7F1的跃迁分裂为两个峰。比较615nm处的发光强度，掺硼酸样品的发光强度是不加硼酸发光强度的3．3倍。这是因为B离子的加入，在材料中形成了Si—O—B键，破坏了网络的对称性，加强了Eu^3＋的红光发射。当退火温度上升到850℃用350nm激发时，样品有很强的Eu^2＋蓝光发射。Al单掺的发射中心在437nm处，发射半峰宽约为70nm，而B，Al共掺样品的发光中心蓝移到425nm处，单掺样品的蓝光强度几乎是共掺样品强度的2倍。这是由于硼酸的加入改变了基质的网络结构，从而导致单掺和共掺样品发射峰位和强度的改变。     

Preparation of La0.75Sr0.25MnO3 Nano-Phase Powders and Films from Alkoxide Precursors

The first purely alkoxide-based sol-gel route to nano-phase powders and thin films of perovskite La_0.75Sr_0.25MnO₃ is described. The phase and microstructure evolution on heat treatment of free gel films to form the target nano-phase oxide were investigated by TGA, IR spectroscopy, powder XRD, SEM and TEM-EDS. The xerogel consisted of a hydrated oxo-carbonate, without remaining alkoxo groups or solvent. Heating at 5°C·min^–1 decomposed the carbonate groups and yielded the pure perovskite La_0.75Sr_0.25MnO₃ at 760°C. The cell dimensions were virtually unchanged from the first observation of perovskite at 680°C, to 1000°C, 4 h. The monoclinic cell of La_0.75Sr_0.25MnO₃ obtained at 1000°C, 4 h, had the dimensions a = 5.475(1), b = 5.504(2), c = 7.771(1) Å, = 90.50(2), fitting the literature data quite well. Crack-free, homogenous, 150 nm thick La_0.75Sr_0.25MnO₃ films were prepared by spin-coating Si/SiO₂/TiO₂/Pt and polycrystalline -Al₂O₃ substrates with a 0.6 M alkoxide solution, followed by heating at 5°C·min^–1 to 800°C, 30 min.     

Emanation thermal analysis study of a sol-gel precursor for silica-titania waveguides

Emanation Thermal Analysis (ETA) was demonstrated as a tool for the characterization of microstructure changes of a sol-gel precursor for silica-titania layers deposited on the glass plate to be used as planar waveguides. Temperature ranges of 280-330 and 380-500°C, respectively, in which the densification of the layers took place, were determined by ETA under in situ conditions of the sample heating. Results of thermogravimetry were compared with the ETA data. This revised version was published online in August 2006 with corrections to the Cover Date.     

Atomistic Modeling of Silica Based Sol-Gel Processes

Density Functional Theory is used to study water, methanol, ethanol, TMOS, and TEOS molecules and the most important silica clusters participating in sol-gel processes. Calculated bond lengths, bond angles and electric dipole moments compare well with experimental data. The energy of these molecules is reported and used to discuss the energetics of the hydrolysis and condensation reactions. Molecular Dynamics is employed to simulate liquid water, methanol, ethanol, TMOS, TEOS and experimental sol-gel solutions. Calculated densities and enthalpies of vaporisation compare well with experimental data. Preliminary results are presented for MD simulations of sol-gel solutions.     

Effect of Solution Chemistry on Preparation of Boehmite by Hydrothermal Assisted Sol-Gel Processing of Aluminum Alkoxides

Various aluminum alkoxide precursors have been used for the preparation of boehmite by hydrothermal assisted sol-gel processing. The coordination status of aluminum in solution for all precursors employed for the preparation of boehmite phase was determined by ²⁷Al NMR and correlation between coordination status of aluminum atoms of precursors and development of boehmite phase has been investigated. Hydrothermal assisted hydrolysis of aluminum alkoxides where the aluminum atoms are four or five coordinated in solution resulted in the formation of boehmite. In contrast, hydrothermal hydrolysis of aluminum alkoxides where the aluminum atoms are six coordinated resulted in the formation of amorphous gel. Development of boehmite phase by hydrothermal hydrolysis of aluminum alkoxides at various temperatures was pursued by X-ray diffraction (XRD) and Fourier Transform Infrared (FTIR) spectroscopy.     

Synthesis of Nickel Supported Catalysts for Hydrogen Production by Sol-Gel Method

SiO₂ and Al₂O₃ supported Ni catalysts were synthesized in the form of xerogels: the SiO₂ based materials were prepared starting from Ni propionate or glycolate salts and reacting them with tetraethoxysilane (TEOS) in propionic acid, Si(ethylene glycolate) or sodium silicate. The Al₂O₃ supported catalysts were prepared similarly from Ni propionate salts with Al iso-propoxide salts. Narrow metal particles and strong metal support interactions are observed in the sol-gel catalysts. The metal dispersion was higher for Al₂O₃ based materials than the SiO₂ ones and it deeply depends on the Ni precursor for the silica supported Ni. Wet impregnated oxides with similar Ni loading have higher metal surface area than those from sol-gel processing. The influence of surface differences on the catalytic activity of the materials was studied following the CH₄ and CO₂ reaction in dry reforming conditions by pulse reaction tests.     

A sensitive mediator-free tyrosinase biosensor based on an inorganic-organic hybrid titania sol-gel matrix

A novel inorganic-organic hybrid titania sol-gel nanocomposite film was prepared to fabricate a sensitive tyrosinase biosensor for the amperometric detection of trace phenolic compounds without additional electron mediators. Acetylacetone worked as a complexing ligand to chelate with Ti atom in the synthesis process, and the pH of the titania solution could be adjusted to the value which was optimum for retaining tyrosinase activity and such a membrane was stably attached on to the surface of a glassy carbon electrode (GCE). This titania matrix could supply a good environment for enzyme loading, which resulted in a high sensitivity of 15.78 μA μM⁻¹ cm⁻² for monitoring phenols with a detection limit of 1×10⁻⁸ M at a signal-to-noise ratio of 3. The TiO₂ sol-gel derived biosensor exhibited a fast response less than 10 s and a good stability for more than 2 months.