Toxicological screening of human plasma by on‐line SPE‐HPLC‐DAD: identification and quantification of acidic and neutral drugs

A multi‐analyte screening method for the quantification of 50 acidic/neutral drugs in human plasma based on on‐line solid‐phase extraction (SPE)–HPLC with photodiode array detection (DAD) was developed, validated and applied for clinical investigation. Acetone and methanol for protein precipitation, three different SPE materials (two electro‐neutral, one strong anion‐exchange, one weak cation‐exchange) for on‐line extraction, five HPLC‐columns [one C₁₈ (GeminiNX), two phenyl‐hexyl (Gemini C₆‐Phenyl, Kinetex Phenyl‐Hexyl) and two pentafluorophenyl (LunaPFP(2), KinetexPFP)] for analytical separation were tested. For sample pre‐treatment, acetone in the ratio 1:2 (plasma:acetone) showed a better baseline and fewer matrix peaks in the chromatogram than methanol. Only the strong anion‐exchanger SPE cartridge (StrataX‐A, pH 6) allowed the extraction of salicylic acid. Analytical separation was carried out on a Gemini C₆‐Phenyl column (150 × 4.6 mm, 3 µm) using gradient elution with acetonitrile–water 90:10 (v/v) and phosphate buffer (pH 2.3). Linear calibration curves with correlation coefficients r ≥ 0.9950/0.9910 were obtained for 46/four analytes. Additionally, this method allows the quantification of 23 analytes for therapeutic drug monitoring. Limits of quantitation ranged from 0.1 (amobarbital) to 23 mg/L (salicylic acid). Inter‐/intra‐day precisions of quality control samples (low/high) were better than 13% and accuracy (bias) ranged from ?14 to 10%. A computer‐assisted database was created for automated detection of 223 analytes of toxicological interests. Four cases of multi‐drug intoxications are presented. Copyright © 2015 John Wiley & Sons, Ltd.     

面向大规模定制的建筑工业化住宅混合装配线平衡优化研究

为解决大规模定制工业化住宅混合装配线平衡问题,以预制构件均匀消耗为目标建立了混合装配线生产优化模型,并基于目标追随法(GCA)和建筑工业化住宅的建造特点,提出相应的求解算法.通过所构建的优化模型及算法,可对随机输入的工业化装配顺序进行优化,进而获得预制构件消耗速率均匀的优化装配顺序.最后,通过案例分析验证了优化模型的有效性,优化结果表明优化后的生产序列的预制构件消耗更为趋近于平均消耗水平,能够获得更为均匀的预制构件消耗速率,进而提升工业化住宅项目的准时性及效率.     

A Novel Approach to All-Optical Generation of Ultra-Wideband Signals

Abstract

The generation of ultra-wideband signals in the optical domain is highly desirable for ultra-wideband-over-fiber systems, which has recently become a topic of interest. In this article, a novel and simple approach to achieve all-optical generation of ultra-wideband signals is proposed, which is based on delaying and superimposing optical Gaussian pulses with opposite polarities. The proposed system is capable of generating both ultra-wideband monocycle and doublet pulses, and the polarity of the generated ultra-wideband monocycle pulses can be fast-switched to implement pulse polarity modulation with the required bit pattern. A model to describe the proposed system is developed, and the generation of ultra-wideband signals is demonstrated with simulations and a proof-of-concept experiment.     

Application of the transmission line matrix method for outdoor sound propagation modelling – Part 1: Model presentation and evaluation

The present paper deals with an original time-domain approach applied to outdoor sound propagation under meteorological effects. The transmission line matrix method, based on the Huygens’ principle, had already been validated over impedant grounds and complex topography. The presented formulation proposes to take into account meteorological effects (wind speed and temperature) through the relative sound speed. The necessary wavefront direction is determined through the calculation of the averaged intensity vector direction. A good agreement is found between simulations of both the transmission line matrix and parabolic equation methods. A relevant use of the method is shown in the framework of environmental acoustics and initial applications are proposed in Part 2.     

一种自适应人工蜂群算法求解U型顺序相依拆卸线平衡问题

产品拆卸过程中零部件之间会相互干扰影响任务作业时间,基于该情形构建了多目标U型SDDLBP优化模型,并提出一种自适应ABC算法。所提算法设计了自适应动态邻域搜索方法,以提高局部开发能力;采用了轮盘赌与锦标赛法结合的分段选择法,以有效评价并选择蜜源进行深度开发;建立了基于当前最优解的变异操作,以提高全局探索能力快速跳出局部最优。最后,通过算例测试和实例分析验证算法的高效性。     

Measurements in Situ and Spectral Analysis of Wind Flow Effects on Overhead Transmission Lines

In the paper an important issue of vibrations of the transmission line in real conditions was analyzed. Such research was carried out by the authors of this paper taking into account the cross-section of the cable being in use on the transmission line. Analysis was performed for the modern ACSR high voltage transmission line with span of 213.0 m. The purpose of the investigation was to analyze the vibrations of the power transmission line in the natural environment and compare with the results obtained in the numerical simulations. Analysis was performed for natural and wind excited vibrations. The numerical model was made using the Spectral Element Method. In the spectral model, for various parameters of stiffness, damping and tension force, the system response was checked and compared with the results of the accelerations obtained in the situ measurements. A frequency response functions (FRF) were calculated. The credibility of the model was assessed through a validation process carried out by comparing graphical plots of FRF functions and numerical values expressing differences in acceleration amplitude (MSG), phase angle differences (PSG) and differences in acceleration and phase angle total (CSG) values. Particular attention was paid to the hysteretic damping analysis. Sensitivity of the wave number was performed for changing of the tension force and section area of the cable. The next aspect constituting the purpose of this paper was to present the wide possibilities of modelling and simulation of slender conductors using the Spectral Element Method. The obtained results show very good accuracy in the range of both experimental measurements as well as simulation analysis. The paper emphasizes the ease with which the sensitivity of the conductor and its response to changes in density of spectral mesh division, cable cross-section,tensile strength or material damping can be studied.     

Structural and Thermodynamic Peculiarities of Core-Shell Particles at Fluid Interfaces from Triangular Lattice Models

A triangular lattice model for pattern formation by core-shell particles at fluid interfaces is introduced and studied for the particle to core diameter ratio equal to 3. Repulsion for overlapping shells and attraction at larger distances due to capillary forces are assumed. Ground states and thermodynamic properties are determined analytically and by Monte Carlo simulations for soft outer- and stiffer inner shells, with different decay rates of the interparticle repulsion. We find that thermodynamic properties are qualitatively the same for slow and for fast decay of the repulsive potential, but the ordered phases are stable for temperature ranges, depending strongly on the shape of the repulsive potential. More importantly, there are two types of patterns formed for fixed chemical potential—one for a slow and another one for a fast decay of the repulsion at small distances. In the first case, two different patterns—for example clusters or stripes—occur with the same probability for some range of the chemical potential. For a fixed concentration, an interface is formed between two ordered phases with the closest concentration, and the surface tension takes the same value for all stable interfaces. In the case of degeneracy, a stable interface cannot be formed for one out of four combinations of the coexisting phases, because of a larger surface tension. Our results show that by tuning the architecture of a thick polymeric shell, many different patterns can be obtained for a sufficiently low temperature.     

Development of nanomaterial chemosensors for toxic metal ions sensing

Heavy metal ions are harmful to aquatic life and humans owing to their high toxicity and non‐biodegradability, so their removal from wastewater is an important task. Therefore, this work focuses on designing suitable, simple and economical nanosensors to detect and remove these metal ions with high selectivity and sensitivity. Based on this idea, different types of mesoporous materials such as hexagonal SBA‐15, cubic SBA‐16 and spherical MCM‐41, their chloro‐functionalized derivatives, as well as 4‐(4‐nitro‐phenylazo)‐naphthalen‐1‐ol (NPAN) azo dye have been synthesized, with the aim of designing some optical nanosensors for metal ions sensing applications. The mentioned azo dye has been anchored into the chloro‐functionalized mesoporous materials. The designed nanosensors were characterized using scanning and transmission electron microscopy as well as Fourier transform infrared and UV–visible spectral analysis, nitrogen adsorption–desorption isotherms, low‐angle X‐ray diffraction and thermogravimetric analyses. Their optical sensing to various toxic metal ions such as Cd (II), Hg (II), Mn (II), Fe (II), Zn (II) and Pb (II) at different values of pH (1.1, 4.9, 7 and 12) was investigated. The optimization of experimental conditions, including the effect of pH and metal ion concentration, was examined. The experimental results showed that the solution pH had a major impact on metal ion detection. The optical nanosensors respond well to the tested metal ions, as reflected by the enhancement in both absorption and emission spectra upon adding different concentrations of the metal salts and were fully reversible on adding ethylene diamine tetra acetic acid or citric acid to the formed complexes. High values of the binding constants for the designed nanosensors were observed at pHs 7 and 12, confirming the strong chelation of different metals to the nanosensor at these pHs. Also, high binding constants and sensitivity were observed for NPAN‐MCM‐41 as a nanosensor to detect the different metal ions. From the obtained results, we succeeded in transforming the harmful azo dye into an environmentally friendly form via designing of the optical nanosensors used to detect toxic metal ions in wastewater with high sensitivity.