Adaptation of a commercial ion selective fluoride electrode to a tubular configuration for analysis by flow methodologies

The determination of fluoride ions in water samples is accomplished by using a tubular flow through detector constructed by drilling a channel through a commercially available LaF(3) crystal electrode in such a way that the original contacts of the non-modified unit are maintained. Its performance when incorporated in both FIA and SIA systems was evaluated and the results show that the tubular unit retains the characteristics of the non-modified electrode. In SIA conditions an extended linear range of response and lower detection limit were achieved when compared with the electrode performance in FIA conditions. These aspects together with the additional advantage of low sample and reagent consumptions in SIA when compared to FIA, makes the incorporation of the proposed tubular ISE in a SIA system the preferred approach for on line determination and monitoring of fluoride content in natural water samples.     

Host-guest Assembly Based on γ-Cyclodextrin-functionalized Multiwalled Carbon Nanotubes for Rutin Electrochemical Sensing

Here, we report multiwalled carbon nanotubes (MWCNTs) functionalized with γ-cyclodextrins (γCD) as a novel electrochemical strategy for Rutin determination, showing superior performance than β-cyclodextrins (βCD) modified MWCNTs, suggesting an adequate environment for host-guest interactions. Under optimized conditions, the sensor showed a linear range of 39–975 nmol L⁻¹ and a limit of detection of 7 nmol L⁻¹. When tested with quercetin, catechin, and caffeine, the platform presented high selectivity with an interference response <10 %. The method was employed to quantify Rutin in spiked pharmaceutical and herbal extracts, providing recovery of 93–98.4 %. Also, HPLC-PDA confirmed the method‘s accuracy.     

Gas-phase oxidation of Cm+ and Cm2+ --thermodynamics of neutral and ionized CmO

Fourier transform ion cyclotron resonance mass spectrometry was employed to study the products and kinetics of gas-phase reactions of Cm (+) and Cm (2+); parallel studies were carried out with La (+/2+), Gd (+/2+) and Lu (+/2+). Reactions with oxygen-donor molecules provided estimates for the bond dissociation energies, D[M (+)-O] (M = Cm, Gd, Lu). The first ionization energy, IE[CmO], was obtained from the reactivity of CmO (+) with dienes, and the second ionization energies, IE[MO (+)] (M = Cm, La, Gd, Lu), from the rates of electron-transfer reactions from neutrals to the MO (2+) ions. The following thermodynamic quantities for curium oxide molecules were obtained: IE[CmO] = 6.4 +/- 0.2 eV; IE[CmO (+)] = 15.8 +/- 0.4 eV; D[Cm-O] = 710 +/- 45 kJ mol (-1); D[Cm (+)-O] = 670 +/- 40 kJ mol (-1); and D[Cm (2+)-O] = 342 +/- 55 kJ mol (-1). Estimates for the M (2+)-O bond energies for M = Cm, La, Gd, and Lu are all intermediate between D[N 2-O] and D[OC-O] - that is, 167 kJ mol (-1) < D[M (2+)-O] < 532 kJ mol (-1) - such that the four MO (2+) ions fulfill the thermodynamic requirement for catalytic oxygen-atom transport from N2O to CO. It was demonstrated that the kinetics are also favorable and that the CmO (2+), LaO (2+), GdO (2+), and LuO (2+) dipositive ions each catalyze the gas-phase oxidation of CO to CO2 by N2O. The CmO 2 (+) ion appeared during the reaction of Cm (+) with O 2 when the intermediate, CmO (+), was not collisionally cooled - although its formation is kinetically and/or thermodynamically unfavorable, CmO 2 (+) is a stable species.     

Complete and unambiguous assignments of 1H and 13C chemical shifts of new arylamino derivatives of ortho-naphthofuranquinones

Six new nor-beta-lapachones have been synthesized from reaction of 3-bromo-nor-beta-lapachone with arylamines. These derivatives have potent anticancer properties against several cell lines. Here, we report complete unambiguous assignments of (1)H and (13)C chemical shifts of the new compounds. The assignments were made using a combination of one- and two-dimensional NMR techniques ((1)H, (13)C, (1)H-(1)H COSY, (1)H-(13)C HSQC, and (1)H-(13)C HMBC).     

Asymptotic stability and bifurcations of 3D piecewise smooth vector fields

The paper deals with the analysis of the behavior of a nonsmooth three-dimensional vector field around a typal singularity. We focus on a class of generic one-parameter families \({Z_{\lambda}}\) of Filippov systems and address the persistence problem for the asymptotic stability when the parameter varies near the bifurcation value \({\lambda = 0}\).     

Validation of a high-performance liquid chromatographic method with fluorescence detection for the simultaneous determination of tetracyclines residues in bovine milk

A high-performance liquid chromatography-fluorescence detection method was optimized and validated to determine tetracyclines residues in bovine milk. Post-column derivatization using metal complexation in non-aqueous reagent increased the fluorescence of chelates by a factor up to 2.54 compared to water (signal-to-noise ratio enhancement). Overall recoveries ranged from 61 to 115%, with RSD_r from 5 to 15% (n = 54). Detection limits ranged from 5 to 35 μg kg⁻¹. Limits of quantification were established at 50 μg kg⁻¹. Decision limits (CCα) were 109, 108 and 124 μg kg⁻¹ and detection capabilities (CCβ) 119, 117 and 161 μg kg⁻¹ for oxytetracycline, tetracycline and chlortetracycline, respectively. The method was applied successfully in a national monitoring program.     

Infrared spectroscopy and outer product analysis for quantification of fat, nitrogen, and moisture of cocoa powder

The combination of the near infrared (NIR) and Fourier-transform infrared (FTIR) absorbance spectra (1100-2500 nm and 4000-600 cm⁻¹) of 100 cocoa powder samples was used to build calibration models for the determination of the content of fat, nitrogen, and moisture. The samples that comprised the dataset had an average composition of 13.51% of fat, 3.77% nitrogen, and 3.98% moisture. The fat content ranged from 2.42 to 22.00%, the nitrogen from 0.88 to 4.48%, and moisture from 1.60 to 7.80%. For NIR, the relative root mean square error of cross-validation (RMSECV) was 7.0% (R² = 0.96) for fat, 1.7% (R² = 0.98) for nitrogen, and 5.2% (R² = 0.94) for moisture. For FTIR, the relative RMSECV was 10.4% (R² = 0.94) for fat and 3.9% (R² = 0.95) for nitrogen. However, for moisture, it was not possible to build a calibration model with suitable predictability. The combination of the NIR and FTIR domains (data fusion) by outer product analysis PLS1 allowed to predict these parameters and to characterise frequencies in one domain based on the information of the other domain. This work allows to conclude that the second derivative of NIR is the recommended procedure to quantify fat, nitrogen, and moisture content in cocoa powders by infrared spectroscopy.     

A multi-commuted flow injection system with a multi-channel propulsion unit placed before detection: Spectrophotometric determination of ammonium

A flow system with a multi-channel peristaltic pump placed before the solenoid valves is proposed to overcome some limitations attributed to multi-commuted flow injection systems: the negative pressure can lead to the formation of unwanted air bubbles and limits the use of devices for separation processes (gas diffusion, dialysis or ion-exchange). The proposed approach was applied to the colorimetric determination of ammonium nitrogen. In alkaline medium, ammonium is converted into ammonia, which diffuses over the membrane, causing a pH change and subsequently a colour change in the acceptor stream (bromothymol blue solution). The system allowed the re-circulation of the acceptor solution and was applied to ammonium determination in surface and tap water, providing relative standard deviations lower than 1.5%. A stopped flow approach in the acceptor stream was adopted to attain a low quantification limit (42 μg L⁻¹) and a linear dynamic range of 50–1000 μg L⁻¹ with a determination rate of 20 h⁻¹.     

Surface tensions of imidazolium based ionic liquids: anion, cation, temperature and water effect

This work addresses the experimental measurements of the surface tension of eight imidazolium based ionic liquids (ILs) and their dependence with the temperature (288-353 K) and water content. The set of selected ionic liquids was chosen to provide a comprehensive study of the influence of the cation alkyl chain length, the number of cation substitutions and the anion on the properties under study. The influence of water content in the surface tension was studied for several ILs as a function of the temperature as well as a function of water mole fraction, for the most hydrophobic IL investigated, [omim][PF(6)], and one of the more hygroscopic IL, [bmim][PF(6)]. The surface thermodynamic functions such as surface entropy and enthalpy were derived from the temperature dependence of the surface tension values.